Measuring tools Products

HBM magnetic clock stand with dial indicator

Battle 10 mm. |Reading 0,01 mm. |

HBM digital caliper 150 mm

Technical data of the HBM Digital Vernier Caliper 150 mm MM function, Inch function. This caliper is equipped with a plastic housing. Length of the jaws 40 mm This digital caliper is supplied as standard. 2 batteries. Plastic storage case.

HBM digital block hook - swiveling hook 200 mm model 3

Technical data of the HBM Digital Block Hook - Zweihaak 200 mm Model 3. Dimensions of the blade 200 mm. Measuring range 0 - 360 degrees. Reading 0.05 degrees. Purity +/- 0.30 degrees. Other specifications. Auto off function. Large LCD display. O position button. Hold function. Reverse angel function.

HBM 150 mm. professional passer

Maximum opening 90 Gr. |

HBM bodywork measuring wedge / rebate meter

Measuring range 0,5 - 11,5 mm |Material ABS kunststof |

HBM digital block hook - swiss hook model 1

Technical data of the HBM Digital Block Hook - Zweihaak Model 1. Model 1 - 130 x 130 mm. Dimensions 130 x 130 mm. Range 0 - 360 Degrees x 0.1 degrees. Zero function. On / Off function. Can be locked. Model 1 - 200 x 200 mm. Dimensions 200 x 200 mm. Range 0 - 360 Degrees x 0.1 degrees. Zero function. On / Off function. Can be locked. Model 1 - 500 x 200 mm. Dimensions 500 x 200 mm. Range 0 - 360 Degrees x 0.1 degrees. Zero function. On / Off function. Can be locked.

HBM block hooks

All our products have a warranty of at least 1 year.

HBM protractor model 2

Protractor width 80 mm. |Protractor width 120 mm. |

HBM electronic hanging scale 50 kg.

Range 0 t/m 50 Kg. |Reading KG / LBS / OZ. |Graduation 1 Gram tot 10 Kg, boven de 10 Kg per 10 Gram / 0,01 LBS / 0,1 OZ. |

HBM magnetic analog inclinometer

Durable, 100 mm. plastic housing with a handy magnetic base. Clear, easy-to-read watch face in 90 ° quarters. For roofing, scaffolding and general angle measurements.

Dasqua professional digital angle meter +/- 180 degrees

Dimensions of the blade 200 mm. |Measuring range 0 - 360 Graden. |Reading 0,05 Graden. |Purity +/- 0,30 graden. |

HBM 175 mm laser spirit level including tripod

Length 170 mm. |Material Aluminium statief + aluminium/Kunststof behuizing. |Working height 10-23 cm. |Nutrition 2 x AAA batterijen (inbegrepen). |

HBM aluminum angle triangle - block hook - measuring triangle

Strong aluminum frame with clear imperial scale and clear conversion table. T-shaped edge for optimum placement. Protractor up to 90 °. Use for angle measurements and as a saw guide. Weight 125 g. Dimensions: 185 x 185 x 260 mm.

HBM 1 - 13 mm. drill gauge

Stainless steel plate for measuring drill bits and other small objects from 1 to 13 mm. Etched grades.

HBM professional spirit levels

Technical data of the HBM Professional Levels Total length, 30, 60, 100 cm. 2 Dragonflies 1.3 mm Aluminum profile Shockproof 30 Year Warranty

HBM Professional Tile Cutters

Technical data of the HBM Professional Tile Cutters. Maximum capacity: 800 - 1000 - 1200 mm. Suitable for tile thicknesses 3 - 14 mm. Extruded aluminum base. Reinforced 18mm guides for increased resilience. Chrome-plated and rectified guides with anti-rust treatment. For ceramic tiles, floor tiles and mosaics, stoneware, porcelain and guide. Two side supports for extra support of the workpiece. Precise ball bearing. (maintenance free) Side stop with 90° angle. Base plate for good support of the tile. Semi-professional tile cutter with extremely strong multi-break system. Cuts and breaks ceramic tiles in 1 operation. Supplied complete with carbide cutting wheel PVC shoe safety "“ Spring loaded bearing surfaces with non-slip foam rubber lining. PVC feet with anti-slip, prevent scratches or marks with existing tiling. Article number 9500 is suitable for all the above variants.

HBM 300mm. Adjustable Combination Snag With Dragonfly

The classic square is and remains a versatile tool. This beautifully finished hook, with a right angle (90°) and a 45° angle, can be moved on the steel ruler and fixed on it in no time (hand nut). This way you can mark measurements that do not necessarily have to be measured from the edge, as is always the case with a normal hook. With this square you can quickly mark both right angles and 45° angles. To complete this square, it is equipped with a vial (tube level - air bubble in liquid). There is also a scriber that is nicely hidden in the hook and can be unscrewed. That makes this combination square also suitable for the metal worker. Thanks to the vial, you can of course check whether something is level, but also whether something is perfectly at an angle of 45°. Useful! Precise combination of die-cast aluminum square with hardened steel ruler. Built-in spirit level with scribe needle. Clear metric and imperial scaling. Precision machined top surface. Knurled set screw. Length: 300mm.

HBM 12 Volt Universal Automotive Relay Tester

A quick test tool for testing automotive relays. Connecting a continuous car battery (12V) to the relay coil allows the detector to check the contact function of the relay. With this handy car relay tester you can test all common 4- and 5-pole car relays. Connect the two terminals to the car battery, Select 4 or 5 pole with the selector switch, Press the test button, If the LED lights up red, a fault has been detected in the relay, If the LED is green, the relay is functioning properly! Pros: No more hassle with a multimeter and loose cables. You don't have to figure out which poles of the relay are the coil first. Suitable for most types of relays used in the automotive industry.

HBM 75 mm digital pocket caliper

(1)

Technical data of the HBM 75 mm Digital Pocket Vernier. MM function, Inch function. This caliper is splash-proof and has a plastic housing. The measuring range of this caliper is 75 mm.

HBM 3 Piece Professional Digital Torque Meter from 10 to 200 NM with 1/2

Have you always planned to purchase a torque wrench, but have you never been able to make a choice from the wide range of torque wrenches? Then this digital torque meter from AOK is the solution! With this digital torque meter you can turn any ratchet (or wrench) into a torque wrench. You place this torque meter between the ratchet and the socket wrench, after which you can read the torque on the clearly legible display. This can be done in Newtonmeter [Nm], but also in many other units of your choice. If you set the desired tightening torque in advance, this torque meter will give a sound signal as soon as you have reached the torque with the ratchet. A red LED will also light up at the same time as the sound signal. So this is much easier to use than the usual "clicks" of a torque wrench. In order not to have to set a desired torque every time, this torque meter has 50 memories in which many torques (torques) you use can be stored, so that you can quickly recall them. This beautiful digital torque meter comes in a sturdy PP case. Technical specifications of the HBM 3-Piece Professional Digital Torque Meter from 10 to 200 NM with 1/2" Recording. The digital torque meter measures with an accuracy of +/- 2% clockwise and +/- 3% counterclockwise. The reading is adjustable in Nm , lb-ft, lf-in and Kg-m. Supplied with 2 adapters from 1/2" to 3/8" and from 1/2" to 1/4" Clear LCD display. Memory for 50 tightening torques. Supplied in sturdy storage case Supplied with 2 x 1.5 Volt batteries.

HBM flexible stainless steel ruler / measuring stick

Measuring range 150 of 300 mm. |Width 12,5 mm. |

HBM analog outside micrometers model 2

Measuring range 0 - 25 mm. |Reading 0,01 mm. |Total length 140 mm. |Measuring range 25 - 50 mm. |Total length 160 mm. |Measuring range 50 - 75 mm. |Total length 180 mm. |Measuring range 75 - 100 mm. |Total length 200 mm. |

HBM 230 mm digital magnetic spirit level

Technical data of the HBM 230 mm Digital Magnetic Level Dimensions 228 x 28.5 x 52 mm. Reading at 0.05 gr Battery 1x AAA Measuring range 0-180 degrees. ( 360 degrees ) 2 individual dragonflies 90 - 180 Gr Magnetic V flat on the bottom

HBM 400 mm digital angle spirit level - swiveling hook

Overall dimensions collapsed 415 x 20 x 50 mm. |Total length extended 780 mm. |

HBM 52 piece thread meter metric / withworth

Technical data of the HBM 52 Piece Metric / Withworth Threadmeter Withworth 55 degrees From 5 to 62 G. Metric 60 degrees From 0.25 to 6.00 mm.

5m x 25mm Anti-Drop Measuring Kit

Ergonomic tape measure including an elastic detachable lanyard. Technical data of the 5m x 25mm Anti-Drop Measuring Kit Measuring range 500 cm Width tape measure 25mm lanyard size 60 cm Weight 0.6 kg Colour yellow Material synthetic Features of the 5m x 25mm Anti-Drop Measuring Kit Magnets in the end hook will stick to all metal surfaces. Including shock-absorbing elastic cord, so you always have the measuring tape at hand. Carabiner is easy to attach to work trousers or belt. Metric reading.

HBM radius meter sets

All our products have a warranty of at least 1 year.

Dasqua professional magnetic blocks

Measuring tools from Dasqua are undisputed of the best quality. Dasqua offers you a huge range of products ranging from micrometers, calipers and dial indicators to altimeters. All Dasqua Articles come with a standard lifetime warranty . For the entire offer, check out our Dasqua section or http://www.dasquatools.com Technical data of the Dasqua Professional Micrometer Standard Suitable for micrometers up to 300 mm. Easy to install due to magnetic V groove. Equipped with an on / off switch for the magnet. Dimensions 80 kg model 60 x 50 x 55 mm. Dimensions 130 kg model 95 x 50 x 55 mm. Thread holder M8.

HBM scratch-off caliper 200 mm

Measuring range 200 mm. |

HBM 22-piece extension pin set for dial gauge

Technical data of the HBM 22-part extension pin set for dial indicator. Thread size M 2.5 x 0.5 Pin length with flat head 4.5, 6.5, 9.5, 12.5, 16, 19, 19, 22, 38 mm. Pin length with convex head 5.5, 9.5, 16, 20.5 mm. Pin length with point head 12.5, 16, 19, 22 mm. Pin length with diluted long shaft 21, 21, 24 mm. Pin lengths with diluted long curved shaft 19 mm. Other specifications. Dial gauge is not supplied with this set. This set is suitable for all HBM dial indicators. (Except for the dial gauge from the set with item no. 3064)