HBM 13 mm Professional Variable Precision Pillar Drilling Machine with Laser and Digital Readout

This is the ideal drill string for the modeller, the mobile handyman and the young apprentice! This drill press is not only beautiful to look at, but has a well-considered design in all respects.

This drill press has the following very favorable properties:

• The machine is light and therefore easy to move on any table.

• A digital readout of the drilling depth and spindle speed

• The drilling depth has a zero setting on the control panel

• Very ergonomic handles are pleasant to work with

• The height adjustment of the motor housing is smooth and easy to adjust with a crank.

• The powerled workpiece lighting can be switched on and off via the front panel.

• A cross laser (2 line lasers) indicates where to drill.

• The spindle is equipped with a quick-release chuck with 1.5 - 13 mm mounting.

• The spindle is equipped with an adjustable mechanical drilling depth stop.

• A machine clamp for mounting on the aluminum base is included.

• The machine is equipped with a two-stage reduction gear.

• The speed can be varied electronically from the front. The machine always starts at the lowest speed and must then be brought to the desired speed from the control panel. This is a safety consideration, which also makes the machine suitable for the less experienced user (schools). Depending on the gear reduction position, the speed that can be achieved is adjustable from 100 to 870 rpm or from 220 to 2500 rpm.

These features make this machine a tool well suited to the precision work of the modeller, safe enough for the young apprentice (schools), and powerful enough for the professional looking for a light drill string to take to the job. , with which you can look good.

Article number: 14455-E