Battery chargers and jump starters Products

HBM 160 ampere professional battery tester, 12 volts, 10-160ah

(2)

Measuring the starting capacity: This battery tester is ideal for measuring the starting capacity of your battery. Battery condition: The tester detects whether your battery is in good or bad condition. Troubleshooting: The tester also detects problems in your vehicle's charging circuit that could damage your battery or other electronics. Quick result: You get a result in just 15 seconds. Test the starting capacity: With this battery tester you can easily test the starting capacity of your battery. Battery status: You also get information about the status of your battery. State of charge: With this tester you can check the state of charge of your battery. Voltage of the alternator: The voltage of your alternator is also measured. For lead-acid batteries up to 160 Ah: This battery tester is suitable for lead-acid batteries with a capacity of up to 160 Ah. With the HBM 160 Ampere Professional Battery Tester you can easily check the condition of your battery. With this battery tester you can not only measure the starting capacity of your battery, but also check the state of charge of your battery and measure the voltage of your alternator. In addition, this tester provides information about the status of your battery and allows you to detect problems in your vehicle's charging circuit before they cause damage. This battery tester is ideal for anyone who wants to keep their battery in top condition and prevent problems. The HBM 160 Ampere Professional Battery Tester is from the HBM brand and suitable for lead-acid batteries with a capacity of up to 160 Ah.

Scangrip Charger for Nova 3K C + R / Vega Lite 1500

(1)

Charger for Scangrip NOVA 3K C + R & VEGA 1500. Specifications: Article number: 03.5335 Barcode: 5708997353356 Brand: SCANGRIP Net weight (kg): 0.48 Type of accessories / parts: Charger Logo 2: Instruction manual:

HBM professional battery charger, start booster 12, 24 volts 92 â € “210 ah

(1)

Reference capacity Battery Min. 92 Ah - Max. 210 Ah |Fuse 30A. |

HBM professional car start booster, jump starter battery booster, 230 v, 12 v, 22 ah

Kind Starthulp. |Tension 12 Volt. |Capacity 22 Ah. |Peak current 1250 AMPS. |Height 300 Mm. |Width 320 Mm. |Depth 220 Mm. |

HBM starting aid and battery charger 230 Volt 12 - 24 Volt

The HBM jump start and battery charger is a handy and versatile device for charging and starting batteries. With a mains voltage of 230 volts and a frequency of 50 hertz, this battery charger is suitable for use at home or at the office. The voltage rating for charging and starting is 12-24 Volt and has a max input start of 9000 watts. Efficient charging is possible with a current of 75 A, while conventional charging has a current of 50 A. The device also has a starting peak current of 0V of 500 A and a starting peak current of 1.5V of 300 A. The nominal reference capacity min/max is 20/800 Ah. The HBM jump start and battery charger is a versatile device that is suitable for different batteries and vehicles. The device has a weight of 23 kg, which makes it easy to carry and transport. Characteristics: Mains voltage: 230 V, 50 Hz Charge/start voltage: 12-24 V Max input start: 9000 W Current of efficient charging: 75 A Current of conventional charging: 50 A Starting peak current 0V: 500 A Starting peak current 1.5V: 300 A Nominal reference capacity min/max: 20/800 Ah Weight: 23 kg

HBM 4 in 1 Jump Starter Power Station 12V - 20AH

Power station, jump starter, tire inflator, lighting in one compact portable housing. Small enough to always take with you and powerful enough to start even a heavy van with a completely empty battery. The internal battery of this auxiliary station is capable of supplying your car or motorcycle with a starting current of 450A (900A peak). This will get every vehicle going again! The starting current is transferred via short thick copper cables and two sturdy battery terminals that guarantee that little current is lost. This internal battery can be charged with the supplied adapter. The built-in voltmeter on the front shows how large the charging current is with which the internal battery is charged. This internal battery is also the power source of the built-in compressor. This compressor can deliver a pressure of 10 bar. The air hose is stored in a separate compartment, which is long enough to place this power station at a distance of more than half a meter from the tire. The inflation of motorcycle and car tires is thus achieved in a very short time. Adapters are also included (in a separate compartment) to inflate balls and air mattresses. With the pressure gauge on the back you can see exactly how much pressure there is in the tire. On the side there is an output for 12 Volt equipment (cigarette lighter type), with which this station can fulfill a power bank function. There is a clear rotary knob on the front that disconnects the battery from the power station, so that it can never be drained by a leakage current. With the green button on the front a strong LED lamp can be switched on and off. The red button is there to check the status of the internal battery and to determine whether it already needs to be charged. This power station can save you from many problematic situations and is a very handy and portable device to always carry in the trunk. Technical data of the HBM 4 in 1 Jumpstarter Powerstation 12V - 20AH. Type Starting aid. Voltage 12 Volts. Power supply 12 Volt. Capacity 20 Ah. Peak current 900 AMPS. Height 370mm. Width 345mm. Depth 150mm. Other specifications. Equipped with battery check function with indicators. Equipped with LED lighting. 1 x 12 Volt DC output socket. Equipped with built-in compressor with various adapter nipples. Includes adapter for charging the Jumpstarter. Heavy Duty 200 Amp Booster Clamps. Polyethylene housing.

HBM car start booster, jump starter battery booster, 230 v, 12 v, 18 ah

Kind Starthulp. |Tension 12 Volt. |Capacity 18 Ah. |Peak current 1200 AMPS. |Height 350 Mm. |Width 370 Mm. |Depth 140 Mm. |

HBM 15 Watts. Foldable Solar Panel With 10000MAH Battery

The HBM 15 Watt Foldable Solar Panel with 10000MAH Battery is a revolutionary solution for charging your devices. With a peak power of 5V 15W (PET+Solar power), a built-in Li-polymer 10000mAh battery, a solar conversion rate of 22%-25% and various output options, this device is a must-have for any outdoor adventurer. This HBM 15 Watt Foldable Solar Panel is equipped with: USB1 Output: 5V2A USB2 Output: 5V3A / 9V2A / 1 2V1 . 5A Type-c (PD bi-directional): 5V3A / 9V2A / 1 2V1 .5A Micro input: 5V3A / 9V2A / 1 2V1 .5A The device is very compact, with a folded surface of 27 x 16 x 2cm and an unfolded surface of 63 x 27 x 1cm. The weight is 588g. With the HBM 15 Watt Foldable Solar Panel with 10000MAH Battery you can enjoy optimal energy consumption wherever you are.

GYS Start cable 500 A.

(1)

GYS Starter Cable 500 A: powerful jumper cables for heavy machines or vehicles With the GYS Starter Cable 500 A, your machines and vehicles will be up and running again in no time. These powerful jumper cables are suitable for a capacity of up to 500 Ah and have a length of 3 meters and a diameter of 25 mm. The bronze clamps are sturdy and reliable and the cables are provided with handy storage bags. Most important features: - Suitable for 500 Ah power - Length of 3 meters and diameter of 25 mm - Bronze clamps for reliability - Handy storage bags With these jumper cables from Gys you can quickly and easily get your vehicles or machines running again. The cables are of high quality and easy to store in the supplied storage bags. Ideal for use in the workshop or on the go. Specifications: - Item number: 5193564015 - Bar code: 3154020564015 - Brand: GYS - Net weight (kg): 2.12 - Insulated: No - Type of accessories/parts: Other Order the GYS Starter Cable 500 A today and make sure you are always prepared for anything!

HBM 18 Volt 4.0AH Battery HBM 18 Volt 4.0AH Battery For HBM Battery Tools

HBM 18 Volt 4.0AH Battery For HBM Battery Tools. Fits article number: 10032 - 10031 - 10030 - 10029 - 9917 - 9384 - 9383 - 9382 and the 8952.

gys battery charger artic 800

With the compact fully automatic battery charger GYS Asrtic 800 from the Gys brand, you are always assured of a reliable and fast way of charging your battery. This smart charger is specially designed for charging 12 volt batteries from 1.6 Ah to 25 Ah, or for trickle charging up to 80 Ah. Ideal charger and maintenance charger The Gys Battery Charger ARTIC 800 is the ideal charger and also trickle charger / maintenance charger for various types of vehicles, such as motorcycle, moped, scooter, jet ski and lawn mower. This battery charger offers a suitable solution for every situation. Technical data Easy operation Protection class IP 44 Suitable for 12 volt batteries Suitable for batteries from 1.6 to 25 Ah Maintenance charging up to 80 Ah Suitable for all types of lead acid, SLA, AGM, and GEL Trickle charging / maintenance charging possible A quality With the Gys Battery Charger ARTIC 800 you are always assured of a safe and reliable way of charging your battery. Order today and benefit from the best quality and service from Gys.

GYS Start cable 500A, with insulated clamp, 3.5m

(1)

2 copper starter cables suitable up to 500 amps with a length of 3.5 meters and a diameter of 25 mm. Characteristics 500 amps Length 3.5 meters Diameter 25 mm Insulated clamps Specifications: Article number: 5193056336 Barcode: 3154020056336 Brand: GYS Net weight (kg): 1.72 Insulated: Yes Type of accessories / parts: Other Logo 2:

GYS Kit for MMA, 10/25

(1)

Description of Gys Laskabelset MMA 16mm² 2m Strong and for long-term use Professional accessories for your welding workshop or home Original Gys - Quality Specifications: Article number: 5193047372 Barcode: 3154020047372 Brand: GYS Net weight (kg): 1.66 Logo 2: Instruction manual:

gys nbt200 battery tester, alternator tester, battery guard 50 cm

Gys NBT200 is a battery tester suitable for two different types of blei-saure batteries. With the ability to measure maintenance-free batteries VRLA/GEL/AGM and standard flooded batteries, the dynamic resistance measurement minimizes battery discharge and gives an unbiased result that is unaffected by various factors such as surface charge, consumer power consumption or faulty contacts . Features of the Gys NBT200 Battery Tester Battery 12 Volt: measure the voltage and the state of charge Starter motor 12 Volt: measure the starting voltage Alternator 12Volt: measure the output voltage of the alternator Battery voltage (7 Volt to 15 Volt) Available opportunity flow The state of charge of the battery Digital screen Protected against polarity reversal ABS housing (acid resistant) No batteries required: works with battery power With its simple operation, this tester ensures fast and accurate test results. The device has a length of 50 cm and can be used both at home and in the workplace. Order the Gys NBT200 battery tester now and assure yourself of a high-quality battery tester that provides reliable measurement results.

HBM Professional Automatic Battery Charger 6-12 Volt, 2Ah - 120Ah

With this automatic battery charger you can charge your lead battery easily and according to the correct charging curve! Charging a lead-acid battery should ideally be carried out according to a certain charging curve, depending on the charge level of the battery. With the HBM Professional Automatic Battery Charger 6-12 Volt, 2Ah - 120Ah you don't have to take this into account, because it continuously measures the charge level of the lead battery and automatically adjusts the charging current and charging voltage accordingly, according to the characteristic charging curve of lead batteries. Suitable for lead batteries from 6 to 12 volts Charging capacity from 2Ah to 120Ah Microprocessor controlled Also charges at temperatures down to -5°C Display shows charging status and power supply Easy to operate with "Mode" button The HBM Professional Automatic Battery Charger 6-12 Volt, 2Ah - 120Ah is ideal for charging weak lead batteries in winter. During the charging process, the display shows how much current flows to the battery and what the status of the charging process is. With the “Mode” button you can choose between a 6 or 12 Volt battery. With this automatic battery charger you charge carefree in the most ideal way and the battery always receives the correct charge, which also depends on the health of the battery. Technical specifications of the HBM Professional Automatic Battery Charger 6-12 Volt, 2Ah - 120Ah: Input: 220-240V, 50-60Hz Output 6VDC 1A Output 12VDC 1A/4A With the HBM Professional Automatic Battery Charger 6-12 Volt, 2Ah - 120Ah you can easily and carefree charge your lead battery in the most ideal way!

HBM Professional Automatic Battery Charger 6-12 Volt, 2Ah - 60Ah

Charge your lead battery in the most ideal way with this automatic battery charger from HBM! This microprocessor-controlled battery charger continuously measures the charge level of the lead battery and adjusts the charging current and charging voltage accordingly. The charger takes into account the characteristic charging curve applicable to lead batteries, which ensures a correct charge that also depends on the health of the battery. This battery charger is also able to charge a lead battery in low temperatures down to -5°C. This makes this battery charger ideal for reviving a weak lead battery during the winter. Features of the HBM Professional Automatic Battery Charger 6-12 Volt, 2Ah - 60Ah: Automatic battery charger Microprocessor controlled Adjusts charge current and charge voltage based on battery charge level Takes into account the characteristic charging curve of lead batteries Suitable for low temperatures down to -5°C Charging 6 Volt and 12 Volt batteries Display shows charging current and status of the charging process With the 'Mode' button you can easily choose whether you want to use the battery charger for a 6 Volt battery or a 12 Volt battery. This way you can charge your lead battery carefree in the most ideal way. Specifications: Input: 220-240V Frequency: 50-60Hz Output 6VDC: 2A Output 12VDC: 2A

GYS Battery charger ENERGY 124, Traditional

(1)

Battery charger suitable for all lead-acid liquid batteries between 15 and 45 Ah. Automatically protected against overcharging and pool swapping. Copper winding. Charging indication by means of a voltmeter, the voltmeter also serves as a test meter. Integrated storage option for the cables. Special characteristics Suitable for all lead-acid liquid batteries Various protection aspects Copper coil Voltmeter Insulated clamps Specifications: Article number: 5192023215 Barcode: 3154020023215 Brand: GYS Net weight (kg): 1.9 Battery Property: Lead Acid Degree of protection (IP): IP20 Depth: 115 mm Trickle charger: No. Frequency: 50/60 Hz Height: 160 mm Housing material: Plastic Max. charging current: 4.5 A. Nom. input voltage 1: 230 V. Number of outgoing connections: 2 Power factor: 70 Recommended battery capacity: 15 - 45 Ah Short circuit protection: Yes Suitable for industrial batteries: 235; le batteries: 39; s: Yes Suitable for starter batteries: 39; s: Yes Width: 220 mm Logo 2: Presentation document / presentation file: Instruction manual:

Scheppach Battery 4.0 Ah BA4.0-20ProS

Optimally equipped with the powerful batteries of the 20 V Pro Series from Scheppach. The right battery for every project, perfectly tuned and compatible with all devices of our 20 V Pro Series. - Fast rechargeable - Li-Ion batteries with LED display - No memory effect Specifications: Article number: 7909205703 Barcode: 4046664076315 Brand: SCHEPPACH Net weight (kg): 0.2 Capacity: 4 Ah Version: Lithium ions Nom. voltage: 20 V. Weight: 0.4 g Logo 2: Parts list / exploded view:

GYS OBD memory saver

(1)

GYS OBD memory saver Specifications: Article number: 5193054998 Barcode: 3154020054998 Brand: GYS Net weight (kg): 0.12 Logo 2: Presentation document / presentation file: Instruction manual:

HBM Battery Charger for the HBM 18 Volt 4.0AH Battery

HBM Battery Charger For HBM 18 Volt 4.0AH Battery For HBM Battery Tools. Suitable for article number: 10032 - 10031 - 10030 - 10029 - 9917 - 9384 - 9383 - 9382 - 8952 - 9845.

GYS Battery Charger TCB 120 Automatic

(1)

For a reliable and efficient way to charge your batteries, choose the GYS Battery Charger TCB 120 Automatic. This device is designed for unattended charging and is suitable for batteries with a capacity of 30 to 120 Ah. With a choice of 2 charging speeds (3.5A / 7A) you can adjust the charge to your needs. The charging status is indicated by 3 lights, so that you are always aware of the status of your battery. In addition, the battery charger is equipped with various protection mechanisms, including protection against overload and short circuit. An audible signal is also given if the poles are incorrectly connected. With insulated terminals and a degree of protection of IP20, this device is not only safe to use, but also durable and reliable. The article number of this battery charger is 5192023284 and the barcode is 3154020023284. The brand is GYS and the net weight is 3.22 kg. Below you will find the specifications of the GYS Battery Charger TCB 120 Automatic: - Depth: 120 mm - Trickle charger: No - Frequency: 50/60 Hz - Height: 290 mm - Housing material: Plastic - Max. charging current: 10.5 A - Nom. input voltage 1: 230 V - Number of output connections: 2 - Power factor: 150 - Recommended battery capacity: 20 - 120 Ah - Short-circuit protection: Yes - Suitable for industrial batteries: Yes - Suitable for starter batteries: Yes - Width: 170 mm With the GYS Battery Charger TCB 120 Automatic you are assured of a fully charged battery without the risk of overload or other damage to your vehicle. Order today and take advantage of our fast delivery and competitive prices.

GYS Battery charger ARTIC 1500

(1)

Battery charger ARTIC 1500 from Gys. Special characteristics Specially designed for charging 12V batteries of motorcycles, jet skis, go-karts and lawn mowers Specifications: Article number: 5192029576 Barcode: 3154020029576 Brand: GYS Net weight (kg): 0.5 Degree of protection (IP): IP65 Depth: 150 mm Trickle charger: No. Frequency: 50/60 Hz Height: 55 mm Housing material: Other Max. charging current: 1.5 A. Nom. input voltage 1: 240 V. Number of outgoing connections: 1 Power factor: 27 Recommended battery capacity: 3 - 40 Ah Short circuit protection: Yes Suitable for industrial batteries: 235; le batteries: 39; s: Yes Suitable for starter batteries: 39; s: Yes Width: 206 mm Logo 2: Presentation document / presentation file: Instruction manual:

Scangrip SPS Battery 12V Li-Ion 8Ah

(1)

Special characteristics SPS battery Unit 8Ah from Scangrip. Exchangeable battery for the NOVA SPS 6 (03.6001) NOVA SPS 10 (03.6002) and Area 10 SPS (03.6009). Specifications Type: 11.1V / 8000 mAh Li-ion Net weight: 560 gr Dimensions width: 75 mm Dimensions height: 62 mm Dimensions length: 103 mm Protection: IP67 Specifications: Article number: 03.6004 Barcode: 5708997360040 Brand: SCANGRIP Net weight (kg): 0.6 Colour black Height: 62 mm Length: 103 mm Type of accessories / parts: Battery Width: 75 mm Logo 1: Logo 2: Instruction manual:

GYS GYSflash 4.12

(1)

The GYSFLASH 4.12, specially designed for charging 12V batteries of smaller cars, motorcycles, jet skis, go-karts and clippers, features an intelligent charging curve in 7 steps that guarantees an optimal charging procedure, and which is 2 times faster than a traditional 4A charger . Special characteristics Designed for charging 12V batteries (lead acid) from 1.2 to 70 Ah, but also suitable for trickle charging up to 130 Ah. With special winter / AGM battery function: - Special charging mode in severe cold (temperatures below 5 ° C) - Optimal charging of Start & Stop batteries (AGM). Charging and maintenance in 7 steps and without supervision optimize the life and performance of your battery. Recovers deeply discharged batteries> 2V (SOS Recovery) The system is protected against short circuit, polarity reversal and overcharging, and thus contributes to the preservation of your on-board electronics. Anti-spark system. Automatically switches to standby when the battery is disconnected Integrated temperature sensor, protects your vehicle against overheating of the internal electronics. Simple operation, prevents wrong actions Compact design, light and easy to carry. Fast and watertight connection. Completely waterproof and dust-free (IP65). Wall brackets (optional). View the datasheet here View the manual Specifications here: Article number: 5192029422 Barcode: 3154020029422 Brand: GYS Net weight (kg): 0.892 Degree of protection (IP): IP65 Depth: 195 mm Trickle charger: No. Frequency: 50/60 Hz Height: 70 mm Housing material: Other Max. charging current: 4 A. Nom. input voltage 1: 240 V. Number of outgoing connections: 1 Power factor: 70 Recommended battery capacity: 1.2 - 130 Ah Short circuit protection: Yes Suitable for industrial batteries: 235; le batteries: 39; s: Yes Suitable for starter batteries: 39; s: Yes Width: 365 mm Logo 2: Presentation document / presentation file: Instruction manual:

GYS Starter cable 320A, 3m, 16mm

2 bronze jumper cables suitable for up to 320 amps with a length of 3 meters and a diameter of 16 mm. Characteristics 320 amps Length 3 meters Diameter 16 mm Insulated terminals Specifications: Item number: 5193056206 Barcode: 3154020056206 Brand: GYS Net weight (kg): 1.65 Isolated: No Accessory/part type: Other Logo 1:

Winntec jump starter including compressor

Specifications: Starting current: 2000A Peak current: 1000A Compressor: Pressure 10 to 150 PSI Power Bank: Battery capacity 55.5 Wh LED lighting: Lumen: 300 Charging time: About 1 hour (with USB-C 60W adapter) Included as standard: Winntec JTM200010 mobile battery booster with compressor Sturdy battery clamps Pump hose Different pump valves Charging cable Storage bag for accessories

GYS Battery charger Wattmatic 100 6V / 12V, Automatic

Charge your batteries automatically and unattended with the Wattmatic, the perfect charger to charge your batteries to 100%. Disconnection is no longer necessary, because current will only flow once the poles are properly connected, which also prevents sparking. In addition, there is a protection that warns you if the poles are connected incorrectly. Special characteristics: - Automatic loading - 100% charging for lead-acid gel and liquid batteries - Protection for on-board electronics - 2 loading speeds - Storage space for cables and clamps View the datasheet and manual here for more information. Specifications: - Item number: 5192024823 - Bar code: 3154020024823 - Brand: GYS - Net weight (kg): 3.7 - Battery property: Lead-acid - Depth: 120mm - Trickle charger: Yes - Frequency: 50/60 Hz - Height: 230mm - Housing material: Steel - Max. charging current: 9.5A - Nom. input voltage 1: 230V - Number of outgoing connections: 2 - Power factor: 140 - Short-circuit protection: Yes - Suitable for industrial batteries: Yes - Suitable for starter batteries: Yes - Width: 260mm Upgrade your charging experience with the GYS Battery Charger Wattmatic 100 6V / 12V, Automatic, and keep your batteries charged and ready for use at all times.

GYS Battery charger Start Up 80, Automatic

The GYS Battery Charger Start Up 80, Automatic is a 3-in-1 battery helper from the brand GYS. This battery charger can be used as a starting aid for passenger cars, campers and vans. It is also possible to use the charger as a fully automatic battery charger, without having to stay there. The charging status is displayed with 3 LED lights, while the on-board electronics are protected. In the test function you can quickly see the condition of your battery. The battery and the device are protected in different ways. Special characteristics: 3 in 1 battery helper starting aid Battery charger Battery tester Protection against short circuit, overload and more Specifications: Item number: 5192024922 Bar code: 3154020024922 Brand: GYS Net weight (kg): 4.29 Degree of protection (IP): IP20 Depth: 120mm Trickle Charger: No Frequency: 50/60 Hz Height: 320mm Housing material: Plastic max. charging current: 17 A Nom. input voltage 1: 230 V Number of outgoing connections: 2 Power factor: 350 Short-circuit protection: Yes Suitable for industrial batteries: Yes Suitable for starter batteries: Yes Width: 180mm

Scangrip SPS Charger 85W

The Scangrip SPS Charger 85W is an indispensable accessory for anyone working in industry, construction or any other place where good light is of great importance. This charger provides an uninterrupted light supply thanks to the rechargeable battery system. You can also choose to charge the replaceable battery or connect the charger directly to the lamp. This way you never have to be without light and you can continue working optimally in all circumstances. The technical data of the Scangrip SPS Charger 85W is also impressive. The connection voltage is 12.6 V and the safety type is IP67. This means that the charger is fully protected against dust and water. That way you can also use this charger outdoors without any problems. You also get the Scangrip SPS Charger 85W with a number of handy accessories. One charger is included as standard, so you can get started right away. The weight of the charger is only 0.76 kg, which makes it easy to move. Conclusion: The Scangrip SPS Charger 85W from the well-known brand Scangrip ensures an uninterrupted light supply thanks to the rechargeable battery system. In addition, this charger is also very safe thanks to the IP67 safety type. You can get started right away with the charger supplied as standard. This makes this charger a real must-have for anyone who opts for quality and reliability. Order it today!

GYS Converter Convergys 300W

(1)

The Convergys 300 W inverter converts the energy from your 12V battery into the electrical 230V power supply to power or charge all devices up to 300W. It gets the energy via the cigarette lighter connection or via its battery clamps. In addition to a 230V connection, you can connect various devices such as MP3 player or camera via a USB port (5V). View the datasheet here View the manual Specifications here: Article number: 5192027053 Barcode: 3154020027053 Brand: GYS Net weight (kg): 0.95 Continuous inverter power: 300 W. Degree of protection (IP): IP20 Depth: 150 mm Height: 60 mm Housing material: Steel Max. charging current: 0.5 A. Nom. charger input voltage: 12 V. Nom. inverter output voltage: 230 V. Nom. voltage DC converter: 12 V Overload / overtemperature protection: Yes Earth leakage circuit breaker: Yes Short circuit protection: Yes Width: 100 mm Logo 2: Presentation document / presentation file: Instruction manual: