Workplace equipment Products

Olimpia Spl. CALDORAD 11 Convector Heater

(1)

The Olimpia Splendid CaldoRad 11 electric radiator with thermostat provides uniform, pleasant heat in a room of up to 30 m². This Olimpia Splendid oil radiator has a silent operation and is perfectly suited for use at home, at the office or in the caravan. The CaldoRad 11 oil-filled radiator has a maximum capacity of 2500W and has useful functions such as tip-over protection, overheating protection and frost protection. Electric oil radiator 3 modes (eco 1200W/1300W/2500W) Tip-over protection Overheating protection Frost protection Electric heating with thermostat Specifications Dimensions (LxWxH): 50x23.5x62 cm 230V/50Hz 12.3 kg Air outlet: Other Colour White Depth: 2500mm Frost protection circuit: Yes Height: 620mm Version: Convector heater Mounting method: Freestanding model Number of switch positions: 3 Control panel position: Side Type: Electric Weight: 12.3 kg Width: 235mm With time switch: Yes Item number: OS996180 Bar code: 8021183996180 Brand: Olimpia Splendid Net weight (kg): 0

HBM large funnel 4 liters

Content 4 Liter. |Dimensions 28 x 19 x 29,5 cm. |

HBM professional storage trays

All our products have a warranty of at least 1 year.

HBM High Pressure Airless Spraying Machine Paint Sprayer Wall Spraying Machine Set 1010 Watt

(1)

Do you want to apply wall paint to walls quickly and without streaks? This is easy with the HBM High Pressure Airless Spraying Machine Paint Sprayer Wall Spraying Machine. This special device sprays all types of sprayable wall paint without any problems on walls and walls under very high pressure through a ten meter long hose. Thanks to the sturdy metal stand, you can place the sprayer anywhere and it is an asset for both professional painters and DIY enthusiasts. The nozzle can be used both horizontally and vertically and it is possible to place various nozzles in the nozzle. The silicone inlet hose has a large, weighted suction mouth with filter at the end, so that no hard paint particles are sucked in. Suitable for both professionals and DIY enthusiasts Spray all types of sprayable wall paint on walls and walls without any problems Maximum output: 1.5 liters per minute Maximum spray pressure: 3000 PSI / 206 bar Dimensions: 38.5 x 27 x 43 centimeters Product specifications Power: 1010 Watts Maximum output: 1.5 liters per minute Maximum spray pressure: 3000 PSI / 206 bar Dimensions: 38.5 x 27 x 43 centimeters

HBM 200 kg. mdf transport dolly

(1)

Dimensions 580 x 300 x 100 mm. |Maximum load capacity 200 Kg. |Wheel diameter 50 mm. |

HBM electric liquid pump, siphon pump including batteries.

(1)

Material Kunststof. |Color Blauw / Zwart. |Tension 1,5 Volt |Capacity 560 liter/uur |Battery type R20P 1,5 Volt. |

HBM 1500 x 30 mm. impact iron

(1)

Total length 1500 mm |Diameter 30 mm |

HBM cement spray gun, mortar spray gun

(1)

This stainless steel mortar funnel gun is suitable for spraying different types of mortar, glass fiber reinforced concrete and other materials. Can be sprayed in a coarse 3 mm. grain up to 2.5 cm thick structural layers. It can also be used for applying other mortars such as exterior wall insulation mortar or loam. Most important features: Funnel made of stainless steel Installed 4-hole spray plate is easy to slide aside, remove and clean Swivel joint between handle and hopper for easy working Spray: Sand / cement slurries, sprayable mortars, grout, glass fiber reinforced concrete, fire resistant mortars and other materials Recommended compressor 340 liters per minute at 6.9 BAR

HBM 63 liter concrete mixer, concrete mixer

(2)

Nominal Voltage 230 Volt, 50 Hz. |Engine power 650 Watt. |Drum speed 27,5 O/min. |Drum content 63 Liter. |Drum opening diameter 267 mm. |Material Staal. |Overall dimensions 110 x 55 x 93,5 cm (L x B x H) |

HBM 120 cm. hobby workbench with mdf sheet

Overall dimensions 122 x 61 x 90 cm. ( Lxbxh ) |Dimensions of the worktop 120 x 60 cm. |Thickness of the worktop 12 mm. |

BRICK 3000W generator with wheels

This inverter generator from Brick is the perfect tool to power all your devices. Whether for home use or on a construction site, it adapts to all needs. The generator has an electronic voltage regulation system (AVR) depending on the load of the generating set. Robust and reliable, this generating set offers you many services. It has a 15 liter metal fuel tank for a range of 6 hours. Transport your generator easily thanks to the wheels and handle. An inverter generating set is a generator that fully restores the power supplied by the alternator before redistributing it. The voltage and frequency are then more stable. In addition, it varies its motor speed in relation to what you will be connecting, making it a perfectly suitable generator for any equipment that does not support voltage variations, such as electronic devices. By reducing the engine speed, it is also possible to use less fuel. Finally, this generator also has a metal fuel tank of 15 liters, 2 sockets and a carrying handle. This product has a 3-year warranty. Functions: - Maximum power: 3000W - Continuous power: 2800W - Metal fuel tank: 15L - Oil tank: 0.6L - Maximum autonomy: 6h - 2 sockets - Equipped with wheels and a carrying handle - APR - Comes in a color box - 3 year warranty Technical features Maximum power: 3000 W Maximum current: 13 A Sound pressure level: 96 dB Nominal power: 2.8 kW Number of contacts: 2 Output voltage: 230 V Peak power: 3000 W Power: 2800 W Speed disengaged: 4000 rpm Fuel tank capacity: 15 L Engine air-cooled: Yes Operating time: 7 h Engine oil reservoir capacity: 0.6 L Cylinder capacity: 208 cm³ Energy source of powered tools: Gasoline Motor fuel type: Gasoline Clutch engagement speed: 4000 rpm EAN/GLN code: 5411074199579 Weight: 43.50 kg

HBM magnetic spray can holder

With the HBM Magnetic Spray Can Holder you are assured of a simple and luxurious solution for storing your spray cans and bottles. This product is an additional option for the tool trolleys used by many garages. Thanks to this tool holder you can easily and quickly have all spray cans within reach. Characteristics of the HBM Magnetic Spray Can Holder Sheet steel product with powder coating and 8 magnets Suitable for almost any spray can or bottle with a maximum diameter of 75 mm Holds up to 3 spray cans or bottles and 7 screwdrivers: 2x diameter 11.5mm 2x diameter 10.5mm 1x diameter 9.5mm 1x diameter 8mm 2x diameter 7mm This spray can holder is therefore not only suitable for spray cans, but also for screwdrivers. The magnetic action guarantees that your tools stay firmly in place. HBM: A Reliable Guarantee The HBM Magnetic Spray Can Holder is manufactured by the renowned HBM brand. With a reputation for reliability and quality, you can be assured of a product that will meet all your expectations. The powder coating guarantees that the product is strong, durable and will last for a long time. Order the HBM Magnetic Spray Can Holder now and enjoy an organized and quick solution for your tools. This product is a must-have for every garage and ensures efficiency and convenience in your daily work.

HBM car tires and motorcycle tires disassemble device

(2)

HBM Car tires and motorcycle tires disassemble device Changing tires has never been so easy with the HBM car tires and motorcycle tires demounting device! Ideal for the do-it-yourselfer, this fully manual device makes changing tires easy to do yourself. The device is suitable for motorcycle and car tires from 4 to 16.5. How does a tire dismounting device work? Using the push bar at the bottom of the device, you can easily remove the tire from the rim. Do this all the way around on both sides. The push rod is adjustable in height by a locking pin. Then fix the rim on three hooks on the top of the device. With the tire iron, you flip the tire all around over the rim due to the lever effect. You do this on both sides and the tire is off the rim. Technical data: Suitable for motorcycle and car tires from 4 to 16.5 Completely manual With the HBM car tires and motorcycle tires dismantling device, changing tires is now a piece of cake!

HBM 6-layer shelf storage brackets, storage rack

(2)

The HBM 6 Layer Shelf Storage Brackets are a must-have for every workshop, garage or shed. The storage rack creates generous storage space for wood, pipes and other long items. It can be mounted both indoors and outdoors on fences, walls, etc. Technical data of the HBM 6 Layer Planks Storage Brackets, storage rack: Capacity - maximum load: 50 kg per level. Material - primary construction: Steel. Number of shelves: 6 Levels. Height: 1038mm. Length: 300mm. Weight: 7.49 Kg. Width: 300mm. The HBM 6 Tier Shelf Storage Brackets are easy to install and come with 12 racks, 12 end caps, 12 1/14" pan head screws 6 gauge, 2 posts and 6 spacers. With these storage brackets you create the ultimate storage space and keep your workshop, garage or shed organized and tidy.

HBM 12-piece chain tool and latch set

The HBM 12 Piece Chain Tool and Latch Set is a professional tool specially designed to save you time when removing and installing camshaft and drive chains. Suitable for light and medium chains of motorcycles, passenger cars and light vans with a chain diameter of #35 to #630. Specifications Suitable for camshaft and drive chains For light and medium heavy chains Chain diameter from #35 to #630 With 3 drift pins (drifts) in 2.2 | 2.9| 3.8 diameter Packed in plastic case With this set you can assemble and disassemble chains quickly and easily. The different pins allow you to easily adjust the chain to the correct size and ensure trouble-free operation of the chain. HBM is proud to introduce this Chain Tool and Latch Set that meets the requirements of professionals while remaining affordable. This makes it easier to work quickly, efficiently and safely without incurring high costs for hiring professionals. Save time and money with HBM 12 Piece Chain Tool and Latch Set. Order now!

HBM universally adjustable press block for workshop press

Maximum load 30 Ton. |

HBM stainless steel oil drip plate, drip tray, oil collecting tray 600 x 400 x 48 mm.

(1)

Technical data of the HBM stainless steel oil drip tray, drip tray, oil catch tray 600 x 400 x 48 mm. Dimensions 600 x 400 x 48 mm. Ideal for parking your car or while tinkering. Made from SS201 stainless steel. Easy to clean.

HBM Vacuum Pump 1 Stage with 2-Fold Pressure Gauge Set 60 Liters Per Minute

This complete refrigerant set contains the HBM vacuum pump and the 2-fold pressure gauge set. The vacuum pump is designed for professional use in refrigeration and air conditioning systems. It creates a vacuum, which makes it possible to retrofit the air conditioning with refrigerant. The pump is suitable for refrigeration recovery, printing machinery, medical equipment, vacuum packaging, hot forming and other extraction work. The pump has an aluminum housing and a practical oil sight glass, with which you can check the oil level at any time. It also has an integrated handle for easy transport. The 2 way pressure gauge set is suitable for filling and inspecting air conditioning systems by reading system pressure readings. It is suitable for use on all automotive A/Cs, and commercial and domestic A/C refrigeration systems. The color coded gauges are quick, clear and easy to read. The gauges are encased in a protective bumper to prevent damage. You can use the integrated steel hook to hang the gauges quickly and easily. The pressure gauge set has a durable construction. Technical specifications: Voltage: 230 Volts Power: 180 Watt (1/4 HP) Suction power: 60 liters per minute Pump Speed: 2.5 CFM Rotational speed: 1,440 O/min Oil capacity: 250 ML Hose length: 152 cm Burst Pressure: 2,500 PSI Maximum working pressure: 500 PSI Suitable for refrigerants R134a, R22, R12 and R502 The HBM 1-stage vacuum pump with 2-fold pressure gauge set 60 liters per minute is supplied with 3 hoses, 2 quick couplings with an adapter for the car, and a gauge glass for checking the coolant.

CFH oxygen bottle

With the CFH Oxygen bottle you always have enough oxygen at hand to be able to weld with the Lasfix SF3100. The oxygen bottle has a capacity of 1 liter and can contain up to 105 bar of pressure (which corresponds to 105L). The oxygen cylinder is equipped with a threaded connection with an M11 x 1 left-hand thread, so that it fits perfectly on the Lasfix SF3100. Most important features: Content: 1 litre Pressure: up to 105 bar Suitable for Lasfix SF3100 Threaded connection: M11 x 1 left hand thread With the CFH Oxygen bottle you are always assured of a reliable and high-quality source of oxygen, which you need to be able to weld with the Lasfix SF3100. The oxygen bottle is also very practical and easy to use, thanks to the handy threaded connection and the compact size. Order your CFH oxygen bottle today and get started with the Lasfix SF3100!

HBM hydraulic wheel hub puller 10 tons

(2)

Technical data of the 10 ton HBM Hydraulic Wheel Hub Puller. Specially for stuck and rusted wheel hubs. 10 Ton hydraulic spindle For 4 and 5-bolt wheel hubs Hole diameter 96-125 mm Spindle hand control Suitable for: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot and Citroen

HBM 9-piece inner bearing puller set with impact puller

Size range 8 mm. ( 8-10 mm. )10 mm. ( 10-12 mm. )12 mm. ( 12-14 mm. )15 mm. ( 15-17 mm. )17 mm. ( 17-20 mm. )20 mm. ( 20-24 mm. )25 mm. ( 25-29mm. )30 mm. (30-32 mm. ) |

HBM oil drip tray 110 x 60 cm

Dimensions 110 x 60 cm. |Height 4 cm. |Material Polyethyleen. |

HBM 12 volt electric diesel pump, fuel oil pump 175 watts

(1)

Engine power 175 Watt. |Voltage 12 Volt. |Engine speed 3600 O/min. |Pump capacity 45 Liter per minuut. |Maximum suction lift 3 Meter. |Maximum pump height 10 Meter. |

HBM professional manual oil and liquid pump

Length of the pump 400 mm. |Diameter of the pump 70 mm. |Capacity 500 CC. |Length of the hose 280 mm. |

HBM adjustable construction prop with automatic locking 115 - 290 cm - 30 kg

The HBM Adjustable Building Prop with Automatic Locking is the ideal solution for supporting temporary structures and creating enclosed workspaces. It is a height-adjustable building prop with a simple, one-handed ratchet system and rotating panels. Fine-tuning swivel end cap to suit any surface Suitable for any surface Adjustable from 1.15 to 2.9 meters Maximum vertical capacity of 40 kg Plate dimensions of the stamp: 125 x 75 mm Equipped with automatic locking The building stamp is perfect to use in combination with polythene sheets to create a closed workspace. Thanks to the automatic locking, you don't have to worry about the safety of the construction, because the prop locks automatically as soon as it is at the right height. The HBM Adjustable Building Prop with Automatic Lock has a maximum capacity of 30 kg and is perfectly suited for supporting temporary structures such as walls, ceilings and timber frame construction. This building prop is designed for years of trouble-free use on the construction site.

HBM 4000 kg. hand lever hoist

Capacity 4000 Kg. |Cable length 300 cm. |Cable diameter 6 mm. |Number of hooks 3. |Dimensions 78 x 10 x 11 cm. |

HBM 230 Volt Electric Bicycle Lift 100 Kg.

(7)

With the HBM 230 Volt Electric Bicycle Lift 100 Kg. you can easily lift bicycles and similar vehicles for maintenance, storage or repairs. Thanks to the central part and the various straps, the bike can be safely hung. Product specifications: Elevator dimensions: 29.7 x 112.2 x 17.2 cm (WxLxH) Maximum load: 100 kg Voltage: 230 V Frequency: 50 Hz Amperage: 2.0A Power: 450 W Remote control cable length: 3 meters Weight: 11 kg With this electric bicycle lift you make maintaining and repairing your bicycle a lot easier. The lift can carry a weight of up to 100 kg and is equipped with a handy remote control with a 3 meter cable. With the HBM 230 Volt Electric Bicycle Lift 100 Kg. you have your bike quickly and safely at the right height.

HBM telescopic pick up magnets

Adjustable from 16,5 tot 84 cm. |Capacity 700 Gram. |Diameter Cup 7 mm. |Capacity 900 Gram. |Capacity 2250 Gram. |Capacity 3600 Gram. |

HBM shavings and chip catcher model 2

Total length 375 mm. |

HBM Professional Electric Chain Hoists

Maximum capacity 150 Kg. |Voltage 230 Volt. |Power 205 Watt. |Maximum lifting height 300 Cm. |Lifting speed 230 Cm per Minuut. |Diameter of the chain 4 mm. |Dimensions 288 x 221 x 442 mm. (L x B x H) |Maximum capacity 300 Kg. |Power 410 Watt. |Lifting speed 300 Cm per Minuut. |Diameter of the chain 5 mm. |Dimensions 382 x 176 x 600 mm. (L x B x H) |Maximum capacity 500 Kg. |Power 500 Watt. |Lifting speed 280 Cm per Minuut. |Diameter of the chain 6,3 mm. |