Chucks Products

HBM ck 4 - 4 s wood chuck for wood lathe

(2)

Diameter 100 mm. |Recording M33 / 1"x8 / 3/4"x16. |

HBM myford flange

(1)

Diameter 100 of 125 mm. |Recording 1.1/8" x 12 TPI. |

HBM 95 mm Professional Lathe Chuck For Wood Lathe Complete Set

Diameter of the chuck 95 mm. |

HBM adapters for wood chucks

All our products have a warranty of at least 1 year.

HBM 3 chucks

Diameter 80 mm. |Height of the chuck including jaw 66,5 mm. |Recording Voor en Achtermontage. |Maximum speed 4000 O/min. |Diameter 100 mm. |Height of the chuck including jaw 74,5 mm. |Maximum speed 3000 O/min. |Diameter 125 mm. |Height of the chuck including jaw 84,5 mm. |Diameter 160 mm. |Height of the chuck including jaw 109 mm. |Maximum speed 2500 O/min. |Diameter 315 mm. |Height of the chuck including jaw 156.5 mm. |Maximum speed 1200 O/min. |

HBM ck 4 - 4 n wood chuck for wood lathe

Diameter 100 mm. |Recording M33 / 1"x8 / 3/4"x16. |

HBM self-centering 4 chucks

Diameter 100 mm. |Height of the chuck including jaw 74,5 mm. |Recording Voor en Achtermontage. |Maximum speed 3000 O/min. |Diameter 125 mm. |Height of the chuck including jaw 84,5 mm. |Diameter 160 mm. |Height of the chuck including jaw 109 mm. |Maximum speed 2500 O/min. |Diameter 315 mm. |Height of the chuck including jaw 156.5 mm. |Maximum speed 1200 O/min. |

HBM Aluminum Top Jaws with Rubber for Extra Grip For in the bench vice

HBM Aluminum magnetic top jaws with Rubber clamping surface for in the vice. These aluminum magnetic top jaws are provided with rubber clamping surfaces in which grooves have been made. These grooves not only provide more grip, but also the possibility to clamp round or polygonal objects. The magnets are milled into the rear of these jaws and consist of iron oxide magnetic strips (iron oxide powder mixed with rubber). . These magnetic strips have the advantage that they are not brittle or fragile (unlike rare-earth or neodymium magnets). As a result, these magnets can never lose small splinters, which can then end up between your machine clamp (or vice) and the top jaw, causing them to no longer connect properly. The magnetic force of these iron oxide rubber strip magnets , is also such that the top jaws are properly pulled towards the clamp (or vice) without magnetizing your workpiece. These magnetic top jaws are available in the following widths: 100 mm - Item no. 9890. 125 mm - Item no. 9891. 150 mm - Item no. 9892.

HBM ck 3.5 - 4 k wood chuck for wood lathe

Diameter 90 mm. |Recording M33 / 1"x8 / 3/4"x16. |

HBM Aluminum Flange for 100 and 125 mm Chuck DIN 6350

Looking for a strong and reliable clamping plate for your 100 or 125 mm chuck? Then this HBM Aluminum Flange for Chuck DIN 6350 is perfect for you! This clamping plate can easily be mounted on one of the four matching article numbers and is very suitable for firmly clamping workpieces. Most important features Suitable for item numbers 4672, 3509, 1456 and 5061 Can carry 100 and 125 mm chucks Made of durable aluminum In accordance with DIN 6350 Whether you are a professional handyman or just want to do some tinkering in the workshop, this HBM Aluminum Flange for Chuck DIN 6350 offers the stability and reliability you need to make your projects a success. Order now and benefit from our fast and reliable delivery!

HBM hv-6 - 160 mm. professional distribution table with 160 mm. 3 chuck

Diameter of the chuck 160 mm. |Height of the distribution table 70 mm. |Total height vertical 200 mm. |Height of the distribution table including chuck 152,5 cm. ( Bovenkant klauwplaat ) |Height of the distribution table including chuck 180 mm. ( Bovenkant bekken ) |T - Slots 10 mm. |Number of slots 3. |Recording MC 2. |Transmission 1:90 |Maximum load horizontally 40 Kg. |Maximum load vertical 20 Kg. |

HBM independent 4 chucks

Diameter 80 mm. |Let through 25 mm. |Height of the chuck including jaw 77 mm. |Recording Achtermontage. |Diameter 100 mm. |Diameter 125 mm. |Let through 30 mm. |Height of the chuck including jaw 78 mm. |Diameter 200 mm. |Let through 50 mm. |Height of the chuck including jaw 110 mm. |Recording Voor en Achtermontage. |

HBM soft jaw chucks

These soft jaws only fit on the new HBM DIN 6350 chucks. They do not fit on the jaw plates that are fitted as standard on our machines.

HBM universal chuck wrenches with safety spring

These claw location keys meet the latest CE standard. Equipped with safety spring.

HBM ck 6 - 4 h wood chuck for wood lathe

(1)

Diameter 150 mm. |Recording M33 / 1"x8 / 3/4"x16. |

HBM independent 4 chucks for metal lathes

All our products have a warranty of at least 1 year.

HBM CK 5 - 4 H Wood Chuck for Wood Lathe

The HBM CK5-4H Wood Chuck for Wood Lathe from the HBM brand is a high-quality product. This chuck has a diameter of 125 mm and a reception of M33 / 1"x8 / 3/4"x16. The standard delivery includes: 4 sets of top jaws 1 set of clamping plates with pins Beautiful wooden storage box The HBM CK5-4H Wood Chuck for Wood Lathe is a reliable and durable solution for turning wood. With this lathe chuck you have a solid product that simplifies your work on the wood lathe and increases your productivity.

HBM ck 2 - 4 s wood chuck for wood lathe

(1)

Diameter 50 mm. |Recording M33 / 1"x8 / 3/4"x16. |

HBM 200 mm. professional dividing table with 200 mm 3 chuck

Diameter of the chuck 200 mm. |Height of the distribution table 105 mm. |Total height vertical 265 mm. |Height of the distribution table including chuck 180 mm. ( Bovenkant klauwplaat ) |Height of the distribution table including chuck 215 mm. ( Bovenkant bekken ) |T - Slots 12 mm. |Number of slots 3. |Recording MC 3. |Transmission 1:90 |Maximum load horizontally 80 Kg. |Maximum load vertical 40 Kg. |

HBM bs-0 distribution device set with 125 mm. 3 chuck

Height 173 mm. |Let through 18 mm. |Center height 100 mm. |