Workshop presses and window presses Products

HBM Folding Bench Attachment For Workshop Press 305 x 5 mm.

With the HBM Bender Attachment For Workshop Press 305 x 5 mm you can bend metal plates in an easy and accurate way. This high quality attachment has been specially designed for use with a workshop press and has a maximum bending range of 305mm and a maximum bending thickness of 5mm. Characteristics: Suitable for use with a workshop press Maximum bending width of 305 mm Maximum bend thickness of 5 mm for aluminum and 6.4 mm for stainless steel High quality construction for long life Easy and accurate to use Weighs only 10 kg Technical data: Maximum bending width: 305 mm Maximum bending thickness aluminum: 10 mm Maximum bending thickness of stainless steel: 6.4 mm Weight: 10 kg Packaging dimensions: L 42 x W 24 x H 11 cm The HBM Bender Attachment For Workshop Press 305 x 5 mm is an indispensable tool for anyone who regularly bends metal plates. The attachment is easy and accurate to use and has a high-quality construction for a long service life. With a maximum bending width of 305 mm and a maximum bending thickness of 5 mm for aluminum and 6.4 mm for stainless steel, you can bend a wide variety of plates with this attachment. Order today and benefit from our fast delivery and excellent service. The HBM Bench Attachment For Workshop Press 305 x 5 mm comes with all necessary parts and has a weight of only 10 kg, so you can easily move and store it. This high-quality attachment allows you to bend sheet metal quickly and accurately, allowing you to work more efficiently and achieve better results.

HBM universally adjustable press block for workshop press

(1)

Maximum load 30 Ton. |

HBM set of press pins for frame press

Length 110 mm. |Diameter 10 mm. |Capacity 18 Ton. |Length 50 mm. |Diameter 30 mm. |Capacity 2 Ton. |Capacity 20 Ton. |Diameter 12 mm. |Length 60 mm. |Capacity 3 Ton. |Diameter 16 mm. |Capacity 8 Ton. |Diameter 18 mm. |Length 85 mm. |Capacity 12 Ton. |Diameter 20 mm. |Capacity 14 Ton. |Diameter 22 mm. |Capacity 16 Ton. |Diameter 25 mm. |

HBM hydraulic and pneumatic foot pump

The HBM Hydraulic and Pneumatic Foot Pump is a robust unit for operating motorcycle lift tables. This jack comes with ergonomic foot pedals, pneumatic controls and mounting holes and plate. The compressed air pressure of the compressor must be between 5 and 7 bar. The oil reservoir has a capacity of 750 ML and the pump generates a pressure of approx. 55 Mpa. The reservoir volume of the pump is one litre. Robust hydraulic and pneumatic unit for operating motorcycle lifting tables Includes ergonomic foot pedals and pneumatic controls Includes mounting holes and plate Compressor compressed air pressure: 5-7 bar Oil reservoir capacity: 750 ML Pressure: about 55 Mpa Reservoir volume: 1 litre With the HBM Hydraulic and Pneumatic Foot Pump you can operate your motorcycle lifting table easily and quickly. This robust unit has a compressed air pressure between 5 and 7 bar and has an oil reservoir with a capacity of 750 ML. With a pressure of approx. 55 Mpa you can easily pump up your motorcycle lifting table. The reservoir volume of the pump is one litre. The foot pedals and pneumatic controls make working with this jack ergonomic and comfortable.

HBM 75 Ton Hydraulic and Pneumatic Frame Press / Workshop Press

The HBM 75 Ton Hydraulic and Pneumatic Window Press / Workshop Press is officially CE certified according to the latest rules. Our presses meet the latest safety standards, including aluminum safety decals, extra reinforcement bars and safety clips on the height adjustment locking pins. The press blocks are provided with welded edges and can therefore not slip away during pressing. Furthermore, the winch and pulleys are completely closed. In addition, the CE certificate is included. Technical data of the HBM 75 Ton Hydraulic and Pneumatic Frame Press / Workshop Press: Capacity: 75 Tons. Working pressure: 7.5 to 8.5 Bar. Stroke of the cylinder: 250 mm. Working range: From 170 to 885 mm. Width of the bed: 800 mm. Packing dimensions: 110 x 32 x 211 cm. Weight: 425 Kg. The HBM 75 Ton Hydraulic and Pneumatic Frame Press / Workshop Press is supplied as standard including: 2 Press blocks. pressure gauge. Radially movable cylinder. Completely enclosed winch. Hydraulic hand control with a short and long stroke. Pneumatic operation. Pneumatic foot pedal. Safety stickers. Closed pulleys. CE certificate.

Weber workshop press 50 Ton

Weber workshop press 50 Ton Specifications Capacity: 50 Tons Stroke of the cylinder: 22.5 cm Working range: 5.5 - 106.5 cm Net working width within the frame: 73 cm Column depth: 23 cm Dimensions (LxWxH): 127 x 88 x 191.5 cm Weight: 298 kg Packaging dimensions (LxWxH): 207 x 96 x 32 cm The Weber workshop press with a capacity of 50 tons is a robust press that is perfect for use in the workshop. Thanks to its enormous capacity, this press can exert great forces, which is essential for bending, pressing or shaping material. With a stroke of 22.5 cm, this workshop press is suitable for many different applications. The working area varies from 5.5 cm to 106.5 cm, so that many different sizes of workpieces fit in this press. The net working width within the frame of the press is 73 cm, and the column depth is 23 cm. This ensures a sturdy construction and stable operation. The dimensions of the press are 127 cm in length, 88 cm in width and 191.5 cm in height. With a weight of 298 kg, this press is sturdy and durable. The packing dimensions of this press are 207 cm in length, 96 cm in width and 32 cm in height. This ensures that the press is delivered safely and protected. In short, the Weber workshop press 50 Ton is a reliable and powerful press that is suitable for many applications in the workshop. Order today and benefit from the excellent performance of this press!

HBM professional workshop press 20 tons

With the HBM professional workshop press 20 tons you are assured of a powerful and reliable addition to your workshop. This press has a capacity of 20 tons and a stroke of 185 mm, so you can easily complete even the toughest jobs. Operation: Manual/Pneumatic Air pressure: 0.75-0.85 MPA Total product dimensions: 738 x 700 x 1787 mm Package size: 156 x 30 x 28 cm Net weight: 108.8 kg The HBM professional workshop press is not only powerful, but also user-friendly. With the manual or pneumatic operation you can work easily and accurately. The compact dimensions ensure that the press does not take up too much space in your workshop.

HBM Workshop Press 50 Ton

The HBM Workshop Press 50 Ton is an essential tool for any workshop. With a capacity of 50 tons and a stroke of 200 mm, this workshop press is perfect for bending, pressing and forming metal parts. Thanks to the manual operation, you can apply just the right amount of pressure to the workpiece. The air pressure of 0.75-0.85 MPA ensures reliable and consistent operation of the press. The overall product dimensions of 103.6 x 80 x 183.1 cm make it easy to place the press in any workshop. The net weight of 300 kg ensures stability during use. The HBM Workshop Press 50 ton comes in a sturdy package with dimensions of 211 x 97.5 x 31.5 cm, so that it arrives safely. Invest in this high-quality product today and complete your workshop! Capacity: 50 tons Stroke: 200 mm Air pressure: 0.75-0.85 MPA Total product dimensions: 103.6 x 80 x 183.1 cm Package size: 211 x 97.5 x 31.5 cm Net weight: 300 kg

HBM Workshop Press 12 Ton

The HBM Workshop Press 12 ton is a powerful and reliable tool for your workshop. With a capacity of 12 tons and a stroke of 775 mm, you can press and form heavy parts easily and accurately. The total product dimensions of 720 x 495 x 1655 mm ensure a stable and sturdy construction. The manual control gives you full control over the pressure and allows you to adjust the press to your specific needs. The net weight of 65.5 kg makes it easy to move and store the press when needed. With the HBM Workshop Press 12 tons you can work efficiently and safely and ensure that all your projects are executed to perfection. Order today and experience the convenience of this high-quality workshop press! Operation: Manual Capacity: 12 tons Stroke: 775 mm Total product dimensions: 720 x 495 x 1655 mm Package size: 142 x 30 x 26 cm Net weight: 65.5 kg

HBM Workshop Press 10 Ton

The HBM Workshop Press 10 ton is a powerful and reliable machine for your workshop. With a capacity of 10 tons and a stroke of 175 mm, you can effortlessly press and shape heavy objects. The total product dimensions of 640 x 495 x 1060 mm ensure a stable and firm base during use. Operation: Manual Capacity: 10 tons Stroke: 175 mm Total product dimensions: 640 x 495 x 1060 mm Package size: 76 x 53 x 14.5 cm Net weight: 44.2 kg The HBM Workshop Press 10 ton is compact in size and easy to move thanks to its net weight of 44.2 kg. This press is ideal for bending, pressing and shaping various materials. Add this powerful machine to your workshop and improve your productivity and efficiency!

HBM Workshop Press 40 Ton

With the HBM Workshop Press 40 tons you are assured of powerful performance and durability. This manual workshop press has an impressive capacity of 40 tons and a stroke of 180 mm, allowing you to handle even the toughest jobs effortlessly. The air pressure of 0.75-0.85 MPA ensures efficient operation. The total product dimensions of the HBM Workshop Press are 93.8 x 80 x 190.7 cm and the packaging size is 87.5 x 38 x 210 cm. With a net weight of 235 kg, this press is robust and stable, allowing you to work safely. Invest in quality and reliability with the HBM Workshop Press 40 ton. Manual operation Capacity of 40 tons Stroke of 180 mm Air pressure of 0.75-0.85 MPA Robust and stable construction

HBM Workshop Press Safety Screen/Grid

This HBM Workshop Press Safety Screen/Grid ensures optimum safety when using your workshop press. With a product size of 52 x 51.5 cm, this safety screen fits perfectly on your workshop press, protecting your hands during use. The net weight of only 3.25 kg makes it easy to install and move if necessary. The packaging size of 55 x 57 x 11 cm ensures that the safety screen is well protected during transport. With this safety screen, you can get started in your workshop with peace of mind! Optimal safety during use Fits perfectly on your workshop press Lightweight and easy to install Well protected during transport

HBM workshop press 75 tons

The HBM workshop press 75 tons is a powerful and robust tool that is specially designed for heavy work in professional workshops. With an impressive pressing force of 75 tons, this hydraulic press is ideal for pressing, bending, or pressing out various materials. Whether you're installing or removing bearings, shafts, or other parts, this workshop press gives you the precision and power you need to get the job done quickly and efficiently. Thanks to its solid steel frame and precise hydraulic operation, this press is a reliable addition to any garage or workshop. Powerful pressing force of 75 tons Ideal for pressing, bending or pressing out materials Precision and power for assembling or disassembling parts Solid steel frame for durability Precise hydraulic action for efficiency

HBM Workshop Press 20 Ton

The HBM Workshop Press 20 Ton is an essential tool for both hobbyists and professionals looking for a reliable press for their workshop. With its powerful 20 ton capacity, you can effortlessly form metal, press materials together and perform assemblies. Robust construction User-friendly design Efficient and accurate Suitable for various applications, from bending metal sheets to pressing bearings Compact dimensions, ideal for workshops with limited space The HBM Workshop Press 20 ton is the perfect choice for all your press work. Don't miss this opportunity to equip your workshop with this powerful and versatile press!

Hydraulic pneumatic press 75T MW Tools

Discover the power and versatility of the 75T MW Tools Hydraulic Pneumatic Press – the professional solution for precision work in any workshop. With its impressive power and smart design, this press increases your efficiency and safety, while making operation easier and more convenient than ever. Ease of use: The press can be operated with a convenient pneumatic foot pedal for fast and powerful work, but can also be operated manually with a lever for maximum control and precision. Flexibility for every job: Thanks to the side-moving cylinder, you can reach every edge of your workpiece, even with large objects. The work table is easily height-adjustable with a hand winch and is securely supported by sturdy pins with safety clips. Dual Speeds: The reliable pump mechanism operates at two speeds for smooth positioning and controlled pressing, and automatically adjusts to increased back pressure. Robust construction: The fully welded frame without bolts or screws guarantees a long service life, maximum stability and safety. Smart extras: Supplied with a set of V-blocks for precise straightening or pressing of shafts, tubes and bars Removable cylinder head (25 mm inner diameter) for various attachments and optional punches Pressure gauge with clear reading of the pressing force Pre-filled with hydraulic oil and easy to assemble: just attach the support legs yourself Compressed air controlled via movable EURO connector and foot pedal Key specifications at a glance: Maximum pressing force: 75 tons Vertical cylinder stroke: 250 mm Horizontal cylinder displacement: 260 mm Distance cylinder head to work table: 170 - 884 mm Work table height: 411 - 1125 mm above the floor Bed width / space between legs: 800 mm Compressed air: 7.5 - 8.5 bar, air flow 300 l/min CE certified, meets all current safety standards Whether you need to straighten shafts, press bearings, bend tubes, or perform punching operations, this press always delivers top performance. Expand your press with optional punches, pusher tools, and compressors for even more possibilities. Supplied with: Pneumatic foot pedal Set of V blocks (295 x 130 x 140 mm) Pressure gauge Hydraulic oil (pre-filled) Easy installation, only 2 support legs to be placed Optional accessories: Round punch set from 10 to 30 mm (incl. adapter) Hydraulic oil (4300 ml, can be ordered separately) Push pins and guide bushings for keyways

Hydraulic press 10 Ton manual operation MW Tools

Experience precision and power with the MW Tools 10-Ton Manual Hydraulic Press. This compact benchtop model is indispensable in any workshop and ideal for a variety of pressing and straightening tasks. Thanks to its manual operation, you have maximum control when machining bushings, bearings, shafts, and more. Discover all the benefits and specifications below! Powerful capacity: With a pressure capacity of 10 tons, you can handle heavy tasks with ease. Compact design: The table model takes up little space, but offers maximum performance. Manual precision: The lever ensures slow, precise operation for sensitive work. Mobile cylinder: The cylinder is movable laterally for extra flexibility and easy positioning. Durable Construction: One-piece welded frame ensures strength, stability and long life. Safe and fast: Equipped with an overload valve and a quick-mount work table with locking pins. Complete delivery: Including set of V-blocks (170x20mm, height 100mm), clear pressure gauge and 600 ml hydraulic oil. Easy to use: Delivered almost fully assembled; only the side legs need to be installed. Compatibility: Features a removable cylinder head (25mm inner diameter) for optional punch set and accessories. Important technical details: Cylinder vertical travel: 175 mm Cylinder horizontal stroke: 190 mm Cylinder diameter: 48 mm Work table distance to cylinder head: 110 – 364 mm Work table distance to floor: 175 – 430 mm Bed width / space between legs: 340 mm Suitable for professional use: the MW Tools 10-ton hydraulic press offers quality, precision, and reliability. Ideal for straightening, pressing, and machining materials such as shafts, tubes, and bearings, both in metalworking and maintenance workshops. Optionally expandable with a set of 8 round punches (10–30 mm), perfect for machining bushings, seals and roller bearings. Immediately available: Complete your workshop with this versatile hydraulic table press!

Hydraulic pneumatic press 20T mobile cylinder MW Tools

Discover the power and versatility of the MW Tools 20T Hydraulic Pneumatic Press with Mobile Cylinder . This robust workshop press is designed for intensive use and offers maximum flexibility thanks to its side-moving cylinder. Ideal for garages, workshops, and anyone who wants to perform powerful and precise pressing operations, both manually and with compressed air. Advanced controls: Work quickly and effortlessly with the pneumatic foot pedal or choose precise manual operation with the lever. Mobile cylinder: Press close to the edges of large workpieces thanks to the laterally movable cylinder – ideal for side pressing. Double Speed: The reliable two-speed pump mechanism ensures efficient operation; high speed when approaching, slow and powerful during pressing. Fully welded frame: Extra stability and a longer lifespan due to the solid, seamlessly welded base frame. Ease of use: The work table is easily adjustable in height and is supported by heavy-duty locking pins with safety clips. Safety first: Equipped with an overload valve and optionally expandable with a protective grille. Comprehensive delivery: You'll receive two sturdy V-blocks, a pressure gauge with press force indicator, and the press is pre-filled with hydraulic oil for immediate start. Flexibility and expandability: The removable cylinder head (25 mm inner diameter) is suitable for various accessories such as punch sets and press molds. Key Specifications: Press capacity: 20 Ton Cylinder vertical stroke: 185 mm Cylinder horizontal displacement: 176 mm Distance cylinder head to work table: 38 - 918 mm Distance work table to floor: 273 - 1153 mm Bed width/space between legs: 510 mm Compressed air working pressure: 7.5 – 8.5 bar, air flow rate: 200 l/min Expandable with: Set of 8 round punches (10-30 mm) including adapter Steel protective grille for extra safety Various sizes of hydraulic oil and guide bushings – the right accessory for every project Suitable silent or powerful compressors available Why choose this hydraulic pneumatic press? Combine power with precision, work more efficiently and safely on a wide range of pressing jobs – from axles and bushings to bearings and frame components. Fast delivery, easy installation, and extremely robust construction for years of reliable use.

Hydraulic table press 15 Ton manual operation MW Tools

The MW Tools 15-Ton Manual Hydraulic Bench Press is the perfect choice for those looking for power, precision, and flexibility in a compact benchtop model. This robust press is indispensable in any workshop for safely and efficiently pressing, straightening, or assembling bushings, bearings, shafts, and more. Thanks to its manual operation and sophisticated design, it delivers control and reliability on every project. Powerful & precise: 15 tons of pressing force for even the toughest tasks Manual lever control for maximum precision Double speed pump: fast and controlled operation Mobile cylinder easy to move sideways; ideal for large or irregular workpieces Sturdy & safe design: Fully welded one-piece frame for years of intensive use Height-adjustable work table with heavy-duty locking pins and safety clips Pump equipped with overload valve Pressure gauge for direct display of the pressing force Flexibility & expansion options: Removable cylinder head (25 mm inner diameter) – easily expandable with optional punch set or press dies Comes standard with 2 heavy duty V-blocks for axles, bars and tubes Large working space between the legs (500 mm) and wide table height adjustment (157 to 457 mm) Ready to use immediately: Supplied with V-blocks, pressure gauge and pre-filled with hydraulic oil Easy to assemble: only 2 support legs need to be assembled on site Optional accessories: 8-piece punch set for holes from 10 to 30 mm Extensive range of push rods and guide bushings Suitable for various press shapes and folding knives Thanks to the thoughtful design and reliable performance of the MW Tools 15-Ton Hydraulic Bench Press, you'll be getting a versatile powerhouse that will provide years of reliable service. Suitable for both professional and demanding DIY applications!

Hydraulic press 30T hand and foot control MW Tools

The MW Tools 30T Hydraulic Press combines power, precision, and ease of use in one robust machine. Thanks to both hand and foot controls, this press is ideal for demanding applications in workshops, garages, and industrial settings. With a 30-ton capacity and a mobile cylinder, this press offers maximum flexibility for straightening, pressing, or punching out workpieces of all sizes. Versatile operation: Manual with lever for precise control during sensitive work. Foot pedal for full freedom of movement and greater comfort during intensive tasks. Mobile cylinder: Can be moved laterally, ideal for working on larger workpieces that cannot be easily positioned. Robust construction: The fully welded base frame ensures maximum stability and durability even under full load. Dual Speed Pump: Delivers fast, powerful performance while maintaining effortless precision adjustment. User-friendly work table: Adjustable in height thanks to 4 heavy-duty locking pins with safety clips, which makes adjustment quick and safe. Ready to use: Supplied with a set of V-blocks, pre-filled hydraulic oil and a clear pressure gauge for an immediate display of the pressing force. Widely applicable: Suitable for pressing and straightening shafts, tubes and bars, replacing bearings and bushings, and with optional punching set also for punching holes in various diameters. Flexible expansion options: Compatible with various accessories such as punch sets and push tools for a wide range of applications. Technical specifications: Capacity: 30 tons Cylinder vertical travel: 150 mm Cylinder horizontal stroke: 200 mm (mobile) Worktable – cylinder head distance: 151 mm to 1031 mm Work table – floor distance: 412 mm to 1292 mm Bed width / space between legs: 535 mm V-blocks: length 206 mm, width 130 mm, height 105 mm Hydraulic oil capacity oil tank: 1400 ml Comes standard with: Set of V-blocks Pressure gauge for pressing force Pre-filled hydraulic oil Easy installation (just install two support legs yourself) Experience ultimate power, precision, and comfort in your workshop – choose the 30T Hydraulic Press with hand and foot controls from MW Tools and experience the difference!

Hydraulic straightening bench 5T MW Tools

The MW Tools 5T Hydraulic Straightening Machine is the ideal solution for professionals who want to quickly and efficiently repair dents and damage to car bodies. Thanks to its powerful hydraulic system and robust construction, this straightening machine delivers top performance, easily removing and correcting any dent or deformity. This versatile machine offers the perfect combination of power, precision, and ease of use. Suitable for removing dents and repairing damage to door panels, wheel arches, bumpers and sills. Multifunctional: dent removal and sheet metal repair with just one device. Powerful hydraulic cylinder with a capacity of 5 tons; requires little physical effort. Stable construction thanks to a sturdy steel base of 1200 mm length and 1160 mm height. Unique 6-finger pull claw for optimal grip; easily attaches to weld-on pins (not included). Flexible chain guidance: directly or via a chain guide to the pull claw for different pulling angles. Adjustable vertical drawbar with a 30° working angle and seven chain positions for maximum versatility. Secure positioning thanks to two rubber support blocks that firmly secure the straightening bench between the chassis and the floor. Includes 780mm wide side support with three mounting positions and adjustable height for different vehicles. Supplied with two pairs of rubber support plates (flat and curved), suitable for any type of bodywork. Two sturdy steel transport wheels (ø 50 mm) for easy movement within the workshop. This hydraulic straightening machine comes complete with a 1.5-meter steel chain, a powerful hydraulic hand pump, a 2-meter rubber oil hose, a 6-finger claw, and a side stand with rubber backing pads. For larger sill dent removal jobs, the included side stand provides extra stability and safety. Optionally available: Hydraulic oil Hydro 46, 5 litres (required quantity: approx. 2 litres). Choose quality, power, and versatility for your workshop with the MW Tools 5T Hydraulic Straightening Bench – the reliable tool for every body repair professional!