Combination machines Products

HBM 2.5 x 300 mm. plate roller for the vice

(1)

Maximum working width 300 mm. |Maximum rolling capacity over the entire working width 2,5 mm. |Diameter of the rollers 32 mm. |

HBM 100 belt and disc sander

Engine power 350 Watt. |Rpm 2860 O/min. |Dimensions of the sanding belt 100 x 915 mm. |Dimensions of the sanding disc 150 mm. |Diameter of the rollers 61 mm. |Table tiltable 0 - 45 graden. |Packaging dimension 560 x 260 x 300 mm. |

HBM 150 belt and disc sander

(1)

Engine power 300 Watt. |Rpm 2950 O/min. |Dimensions of the sanding belt 25 x 762 mm. |Dimensions of the sanding disc 125 mm. |Table tiltable 0 - 45 graden. |Packaging dimension 395 x 275 x 310 mm. |

HBM 200 professional belt and disc sander

Engine power 500 Watt. |Voltage 230 Volt. |Engine speed 2850 O/min. |Dimensions of the sanding belt 100 x 915 mm. |Sanding disc diameter 200 mm. |

HBM 150 x 1220 professional belt and disc sander

Engine power 750 Watt / 1.0 Pk. |Engine speed 2580 O/min. |Belt speed 10.2 M/Sec. |Dimensions of the sanding belt 150 x 1220 mm. |Sanding disc diameter 225 mm. |Sanding surface 150 x 400 mm. |Dimensions 650 x 360 x 400 mm. |Voltage 230 Volt |

HBM 1.2 x 730 mm. press brake

Maximum brewing capacity across the entire working width 1,2 mm. |Maximum working width 730 mm. |

HBM 1.6 x 300 mm sheet metal shears

Maximum cutting capacity 1,6 mm. |Maximum working width 300 mm. |

HBM 200 mm. grinder and belt sander

Voltage 230 Volt |Engine power 900 watt. |Rpm 2950 O/min. |Dimensions of the gray stone 200 x 32 x 30mm. |

HBM 1 x 610 mm. plate mill

Maximum working width 610 mm. |Maximum rolling capacity over the entire working width 1 mm. |Diameter of the rollers 38 mm. |

HBM 150 mm. manual shears

Maximum cutting capacity plate 4 mm. |Maximum cutting capacity around 11 mm. |Blade length 150 mm. |

AOK professional tin snips, sheet metal shears straight

Total length 250 mm. |Length of the pelvis 30 mm. |

AOK professional tin snips, sheet metal shears left

Total length 250 mm. |Length of the pelvis 30 mm. |

HBM 75 x 1180 professional belt and disc sander

Engine power 1100 Watt / 1.5 Pk. |Engine speed 1410 O/min. |Belt speed 11 M/Sec. |Dimensions of the sanding belt 75 x 1180 mm. |Sanding disc diameter 150 mm. |Sanding surface 75 x 330 mm. |Dimensions 665 x 460 x 370 mm. |Voltage 230 Volt |

HBM 1015 mm. roller, set and cut combination with 2 arms model 2

Maximum cutting capacity in steel 1 mm. |Width of the fingers 25 - 50 - 75 - 150 - 200 - 250 - 300 mm. |Maximum working width 1015 mm. |Diameter of the rollers 42 mm. |Maximum seating angle 90 graden. |

HBM 1.5 x 1000 mm. press brake

Maximum brewing capacity across the entire working width 1,5 mm. |Maximum working width 1000 mm. |

HBM 1 x 450 mm. mini press brake

Maximum brewing capacity across the entire working width 1 mm. |Maximum working width 450 mm. |

HBM srg 40 plate roller 1002mm

Maximum working width 1000 mm. |Maximum rolling capacity over the entire working width 1 mm. |Diameter of the rollers 50 mm. |

HBM 1.5x1320 foot cutting shears

Maximum cutting capacity 1,0 mm. |Maximum working width 1320 mm. |

HBM 305 mm. roll, set and cut combination

(1)

Maximum cutting capacity in steel 1 mm. |Width of the fingers 25 - 50 - 75 - 75 - 105 mm. |Maximum working width 305 mm. |Diameter of the rollers 38 mm. |Maximum seating angle 90 graden. |

HBM 760 mm roller, set and cut combination including 2 arms

Maximum cutting capacity in steel 1 mm. |Width of the fingers 25 - 50 - 75 - 150 - 200 - 250 mm. |Maximum working width 760 mm. |Diameter of the rollers 42 mm. |Maximum seating angle 90 graden. |

AOK professional tin snips, sheet metal shears right

Total length 250 mm. |Length of the pelvis 30 mm. |