Lighting and lamps Products

HBM 120 led's rechargeable hood lamp

Charging time 4-5 uur |Burning time Ongeveer 1.5 uur werklicht. |

HBM headlight polishing set complete

(1)

The HBM Headlight Polishing Set Complete is designed to eliminate the worst cases of headlight chipping, yellowing, oxidation and scratches from your headlights. It includes everything needed to repair the most cloudy or sun damaged lenses. Get good results on most plastic lenses, such as headlights, taillights, trailers, boat windows, helmet visors, motorcycle windows and more. Professional results can be produced with this easy-to-use kit at a fraction of the cost. Technical data of the HBM Headlight Polishing Set Complete: HBM Headlight Repair Kit for removing scratches, dull spots and discoloration from headlights Make the car's headlights look like new again, so you benefit from optimal light output for better visibility of the road Can be applied to plastic surfaces To repair weathered and dull headlights: This repair kit contains all products to completely restore weathered, dull and yellowed headlights and restore them to new condition. After the treatment, the headlights look like new again. The headlight does not have to be removed from the car for the treatment, making it easy to do it yourself. Also for other plastic surfaces: This headlight repair kit can also be used on other plastic surfaces, such as boat windows, helmet visors, windshields, taillights and trailer lights. How do I use this Headlight Repair Kit: Clean the surface: Clean the plastic of the headlight with water. Tape off the area around the lens to avoid scratching painted surfaces. Sanding the headlight: Use sanding discs from coarse to fine (P800, P1200, P2000) to completely remove yellowing, tarnish and rust. Polish the headlight: Apply the polishing paste to the polishing wheel and polish the lens until the shine is restored. Protect the headlight: Apply the protective fluid to the lens and let it dry in direct sunlight. Benefits of this DIY Headlight Repair Kit: This do-it-yourself headlight repair kit allows you to easily and quickly repair your car's headlights. This makes the car headlights bright and clear again, which contributes to safety on the road. This set is intended to repair 2 headlights.

HBM magnetic base with 230 volt LED lighting

Total length 60 cm. |

HBM LED lamp on magnetic base

The HBM LED Lamp on magnetic base is a handy and powerful lamp that can easily be attached to metal surfaces thanks to the strong magnetic base. With its 3 bright LEDs, this lamp provides sufficient light to work in dark spaces. The flexible arm ensures optimal direction of the light, while the compact dimensions make the lamp easy to place. Technical data Number of LEDs: 3 Magnetic base diameter: 65 mm Length Flexible part: 120 mm Total Height: 260mm Whether you are tinkering with your car, diving into a cupboard or simply need extra light in a dark place, the HBM LED Lamp on a magnetic base is the ideal companion. Order today and take advantage of its convenient functionality!

HBM magnetic base with 230 volt power LED lighting

(2)

HBM Magnetic base with 230 Volt Power LED lighting Brand: HBM The HBM Magnetic Base with 230 Volt Power LED lighting is equipped with three powerful LED lamps and is adjustable by means of a flexible arm. This magnetic base is ideal for use in your workshop or garage. Other specifications: Equipped with three powerful LED lamps Adjustable by means of a flexible arm Technical data: Total length: 600 mm Voltage: 230 Volts Watts: 3 Watts Length of the cord: 150 cm Head diameter: 50 mm Dimensions of the magnetic base: 58 x 53 x 50 mm Length of the cord: 100 cm With the HBM Magnetic Base with 230 Volt Power LED lighting you always have sufficient light at hand during your work. Order it now and benefit from the many benefits!

HBM 615 mm. flexible gripper with magnet and LED lamp

With the HBM 615 mm. Flexible Gripper with Magnet and LED Lamp, you have a handy tool for various jobs. Thanks to the flexible 600 mm arm, you can easily reach hard-to-reach places. The gripper is equipped with a strong magnet and a bright LED lamp, giving you an even better view of what you want to grab. The grab is made of durable aluminum and is suitable for various purposes. Total length 600 mm Equipped with magnet and LED lamp Made from aluminum This HBM Flexible Gripper makes every task a lot easier. Order it today and experience the convenience!

HBM 700 gram hand pick up magnet with flexible shaft and LED lighting

Maximum capacity of the magnet 700 Gram. |Total length 570 mm. |

HBM professional LED machine lamp

Voltage 230 Volt. |Watt 12. |Length arms 200 x 250 mm. |Total number of LEDs 12. |Dimensions of the foot 65 x 65 mm. |Dimensions of the lamp housing 110 mm. Rond en 130 mm. Diep. |

HBM LED machine lamp with flexible neck

Total length 680 mm. |Voltage 230 Volt. |Watt 3 Watt. |Length of the cord 150 cm. |Diameter of the head 75 mm. |

HBM LED adjustable magnifying lamp with dimmer and table clamp - 3800lux

Diameter of the lens 127 mm. |Magnification 3 X. |Voltage 230 Volt. |Wattage 8 Watt. ( 81 LEDS ) |Lifespan of the LEDS 25.000 uur. |Brightness 3800 Lux. |

Paulmann TriLED cabinet lighting with magnetic contact

(1)

The TriLED cupboard lamp switches on by means of a magnetic contact when you open the cupboard door and off again when you close the door. Easy mounting by means of adhesive pads. Specifications: Article number: 70500 Barcode: 4000870705001 Brand: PAULMANN Net weight (kg): 0.087 Housing color: Aluminum Light color: White Conductor cross-section: 0 mm &: 178; Connection method: Screw terminal Cover luminaire with thermal insulation material possible: Yes Degree of protection (IP): Other Degree of protection (NEMA): Other Diameter: 0 mm Dimmable 0-10 V: No. Dimmable 1-10 V: No. Dimmable DALI: No. Dimmable DMX: No. Dimmable DSI: No. Dimmable GPRS: No. Dimmable LineSwitch: No. Dimmable mains voltage modulation: No. Manufacturer specific dimming: No. Dimmable trailing edge: No. Dimmable leading edge: No. Dimmable with potentiometer (integrated): No. Programmable dimming: No. Dimmable RF: No. Dimmable Sine Wave Reduction: No. Dimmable Touch and Dim: No. Dimmable with push-button: No. Dimmable Zigbee: No. Electrical connection with connector system: No. Energy efficiency: 235; nce class of the built-in lamp: Other Height / depth: 65 mm Lamp holder: None Lamp type: Other Length: 24 mm Lighting fixture with limited surface temperature "D-mark": No. Material: Other Max. system power: 0 W. Not dimmable: No. Number of poles: 2 Protection class: III Effective luminous flux according to IEC 62722-2-1: 0 lm Suitable for emergency lighting: No. Suitable for number of lamps: 2 Ballast: Not necessary Voltage type: DC Width: 66 mm Ballast included: No. With light source: Yes With motion sensor: No. With switch: Yes Instruction manual:

Scangrip Flashlight Flash 1000 R 1000lm

(1)

The Scangrip work lamp and flashlight Flash 1000R is a design of exceptional quality especially for the professional user. With a significantly improved light output, compact design and even more functionality, this work lamp is a real must-have in the workshop. Focus function and Boost mode Adjustable beam angle from 10° to 60° Reaches up to 250 meters Magnetic on/off switch with boost mode increases the light output from 500 to 1000 lumens Boost mode is activated by pressing and holding the power switch for 2 seconds Flashlight automatically switches to normal mode after 60 seconds Practical and Stylish Comes with a clip-on holster so you can carry the lamp close by Made of anodized aluminum for high durability and an ergonomic and secure grip Rechargeable with included USB cable Includes wrist strap for extra grip and safety Waterproof and Durable Protection factor IP54 Can take a beating, for an optimal work light that lasts a long time Specifications Dimensions (LxWxH): 42x42x196 mm Weight: 350 grams In the box: flashlight, clip-on holster, USB cable, wrist strap and manual

HBM rechargeable LED work lamp with 60 LEDs

Number of LEDs 60 Stuks |Charging time 1.5 uur |Length 370 mm |Width 35 mm |

HBM adjustable magnifying lamp with LED lighting, table model

Diameter of the lens 125 mm. |Magnification 3 X. |Voltage 230 Volt. |Wattage 7 Watt. ( 90 LEDS ) |Lifespan of the LEDS 20.000 uur. |Brightness 1000 Lux. |

HBM Professional Double LED Construction Lamp 2 x 150 Watt – 2 x 15,000 Lumen With Tripod

The HBM Professional Double LED Construction Lamp 2 x 150 Watt - 2 x 15,000 Lumen With Tripod from the HBM brand is a powerful construction lamp that offers lighting from every angle. With 15,000 lumens of light and a color temperature of 5000 Kelvin, this double LED construction lamp provides an enormous amount of light, comparable to two 1500 Watt halogen lamps. This while the construction lamp only costs 2 x 150 watts of power. Technical data Double LED Construction lamp 2 x 150 Watt power 2 x 15,000 Lumen light output Color temperature of 5000 Kelvin Shock resistant and long service life IP65 housing (dust-tight and splash-proof) Including ground tripod and 1.7 meter high tripod The HBM Professional Double LED Construction Lamp is equipped with two LED lamps of 150 Watt each, good for a total light output of 15,000 Lumen and a color temperature of 5000 Kelvin. The lamps consist of a matrix of power LEDs in an IP65 housing, which means that they are both dust- and splash-proof and suitable for indoor and outdoor use. The LED lamps have a long lifespan and are shock-resistant, so you can rely on this construction lamp while working. The set comes with a ground tripod and a 1.7 meter high tripod, so you can illuminate from any angle. The special thing about this set is that the ground tripod can be used separately, but can also be mounted on top of the 1.7 meter high tripod, without the need for extra tools. All fastenings are realized by means of hand bolts, which makes the whole very user-friendly. Thanks to the enormous amount of light that this construction lamp offers, you can complete many a job and you do not have to stop early due to lack of good light. The construction lamp is of top quality and will last for years, so you can enjoy it for a long time. In short, the HBM Professional Double LED Construction Lamp is the ideal choice for anyone looking for a powerful and reliable construction lamp.

Scangrip Flashlight Mag Pen 3 Promo-Kit - 2 colours

(2)

The limited-edition MAG promo kit includes 2 MAG work lights from Scangrip. The MAG work lamp has SMD LEDs and a spotlight with 300 lumens. The work lamp has adjustable hooks and strong built-in magnets. The kit comes with 2 USB charging cables, charger not included. Characteristics: Work lamp with SMD LEDs and spotlight with 300 lumens Adjustable hooks and strong built-in magnets Limited edition MAG promo kit with 2 pieces Includes 2 USB charging cables Exclusive charger Specifications: Article number: 49.0398 Bar code: 5708997903988 Brand: Scangrip Net weight (kg): 0.12

HBM professional rechargeable led flashlight 280 lumens model 1

(2)

Watt 3. |Lumen 280. |Total length 220 mm. |Dimensions Cup 120 x 35 x 50 mm. |

HBM Professional Double LED Construction Lamp 2 x 100 Watt – 2 x 10,000 Lumen With Tripod

The HBM Professional Double LED Construction Lamp 2 x 100 Watt - 2 x 10,000 Lumen With Tripod is the ideal choice for anyone looking for powerful and reliable lighting. This construction lamp can illuminate from any angle, from above or below, from the ground or from a height of 1.7 meters. With an enormous amount of light of 10,000 lumens and a color temperature of 5000 Kelvin (cold daylight), this double LED construction lamp is perfectly suited for both indoor and outdoor use. The HBM Professional Double LED Construction Lamp 2 x 100 Watt - 2 x 10,000 Lumen With Tripod offers the same amount of light as two 1000 Watt halogen lamps, while it only costs 2 x 100 Watt of power. This makes the construction lamp not only energy-efficient, but also very cost-effective. The set is well designed and consists of a ground tripod that can be used separately, but can also be mounted on top of a sturdy 1.7 meter high tripod. All fastenings are realized by means of hand bolts, which makes the whole very user-friendly. The LED lamps consist of a matrix of power LEDs in an IP65 housing, making the housing dust-tight and splash-proof (no submersion). LEDs have a long lifespan and are shock-resistant, so you can rely on this construction lamp while working. Thanks to the enormous amount of light that this construction lamp offers, you can complete many a job and you do not have to stop early due to lack of good light.

HBM 300 Lumen Professional Foldable and Rechargeable LED Lamp with Hook and Magnet

This foldable LED lamp from the HBM brand is the ideal solution for illuminating any workplace. The lamp is easy to carry and folds out into a small desk lamp with an elongated LED array. The very bright and diffuse white light, with a color temperature of 4900 Kelvin (warm daylight), illuminates a large area and can be rotated through an angle of 220°. Product features: Stable to place on any surface Fold-out hook to hang the lamp Strong magnet on the bottom to securely attach the lamp to any steel surface Adjustable/tiltable up to 220 degrees Burning time approx. 3 hours Charging time approx. 3-4 hours Super bright thanks to the 300 Lumen POWER LED Extra flat and easy to carry Includes USB cord and adapter The foldable LED lamp is equipped with a strong Li-ion battery and can also be powered by the adapter. This makes it the ideal travel lamp for a camper or caravan, the LED desk lamp for a work table at a job location, or a magnetic LED lamp for when you are tinkering with the car! Technical specifications: 3Watt COB LED on the front 300 Lumen POWER LED Equipped with a strong magnetic back Equipped with hanging hook Equipped with rechargeable Li-ion battery The HBM 300 Lumen Professional Foldable and Rechargeable LED Lamp is the perfect solution for bright and versatile lighting in any workplace.

HBM 225 mm wall and ceiling sander - 750 watt with LED lamp

Net weight (kg) 4,5 |Dimensions width 270 mm |Dimensions height 260 mm |Dimensions length 1200 - 1700 mm |Sanding disc Ø 225 mm ( Klittenband opname ) |Engine power 230 Volt |Power 750 W |Rpm 700 - 1700 tr/min |

Scangrip Worklight Retro Lite 1600lm

The Scangrip Work Light Retro Lite is a must-have tool for anyone looking for a 360 degree LED work light with a uniquely cool design. With this lamp you have quiet and bright lighting to illuminate any work area. Special characteristics: - 360 degree LED work lamp with cool design. - Built-in charging circuit. Specifications: - Barcode: 5708997356357 - Brand: SCANGRIP - Net weight (kg) 1.25 - Light color: Cold white - Color rendering index: 80-89 - Color temperature: 6500 - 6500 K - Conductor cross-section: 2 mm² - Degree of protection (IP): IP54 - Depth: 120 mm - Energy efficiency class of the built-in lamp: A++, A+, A (LED) - Impact resistance: IK07 - Lamp holder: Integrated LED - Lamp type: LED not interchangeable - Length: 350mm - Connection cable length: 5 m - Housing material: Metal/plastic - Max. system power: 22 W - Version: Construction lamp - Nom. voltage: 100 - 240 V - Control via app: No - Effective luminous flux according to IEC 62722-2-1: 1600 lm - Rechargeable: No - Response brightness: 0 - 900 lx - Width: 177mm - With light source: Yes - With protective cover: No - With tripod holder: No - With wheels: No Order the Scangrip Work Lamp Retro Lite today and experience the convenience and brightness of this lamp.

HBM 8 LED mini flashlight with magnetic base

Length 160 mm. |Diameter 15 - 30 mm. |Batteries 3 x AAA. |Led 8 Leds. |Lumen 22. |Material Plastic. |

RELED Work lamp Rechargeable 60 LED

The RELED Work Light Rechargeable 60 LED is a handy compact lamp that is suitable for both work and walking lighting. With no fewer than 60 LEDs and a rechargeable battery, this work light is an absolute must-have for every handyman. Special characteristics 60x LED Work/Walking Lamp Rechargeable Battery: 7.2V 800 MAH Ni-MH Burning time: 3 hours AC/DC and 12V charger Equipped with magnet Equipped with hanging hook Specifications Article number: RE814021 Barcode: 8718309814021 Brand: RELED Net weight (kg): 0.66 Flashing light function headlamp: No Built-in charging circuit: No Housing color: Black Color temperature: 3000 - 3000 K Energy efficiency class of the built-in lamp: A++, A+, A (LED) Height/depth: 60 mm Length: 450mm Headlamp: LED not interchangeable Housing material: Plastic Nom. voltage: 220 - 250 V Protection class: II Effective luminous flux according to IEC 62722-2-1: 60 lm Rechargeable: Yes Suitable for emergency lighting: No Voltage type: AC/DC Width: 110mm With light source: Yes In short, the RELED Work Light Rechargeable 60 LED is a top quality product, perfect for every handyman. Order now and increase your productivity!

HBM professional LED aluminum mini flashlight with magnetic base 400 lumens

Diameter 22,5 - 27,5 mm. |Batteries 3 x AA. |Led 2 kleuren Powerled. |Lumen 400!! |Material Aluminium. |

HBM 450 lumen professional foldable and rechargeable LED lamp with 3 functions and magnet

(1)

Battery type Li-ion 18650 - 3,7 Volt - 2600MAH. |Extra flat head 150 x 20 x 6 mm. |Dimensions open 355 x 53 mm. |

HBM professional rechargeable extra narrow LED flashlight 300 lumens

Watt 3. |Lumen 300. |Total length 360 mm. |Extra flat head 200 x 22,5 x 10 mm. |

Steinel Sensor spot LS 300 LED black

(1)

The STEINEL sensor spotlight LS 300 LED is extremely bright, strong and alert. This infrared sensor is ideal for efficiently illuminating large areas around buildings. The detection angle of 240° and 12 m reach ensure optimum illumination. The robust die-cast aluminum head and the protection degree of IP44 ensure that this sensor spot is suitable for outdoor use. The spot has a light output of 3120 lm, light color of 4000 K and consumes 20.5 W. Available in black and white. Specifications Article number: 067571 Bar code: 4007841067571 Brand: STEINEL Net weight (kg): 0.99 Adjustability: Rotatable and pivotable Beam angle: Extremely wide beam >80° Color consistency (McAdam ellipse): SDCM3 Housing colour: Black Light color: White Color Rendering Index: 80-89 Color Temperature: 4000-4000K Connection method: Other Luminaire cover with thermal insulation material possible: No Degree of protection (IP): IP44 Suitable for outdoors: Yes Dimmable: No Dimmable 0-10 V: No Dimmable 1-10 V: No Dimmable DALI: No Dimming depending on ballast: No Dimmable DMX: No Dimmable DSI: No Dimmable GPRS: No Dimmable LineSwitch: No Dimmable mains voltage modulation: No Manufacturer-specific dimming: No Dimmable phase cut: No Dimmable phase control: No Dimmable with potentiometer (integrated): No Dimming programmable: No Dimmable RF: No Dimmable Sine Wave Reduction: No Dimmable Touch and Dim: No Dimmable with push button: No Dimmable Zigbee: No Emergency power supply integrated: No Energy efficiency class of the built-in lamp: A++, A+, A (LED) Energy efficiency class of the included replaceable bulb: A++ Glow wire test according to IEC 60695-2-11: 650 °C - 30 s Height/Depth: 241mm Impact resistance: IK03 Lampholder: Other Bulb type: LED not interchangeable Led nom. current at constant current: 70 - 70 mA Length: 186mm Light distributor: None Light emission: Direct Light distribution: Symmetrical Luminaire specific luminous flux: 101,961 lm/W Lighting fixture with limited surface temperature "D mark": No Luminous flux: 3120 - 3120 lm Cover material: Glass transparent Housing material: Aluminium Version: Outdoor fixture Not dimmable: Yes Nom. voltage: 220 - 240 V Number of poles: 2 Photobiological safety according to EN 62471: RG1 Power factor: 0.6 Protection class: I Nom. ambient temperature according to IEC62722-2-1: -10 - 30 °C Effective luminous flux according to IEC 62722-2-1: 3120 lm Reflector: None Suitable for recessed mounting: No Suitable for ceiling mounting: No Suitable for clamp mounting: No Suitable for emergency lighting: No Suitable for functional room: No Suitable for garage: No Suitable for hall / corridor: No Suitable for hotel: No Suitable for indoor: No Suitable for lamp power: 30.6 - 30.6 W Suitable for busbar mounting: No Suitable for low voltage cable system: No Suitable for pedestal/floor mounting: No Suitable for sanitary room: No Suitable for school room: No Suitable for sports hall: No Suitable for storage space: No Suitable for surface mounting: Yes Suitable for pendulum suspension: No Suitable for office: No Suitable for truss mounting: No Wall Mount: Yes Suitable for wall mounting: Yes Suitable for warehouse: No Suitable for VDU workstation according to EN 12464-1: No Ballast: Electronic transformer Wiring type: Suitable for through wiring Voltage type: AC Width: 213mm Ballast included: Yes With light sensor: Yes With light source: Yes With motion sensor: Yes

Harlingen Industrial Loupe With LED Lighting

A magnifying glass or eye loupe is a useful tool in many situations and workplaces. With this Harlingen loupe you always have high-quality magnification material at hand. This loupe is easy to hold, magnifies up to 10x and has built-in LED lighting. The loupe comes with a handy storage pouch. Product specifications Lens diameter 30mm magnification 10x Relief 8 LEDs Min. graduation 0.1mm Number of scaling options 13 Dimensions 52x42mm

HBM 125 mm. led loupe lamp with base and table clamp

Diameter of the lens 85 mm. |Magnification 5 X in de grote lens. |Magnification 12 X in de kleine lens. |Voltage 230 Volt. |Wattage 6 Watt. ( 45 LEDS ) |Lifespan of the LEDS 25.000 uur. |Brightness 2200 Lux. |

HBM foldable LED flashlight 200 lumens - red

Total length 335 mm. |Extra flat head 160 x 30 x 12 mm. |Brightness 200 Lumen! |