HBM prof vacuum dent removal set, impact extractor, dent removal without spraying

With the HBM Prof Vacuum Dent Removal Set, Impact Puller, Dent Removal without spraying, you can repair small dents in your car quickly and easily. The dent puller works on the basis of air pressure and first of all creates a vacuum at the place of the dent. Depending on the size of the damage, you can use one of the three supplied air pads with a diameter of 60, 120 or 150 mm. You then use the impact weight of the dent puller, which can generate an impact force of up to 100 kg, to repair the dent. Thanks to this method, there is no need to drill a hole in the body panel and you can start finishing the damage right away.

Technical specifications

• Supplied with 3 interchangeable suction heads with a diameter of 60, 120, 155 mm
• Strike weight: 1,500 grams
• Length: 620mm
• Connection: 1/4" compressed air connection with 330 mm air hose
• Pulling force up to 100 kg
• Working pressure: 5-12 Bar (90-150 psi)
• Recommended operating pressure from 6.3 to 10.5 Bar
• Slide hammer: 1500 grams

The HBM Prof Vacuum Dent Removal Set, Impact Puller, Dent Removal without spraying is the ideal solution for quickly and easily repairing small dents in your car. Using air pressure and a vacuum, you can remove the dent without having to drill holes in the body panel. The set comes with three air pads with different diameters, so you can choose the right size for every damage. With a maximum impact force of 100 kg and a sliding hammer of 1500 grams, this set is powerful enough to repair even the most difficult dents. Order the HBM Prof Vacuum Dent Removal Set, Hammer Puller, Dent Removal without spraying now and make your car like new again in no time!

Article number: 4299-E