Thread repair kits Products

AOK 13-piece professional impact screwdriver with crazy bolt remover set

(1)

The HBM AOK 13 Piece Professional Impact Driver With Dolle Bolts Remover Set is a great addition to your toolbox and is designed to handle a range of jobs. With its impressive impact power and mad bolt removal, you'll never struggle to loosen rusted bolts or screws again. Technical data 1 x Impact Screwdriver 1 x Adapter from 1/2" Socket Socket to 5/16" Bit Socket 1 x Bit Crosshead Ph 2 1 x Bit Phillips head Ph 3 1 x Bit Crosshead Ph 2 - extra long 1 x Bit Straight 8 mm 1 x Bit Straight 10 mm 1 x Bolt Remover 1 / M3 - M6 1 x Bolt Remover 2 / M6 - M8 1 x Bolt Remover 3 / M8 - M11 1 x Bolt Remover 4 / M11 - M14 1 x Bolt Remover 5 / M14 - M19 1 x Steel storage box The set comes in a durable steel storage box that protects your tools and is easy to carry. With this set you can rely on the power and quality of HBM tools in every situation. Order today and add the HBM AOK 13 Piece Professional Impact Screwdriver With Dolle Bolts Remover Set to your tool collection.

HBM m 5 - m 12 screw thread repair set

Set consists of M 5 x 0,8.M 6 x 1.M 8 x 1,25.M 10 x 1,5.M 12 x 1,75. |Height of the threaded bushes 1,5D. |

HBM 14 piece power crazy bolt and nut removal set

Sizes 10 - 11 - 12 - 13 - 14 - 16 - 17 - 18 - 19 - 21 - 22 - 24 - 27 mm. |Recording 3/8" |Suitable for Slagmoersleutels / Ratels |

HBM 52 piece thread meter metric / withworth

Technical data of the HBM 52 Piece Metric / Withworth Threadmeter Withworth 55 degrees From 5 to 62 G. Metric 60 degrees From 0.25 to 6.00 mm.

HBM 25-piece professional bolt / threaded rod, stud remover set

With the HBM 25-piece professional bolt / threaded end, stud remover set you can remove broken bolts or studs in the best way. The supplied drill guides make it possible to drill centered effortlessly without causing unnecessary damage. Then place the matching pin in the drilled hole and the bolt can be loosened. Technical data of the HBM 25-piece professional bolt / threaded end, stud remover set: 5 HSS drills: 1/8" (3.175mm), 3/16" (4.76mm), 1/4" (6.35mm), 5/16" (7.94mm), 11/32" (8.73mm) 10 drill guides: from 9/32" (7.14mm), 5/16" (7.94mm), 11/32" (8.73mm), 3/8" (9.53mm), 13/32" (10.32mm), 7/16" (11.11mm), 15/32" (11.91mm), 1/2" (12.7mm), 17/32" (13.49mm), 9 /16" (14.29mm) 5 extractor nuts: N1 - 1/8" (3.175mm), N2 - 3/16" (4.76mm), N3 - 1/4" (6.35mm), N4 - 5/16" (7.94mm), N5 - 11/32" (8.73mm) 5 extractor pins: #1, #2, #3, #4, #5 The HBM 25-piece professional bolt / threaded end, stud remover set is a handy and complete set that ensures that bolts and studs can be easily removed. Order now and benefit from our fast delivery and excellent service.

Volkel helicoil repair kits

All our products have a warranty of at least 1 year.

HBM 4-piece crazy screws removerset model grabit

The HBM Dolle Screws remover set model Grabit is ideal for removing broken and damaged screws easily and easily. This set is suitable for removing almost all screws, bolts and threaded ends from all types of materials. Even stainless steel is no problem. You choose the right size and turn anti-clockwise to make a new screw head. Then, using the special screw head, unscrew the damaged screw or bolt. Suitable for Ideal for every professional.

HBM crazy screws removerset model grabit

Technical data of the HBM Dolle Screws remover set model Grabit. The HBM Dolle Screws remover set model Grabit is ideal for removing broken and damaged screws easily and easily. This set is suitable for removing almost all screws, bolts and threaded ends from all types of materials. Even stainless steel is no problem. You choose the right size and turn anti-clockwise to make a new screw head. Then, using the special screw head, unscrew the damaged screw or bolt. Suitable for Ideal for every professional.

HBM crazy screws and hex removerset model 2

Perfectly suited for loosening crazy screws and Allen screws. Technical details of the HBM Dolle Screws and Allen key model 2. Set consists of the following sizes M3.2 - M4 - M4.8 - M5.5 - M6.3 - M7 - M8 - M8.7 - M9.5 - M10.3. The HBM Dolle Screws and Allen key set model 2 is delivered including: Nice aluminum storage box.

left tap set / easy out set

Technical data of the HBM Easy out set: Suitable for broken bolts. Size range from M3 to M19. With matching HSS drill bits. The left tap set / Easy out set from HBM is the perfect solution for removing broken bolts. The kit includes a selection of left hand taps and easy outs, which can help remove damaged bolts without damaging the thread. With a size range from M3 to M19, this set is suitable for a wide variety of applications. In addition, matching HSS drills are included to make the job even easier. Make sure you always have the right tools at hand for your job, and purchase the HBM Left tap set / Easy out set today!

HBM Male Thread Repairer, Thread Repair Tool, Male Thread Repair Tool MM and INCH

Repairing damaged threads is a breeze with this HBM Male Thread Repairer, Thread Repair Tool, Male Thread Repair Tool MM and INCH. A handy case gives you enough space to store all tools safely and clearly. You use the tool for repairing broken threads, but also for strengthening aluminum threaded connections. A visual overview on the inner flap of the steel case provides a lot of information about the use of the set. You also have access to the technical data of all the tools. The HBM Male Thread Repairer, Thread Repair Tool, Male Thread Repair Tool MM and INCH comes with, 1 x attachment metric 1.0-1.25-1.5-1.75 mm 1 x attachment metric 2.0-2.5-3.0-3.5 mm 1 x attachment inch 4-5-6-7 1 x attachment inch 7.5-9-11-11.5 1 x attachment inch 8-10-12-14 1 x attachment inch 16-18-20-24

HBM 4-part threaded rod, stud extractor set - threaded extractor

With the HBM 4 Piece Threaded End, Stud Extraction Set - Threaded End Extractor, unscrewing defective threaded ends and studs is a thing of the past. This handy set is suitable for threaded rods of 6, 8, 10 and 12 mm and has a reception of 1/2" or 21 mm. It also has a square drive according to DIN 3120 - ISO 1174 with ball lock and a hexagonal drive SW 21. The set also has a right and left tension function and a good grip thanks to the 3 clamping bushes. Features of the HBM 4 Piece Threaded End, Stud Extraction Set - Threaded End Extractor: suitable for loosening defective threaded rods and studs of 6, 8, 10 and 12 mm square drive according to DIN 3120 - ISO 1174 with ball lock hexagon drive SW 21 with right and left clamping function good grip due to 3 clamping bushes screw in and out without having to screw 2 nuts on the threaded end the power transmission runs via 3 internal shafts, which clamp the stud suitable for longer threaded ends thanks to the hollow shaft high gloss chrome plated chrome vanadium In short, the HBM 4-piece threaded end, stud extractor set effortlessly turns out defective threaded ends and studs and is also suitable for longer threaded ends. In addition, this printout set is high-gloss chrome-plated and made of chrome vanadium.

HBM thread gauge metric / withworth

Technical data of the HBM Metric / Withworth Threadmeter. HBM Metric and Withworth thread meter. Withworth 55 degrees From 5 to 62 G. Metric 60 degrees From 0.25 to 6.00 mm. HBM Metric thread gauge. Metric 60 degrees From 0.25 to 6.00 mm.

HBM unf screw thread repair set

Set consists of 1/4 x 28.5/16 x 24.3/8 x 24.7/16 x 20.1/2 x 20. |Height of the threaded bushes 1,5D. |

HBM 9 Piece Lambda Sensor Thread Repair Kit

The 9-Piece Lambda Probe Thread Repair Kit is for repairing lambda/oxygen sensors, injectors/atomizers and thermo-switches in hard-to-reach places. This lambda sensor thread repair kit comes in a handy transport case. The 9 HBM 9 Piece Lambda Sensor Thread Repair Kit is supplied incl. 1 x Reamer with 18.6 mm diameter 1 x tap M 20 x 1.5 1 x tap M 18 x 1.5 1 x handy storage case.

Volkel v-coil set

All our products have a warranty of at least 1 year.

AOK 11-piece professional crazy screw removerset model grabit

Material Top kwaliteit S2 gehard HRC60. |Recording 1/4" HEX en 10 mm. |

HBM metric screw thread repair sets

Contains all supplies for repairing damaged threads. Drill the hole with the included drill. Tap new thread in the hole. Install a threaded sleeve with mounting accessory. The original bolt now fits in the threaded sleeve. Also used to reinforce threaded connections in aluminum. Threaded sleeves also available separately to supplement the set. The sets from M 5 to M 10 are supplied with 25 stainless steel threaded bushes. The sets from M 12 to M 14 are supplied with 10 stainless steel threaded bushes. The set of M 16 is supplied with 5 stainless steel threaded bushes. PAY ATTENTION !! The set of M 16 is supplied WITHOUT drill. The HBM Metric Screw Thread Repair Kits are supplied as standard. Height of the threaded bushes: 1.5D. HSS G Tap. HSS drill. Stainless steel threaded bushes. Steel storage box. Thread handle.

HBM m 6 - m 10 screw thread repair set

Set consists of M 6 x 1.M 8 x 1,25.M 10 x 1,5. |Height of the threaded bushes 1,5D. |

HBM tap stools

A tapping stool is used when manually making internal threads with the aid of taps. It is intended for smaller sizes, up to roughly M12. It consists of a rotatable clamp in which the tap is placed. A tap has a square head, which is why a tap stool does not have three, but four clamping lips, unlike the drill chuck. A tap stool with ratchet can also be turned around in a smaller angle. A wringing iron can also be used to rotate taps.

HBM loose stainless steel threaded bushes

The sets from M 5 to M 10 consist of 25 stainless steel threaded bushes. The sets from M 12 to M 16 consist of 10 stainless steel threaded bushes.

HBM m 5 - m 12 screw thread repair set with extra long 2d threaded bushes

Set consists of M 5 x 0,8.M 6 x 1.M 8 x 1,25.M 10 x 1,5.M 12 x 1,75. |

HBM unc screw thread repair set

Set consists of 1/4 x 20.5/16 x 18.3/8 x 16.7/16 x 14.1/2 x 13. |Height of the threaded bushes 1.0D. |

KWB Screw extractor set 5-Del,

CV steel, for removing broken screws, bolts and pipe ends, with square, for manual operation with open-ended spanner and tool holder. Specifications: Item number: KWB444300 Barcode: 4009314443004 Brand: KWB Net weight (kg): 0.112

HBM 17-piece mad, broken nuts, bolts and studs extractor set

The HBM 17 Piece Dolle and Broken Nuts, Bolts and Studs Extraction Set is a very complete set for screwing in and out crazy and broken bolts and studs. The set consists of: 5 x left tap M3 to M18 4 x cap for screwing in and out studs M6/M8/M10/M12 (1/2" connection) 8 x special cap with zigzag profile for screwing in and out of flattened bolts and nuts M9/10/11/12/13/14/16/19mm (3/8" connection) With this set you are prepared for any job that requires loosening loose and broken bolts and studs. The brand of this set is HBM, which guarantees quality and durability.

HBM 5-piece crazy bolt remover set for impact screwdriver

Technical data of the HBM 5 Piece Dolle Bolt Remover Set For impact screwdriver. Bit 1 M3 - M6. Bit 2 M6 - M8. Bit 3 M8 - M11. Bit 4 M11 - M14. Bit 5 M14 - M19.

HBM 15 Piece Thread Repair Tap and Cutting Set Including Thread File

This HBM 15 Piece Thread Repair Tap and Cutter Set Including Thread File, including 7 metric thread cutters, 7 metric thread taps and 1 double-sided thread file, is ideal for quickly repairing damaged threads on metric bolts and nuts. These thread cutters and taps are used to remove damaged threads and kinks and burrs. The included thread file is ideal for quick cleaning and repair of hard-to-reach external threads. This set is made of robust steel and is very sturdy and durable. Dimensions of the thread cutters and taps: 6x1.00mm ; 8x1.25mm; 10x1.25mm; 10x1.50mm; 12x1.25mm; 12x1.5mm; 12x1.75mm Dimensions of the metric thread file 0.75 mm; 1.0mm; 1.25mm; 1.5mm; 1.75mm; 2.0mm; 2.5m; 3.0mm Product Features Material Steel Contents of the package 7 x metric thread cutters 7 x metric thread taps 1 x Double Sided Thread File

HBM thread repair, tap and cutting set 48-piece

Damaged screw thread is a nuisance if you want to fasten parts with bolts. With this set you solve that problem. The set contains all necessary accessories and parts to repair broken threads. With the files you remove damage and burrs. After which you can restore the screw thread with the dies and taps. The set comes in a more convenient storage case, where each part has its own permanent place so that you can always find the right part quickly and easily. Specifications Storage case material: plastic Type of taps and dies: Metric and UNC/UNF Supplied as standard 16 wire files (9, 10, 11, 2 x 12, 13, 14, 2 x 16, 18, 2 x 20, 24, 27, 28, 32 mm) 7 UNC/UNF threading dies (1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 inch) 10 metric threading dies (M6 x 1.0, M8 x 1.25, M10 x 1.0, M10 x 1.25, M10 x 1.5, M11 x 1.5, M12 x 1.25, M12 x1.5, M12 x 1.75, M14 x 1.5 mm) 6 UNC/UNF thread taps (1/4, 5/16, 3/8, 7/16, 1/2, 9/16 inch) 10 metric taps (M6 x 1.0, M8 x 1.25, M10 x 1.0, M10 x 1.25, M10 x 1.5, M11 x 1.5, M12 x 1.25, M12 x1.5, M12 x 1.75, M14 x 1.5 mm) Storage case With the 48-piece HBM thread repair, tap and cutting set, you have everything you need to repair broken threads. The set includes files, dies and taps in both metric and UNC/UNF sizes. The set comes in a handy storage case, where each part has its own permanent place. This way you can always quickly find the right part. The perfect solution for damaged threads!