Sanding machines Products

HBM 12 mm. sanding drum

All our products have a warranty of at least 1 year.

HBM lamella sanding discs

(1)

Recording Roll on opname |Diameter 50 mm. |

HBM sanding discs with roloc recording

All our products have a warranty of at least 1 year.

HBM 100 x 1220 zirconium sanding belts blue

(1)

All our products have a warranty of at least 1 year.

HBM 10-piece set 50 mm. velcro sanding discs, sanding pads

Technical specifications of the HBM 10-part set 50 mm. Velcro Sanding Discs, Sanding Pads. Packed per 10 pieces. Equipped with Velcro recording.

HBM profi pneumatic 50 mm. sander

No-load speed 15000 O/min. |Sanding disc diameter 50 mm. |Recording ROLOC ( draad ) |Air consumption 85 L/min. |Dimensions 165 x 75 mm. |

HBM sanding belts 13 x 457 mm. packed per 5 pieces

The flexible and durable aluminum oxide sanding belts fit all 13 x 457 mm sanders. Full resin compound.

HBM 100 x 1220 mm. ceramic sanding belts

The Ceramic Sanding Belts cut exceptionally fast and remain sharp during grinding because the material renews itself. These professional belts provide cost effective performance in medium pressure applications where an all ceramic tire is overqualified. For professional applications on metal, stainless steel and aluminum with an extremely long service life due to the cooling-grinding effect of the ceramic grain. As a result, there is less heat development, especially on stainless steel and aluminum.

HBM 50mm x 5m emery cloth

synthetic resin-bonded corundum scattering (A) on highly flexible textile (brown), uniform and slightly open. With very good grain adhesion, long tool life, low pressure force and very good adaptability. Roll length 5 meters. Width: 50 mm. Application: For pure hand sanding even under extremely high loads, with straightforward tear behavior without fraying. Oil and petroleum resistant, for machining alloyed and unalloyed steel as well as non-ferrous metals. Ideal for machining fittings, reservoirs, castings and forgings, bodywork parts etc.

HBM sanding fleece

Recording Roll on opname |

HBM scotch brite clean & finish roll - 5 meters

Ideal for the daily cleaning of all types of dirt on different surfaces. Easy to rinse and reusable.

HBM Professional 1500 Watt Concrete Sander - 125 mm

(2)

To get concrete nice and smooth, you need a concrete sander. The HBM Professional 1500 Watt Concrete Sander - 125 mm is very suitable for this. This concrete sander is very suitable for concrete, tiles and stone and is suitable for clean, dust-free and easy sanding at a constant speed. Thanks to the large, sturdy and comfortable handle, you can continue to work accurately. The machine comes with a storage case, with which you always keep it clean and safe. As a result, you can quickly store the concrete sander and you can easily take it with you to any job. Product specifications of the HBM Professional 1500 Watt Concrete Sander - 125 mm Power consumption 1500 W No-load speed 1000 - 8500 RPM Diameter 125mm Blade material diamond The HBM Professional 1500 Watt Concrete Sander - 125 mm is supplied including Diamond cup disc storage case

HBM 330mm pneumatic power file / belt sander

(2)

No-load speed 16000 O/min. |Dimensions of the sanding belt 10 x 330 mm. |Air consumption Ca. 150 L/min. |Dimensions 280 x 75 mm. |

HBM 75 x 2000 zirconium sanding belts blue

All our products have a warranty of at least 1 year.

HBM cleansing discs

Technical data of the HBM Clean disks. Particularly suitable for removing stubborn and light rust, the removal of paint or paint from metal, the removal of the residual paint on weld seams (stainless steel) and for roughening (of sutures, for example). Suitable for cleaning the weld seam (steel and stainless steel), the matt sanding of steel / stripes during the surface finishing work, cleaning of non-ferrous metals / brass / copper / aluminum, structuring of wood.

HBM lamella sanding disc with 6 mm. recording

Recording 6 mm. |Grain K80 |

HBM profi variable pneumatic 50 mm. sander

(1)

No-load Maximum Speed 15000 O/min. |Sanding disc diameter 50 mm. |Recording ROLOC ( draad ) |Air consumption 85 L/min. |Dimensions 165 x 75 mm. |

HBM waterproof sandpaper pack of 10 pieces

HBM Waterproof sandpaper pack 10 pieces is available in grit 120 to 1200 and is suitable for wet sanding of treated wood, metal, glass, ceramics or polyester and is ideal for removing minor irregularities. Waterproof sandpaper can be used for both dry and wet sanding. Wet sanding has the advantage that no dust is released when sanding, that there are fewer scratches in the substrate and that you also clean and degrease the surface to be painted. Wet sanding is ideal for super smooth sanding for the last layer. Sand only with wet sandpaper on painted wood, never on untreated wood, because water causes the wood to swell. The sandpaper can be used by hand, a sanding block or sander. Dimensions per sheet: 230 x 280 mm.

HBM polishing felt

Recording Roll on opname |

HBM power file / electric belt sander 260 watts

(1)

Power 260 Watt. |Voltage 230 Volt. |Belt speed Traploos regelbaar van 330 tot 550 Meter per minuut. |Dimensions of the sanding belt 13 x 457 mm. |Dimensions of the machine 480 x 75 x 60 mm. |

HBM sandpaper pack of 10 pieces

The sandpaper is particularly suitable for manual or mechanical sanding of untreated wood and the removal of old paint and varnish layers. The sheets are A4 size and are available in K60 / K220.

HBM 175 / 150mm professional polisher - sander

Diameter of the polishing wheel 175 mm. |Sanding disc diameter 150 mm. |No-load speed 3000 O/min. |Workload Ca. 6 bar. |Air consumption Ca. 325 L/min. |

HBM 150 mm. profi pneumatic vacuum sander

Sanding disc diameter 150 mm. |No-load speed 10000 o/min. |Air consumption 130 L/min. |

HBM 35-piece sanding, polishing and clean set with 6 mm mandrel

The HBM 35-piece Sanding, Polishing and Clean set with 6 mm mandrel from the HBM brand is a multifunctional set that is suitable for various sanding, polishing and cleaning activities. The set consists of 35 different parts, including sanding discs, nylon sanding fleece and cleaning discs with a diameter of 50 mm and a Roloc holder. 5 x Sanding disc 50mm. K60 with Roloc recording. 5 x Sanding disc 50mm. K80 with Roloc recording. 5 x Sanding disc 50mm. K100 with Roloc recording. 5 x Nylon Abrasive Fleece 50 mm. FINE with Roloc recording. 5 x Nylon Abrasive Fleece 50 mm. MEDIUM FINE with Roloc reception. 5 x Nylon Abrasive Fleece 50 mm. COARSE with Roloc recording. 4 x cleaning disc 50 mm. with Roloc recording. 1 x Roloc holder with 6 mm. Axis Recording. The sanding discs are available in grit thicknesses K60, K80 and K100 and ensure fast and efficient material removal. The nylon abrasive fleece pads are available in FINE, MEDIUM FINE and COARSE and are suitable for polishing and cleaning surfaces. The cleaning discs are perfect for removing rust, paint and other stubborn dirt. The Roloc holder with 6 mm axle reception ensures that the parts can be replaced quickly and easily. This set is suitable for use with a drill or other tools with a 6 mm arbor. In short, the HBM 35 Piece Sanding, Polishing and Clean set with 6 mm mandrel is a complete set that is suitable for various activities and an absolute must-have for every do-it-yourselfer.

HBM 150mm pneumatic sander

Sanding disc diameter 150 mm. |Workload 6 Bar. |Air consumption 120 Liter per Minuut. |No-load speed 9000 O/min. |Dimensions 175 x 145 mm. |

HBM 150 mm. sanding disc with velcro and holes

All our products have a warranty of at least 1 year.

HBM 520mm pneumatic power file / belt sander extra wide

No-load speed 16000 O/min. |Dimensions of the sanding belt 20 x 520 mm. |Air consumption Ca. 150 L/min. |Dimensions 350 x 90 mm. |

HBM satin machine - brush machine

Engine power 1200 Watt |No-load speed 1000-3000 min |Maximum wheel diameter 120 mm |Maximum wheel length 100 mm |Diameter of the recording shaft 19 mm. |

HBM 150 belt and disc sander

Engine power 300 Watt. |Rpm 2950 O/min. |Dimensions of the sanding belt 25 x 762 mm. |Dimensions of the sanding disc 125 mm. |Table tiltable 0 - 45 graden. |Packaging dimension 395 x 275 x 310 mm. |

HBM sanding drum for the HBM mini satin machine / sander 60 x 45 mm. k120

Dimensions 60 x 45 mm. |Grain K120. |