Others Products

HBM sanding discs with roloc recording

All our products have a warranty of at least 1 year.

HBM 12 mm. sanding drum

All our products have a warranty of at least 1 year.

HBM lamella sanding discs

(1)

Recording Roll on opname |Diameter 50 mm. |

HBM 10-piece set 50 mm. velcro sanding discs, sanding pads

Technical specifications of the HBM 10-part set 50 mm. Velcro Sanding Discs, Sanding Pads. Packed per 10 pieces. Equipped with Velcro recording.

HBM 100 x 1220 zirconium sanding belts blue

(1)

All our products have a warranty of at least 1 year.

HBM 150 mm. sanding disc with velcro and holes

All our products have a warranty of at least 1 year.

HBM sanding belts 13 x 457 mm. packed per 5 pieces

The flexible and durable aluminum oxide sanding belts fit all 13 x 457 mm sanders. Full resin compound.

HBM 325 mm. professional laminate cutter

(1)

Maximum cutting capacity 15 mm. |

HBM 100 x 1220 mm. ceramic sanding belts

The Ceramic Sanding Belts cut exceptionally fast and remain sharp during grinding because the material renews itself. These professional belts provide cost effective performance in medium pressure applications where an all ceramic tire is overqualified. For professional applications on metal, stainless steel and aluminum with an extremely long service life due to the cooling-grinding effect of the ceramic grain. As a result, there is less heat development, especially on stainless steel and aluminum.

HBM sanding fleece

Recording Roll on opname |

HBM Professional 1500 Watt Concrete Sander - 125 mm

(3)

HBM Professional 1500 Watt Concrete Sander - 125 mm Looking for a concrete sander to make concrete nice and smooth? The HBM Professional 1500 Watt Concrete Sander - 125 mm is the perfect solution for you! This concrete sander is ideal for sanding concrete, tiles and stone. It is simple, dust-free and fast with a constant speed. The large, sturdy and comfortable handle allows you to finish your work accurately. The concrete sander comes with a storage case to store it safely and neatly and to easily take it with you to any job. Product specifications of the HBM Professional 1500 Watt Concrete Sander - 125 mm: Power consumption: 1500 W No-load speed: 1000-8500 rpm Diameter: 125mm Blade material: diamond Inclusive: Diamond cup wheel Storage case In short, the HBM Professional 1500 Watt Concrete Sander - 125 mm is the best solution for your sanding needs. And with the storage case you are sure that you can take this reliable concrete sander anywhere!

HBM 50mm x 5m emery cloth

synthetic resin-bonded corundum scattering (A) on highly flexible textile (brown), uniform and slightly open. With very good grain adhesion, long tool life, low pressure force and very good adaptability. Roll length 5 meters. Width: 50 mm. Application: For pure hand sanding even under extremely high loads, with straightforward tear behavior without fraying. Oil and petroleum resistant, for machining alloyed and unalloyed steel as well as non-ferrous metals. Ideal for machining fittings, reservoirs, castings and forgings, bodywork parts etc.

HBM scotch brite clean & finish roll - 5 meters

Ideal for the daily cleaning of all types of dirt on different surfaces. Easy to rinse and reusable.

HBM polishing felt

Recording Roll on opname |

HBM 200 mm sanding discs

Technical data of these sanding discs. The discs are provided with an adhesive layer for mounting.

HBM cleansing discs

Technical data of the HBM Clean disks. Particularly suitable for removing stubborn and light rust, the removal of paint or paint from metal, the removal of the residual paint on weld seams (stainless steel) and for roughening (of sutures, for example). Suitable for cleaning the weld seam (steel and stainless steel), the matt sanding of steel / stripes during the surface finishing work, cleaning of non-ferrous metals / brass / copper / aluminum, structuring of wood.

HBM waterproof sandpaper pack of 10 pieces

HBM Waterproof sandpaper pack 10 pieces is available in grit 120 to 1200 and is suitable for wet sanding of treated wood, metal, glass, ceramics or polyester and is ideal for removing minor irregularities. Waterproof sandpaper can be used for both dry and wet sanding. Wet sanding has the advantage that no dust is released when sanding, that there are fewer scratches in the substrate and that you also clean and degrease the surface to be painted. Wet sanding is ideal for super smooth sanding for the last layer. Sand only with wet sandpaper on painted wood, never on untreated wood, because water causes the wood to swell. The sandpaper can be used by hand, a sanding block or sander. Dimensions per sheet: 230 x 280 mm.

HBM 300 mm. professional branch saw - pruning saw

(2)

The HBM 300mm. Professional Branch Saw is a handy tool for pruning mature and dead wood up to 200 mm. The ergonomic handle ensures a comfortable grip during use. The total length of this hand saw is approximately 47 cm and the blade is 30 cm long, slightly curved and made of carbon steel. The handle is clear lacquered and equipped with a handy hanging eye. Characteristics: Ergonomic handle Total length: approx. 47 cm Blade length: 30 cm Suitable for pruning mature and dead wood up to 200 mm Made of carbon steel Handle is clear lacquered and equipped with hanging eye With the HBM 300 mm. Professional Branch Saw - Pruning Saw gives you a reliable tool for all your pruning work. Order today and get started in the garden immediately!

HBM 75 x 2000 zirconium sanding belts blue

All our products have a warranty of at least 1 year.

HBM lamella sanding disc with 6 mm. recording

Recording 6 mm. |Grain K80 |

HBM 150 mm sanding discs

Technical data of these sanding discs. The discs are provided with an adhesive layer for mounting.

HBM 225 mm sanding discs

Technical data of these sanding discs. The discs are provided with an adhesive layer for mounting.

HBM velcro sanding disc holder with 6 mm. ash

All our products have a warranty of at least 1 year.

HBM sandpaper pack of 10 pieces

The sandpaper is particularly suitable for manual or mechanical sanding of untreated wood and the removal of old paint and varnish layers. The sheets are A4 size and are available in K60 / K220.

HBM holders with 6 mm. ash

Technical data of the 6 mm HBM Holders. Ash. This holder is suitable for all Roloc recording accessories. The accommodation of this holder is 6 mm. Other Specifications. The sanding discs shown are not included.

HBM 10-piece set 75 mm. velcro sanding discs

Technical data of the HBM 10-piece set 75 mm. Velcro sanding discs Packed per 10 pieces. Equipped with Velcro recording.

HBM 3-piece mini steel brush set

This HBM 3-piece Mini Wire Brush Set contains a steel brush, brass brush and nylon brush. Perfect for cleaning and polishing various surfaces. Technical specifications: 1 x 175 mm Wire Brush 1 x 175 mm Brass brush 1 x 175mm Nylon brush

HBM 75 x 1180 zirconium sanding belts blue

This product has a minimum 1-year warranty. This product is delivered quickly throughout Europe.

HBM 150 mm. zirconium sanding discs blue for metal

Special sanding disc for machining alloyed and unalloyed steel and non-ferrous metals. The discs are provided with an adhesive layer for mounting.

Scheppach Sanding set BTS700, 12 pcs

With the Scheppach Sanding Set BTS700, consisting of 12 pieces, you always have the right sanding accessories at hand. This set contains 3 sanding discs of grit 80, 3 sanding discs of grit 120 and 3 sanding discs of grit 180. In addition, 3 sanding belts are also supplied, of which 1 with grit 60, 1 with grit 100 and 1 with grit 180. Thanks to this set you have Everything you need to sand your workpiece to perfection is immediately at hand. This sanding set is specially designed for use with the BTS700 belt sander from Scheppach. This combination ensures optimal results when sanding wood. The sanding accessories have been carefully selected to ensure that they are suitable for use on wood and that they deliver the desired sanding result. The sanding accessories in this set are made of paper and have perforations for dust extraction. The set is not suitable for sanding glass, metal or stone. The net weight of the set is only 0.16 kg, making the set very easy to use and store. With this Scheppach Sanding Set BTS700, sanding wood is a piece of cake. The set contains all necessary sanding accessories and is specially designed for use with the BTS700 belt sander. Order this sanding set now and benefit from a quick and easy way to sand your workpieces.