Oil and Lubricants Products
-
AOK professional mini grease gun
Content 80 cc. |
€ 8,95List price€ 11,64In stockDelivery time 1 - 3 business days -
Eurol tectile anti-rust spray 400 ml
Eurol® ML Coating Spray is a spray that contains a solvent-poor wax that offers good protection against corrosion. Eurol® ML Coating Spray has a good water-repellent and penetrating effect. This provides excellent protection against corrosion, making the product ideal for the inside of car doors, hollow spaces in the car, on chrome parts, moldings, chassis beams and moving parts. Features: Rust and corrosion resistant, Water repellent, Silicone free.
€ 8,95List price€ 9,85In stockDelivery time 1 - 3 business days -
Eurol brake cleaner - 500 ml
EUROL BRAKECLEANER SPRAY 500ml. Eurol Brake Cleaner Spray: is a powerful fast-drying non-corrosive cleaner for brake and clutch parts, as well as other materials that must be degreased. Quickly removes excess brake fluid, dirt, grease and oil residues from brakes and clutch parts and leaves no residue. Prevents squeaking brakes. Thanks to the handy packaging, Eurol Brake Cleaner Spray can be used at all angles. Cannot be used on rubber, plastics, or painted parts without first trying it out. Shake the can well before each use, at least 10 seconds. Use sufficient product on the parts to be cleaned and let it soak in for a few seconds. If necessary, then wipe it clean with an absorbent cloth. In the case of increased carbon pollution, repeat the steps. Use only outdoors or in a well-ventilated area. In the event of contact with eyes, rinse immediately with plenty of water. Flammable. Eurol Brake Cleaner Spray has a shelf life of 3 years in a cool and dry area with a minimum temperature of + 5 ° C and a maximum of + 25 ° C. SPECIFIC VALUES: Flash point: -12 ° C
€ 2,95List price€ 4,13In stockDelivery time 1 - 3 business days -
HBM gearbox oil
Top Quality HBM Gearbox oil.
€ 6,89In stockDelivery time 1 - 3 business days -
Eurol cold degreaser hf plus 20 liters
(1)
Eurol® Cold Degreaser HF Plus 20 Liter is a strong cleaning agent with a low evaporation loss. It is an economical and biodegradable product with a pleasant smell. The pH is neutral making it suitable for all surfaces. The flash point is higher than 61 degrees, making it not ADR classified. Eurol® Cold Degreaser HF Plus 20 Liters is ideal for de-preserving new cars, cleaning engine parts, filters, machines, engine rooms, tanks, lift bridges, floors, etc. It is also suitable for cleaning greasy floors and walls. Plastics and rubbers are not affected during the short contact time. No greasy layer remains after rinsing with water. Advantages of Eurol® Cold Degreaser HF Plus 20 Liter: Powerful and economical in use Low evaporation loss Pleasant smell Suitable for all surfaces Not ADR classified Biodegradable
€ 119,95List price€ 155,94In stockDelivery time 1 - 3 business days -
Arnold Motor oil sae 10w/30 1 ltr
Specifications: Item number: 6012-X1-0034 Barcode: 4008423828382 Brand: ARNOLD Net weight (kg): 0.96
€ 13,95List price€ 16,74In stockDelivery time 1 - 3 business days -
Eurol universal lithium grease ep2 - 400gr
Eurol Universal Lithium Grease 400G Eurol Universal Grease is a multi-purpose grease that consists largely of lithium. The agent is used, among other things, for the lubrication of heavily loaded parts and mechanisms.
€ 6,95List price€ 8,34In stockDelivery time 1 - 3 business days -
HBM oil sprayer model 1
Color Rood. |Content 350 ML. |Neck length 140 mm. |
€ 3,95List price€ 4,74Almost sold out!Delivery time 1 - 3 business days -
WD-40 multi spray 100ml
Technical data of the WD-40 Multispray 100ml. If it beeps, crackles, is stuck, or rusts then WD-40! WD-40 means five products in one, because WD-40 works simultaneously as. - rust remover - lubricant - contact spray - cleaner - corrosion prevention Tools are protected against corrosion, squeaky and creaking parts are moved again. Moisture is kept away from switch cabinets and electronic measuring equipment. Contacts are cleaned and stubborn dirt such as oil, grease and resin residues is loosened .... and much more! The advantage of WD 40 is that the performance of the product allows you to forego other expensive specialized products. Other specifications. Lubricates door hinges and frees you from squeaking noises. Repels moisture from electrical connections. Lubricates and protects lock cylinders and keeps them flexible. Removes stubborn glue residues from price labels. Crawls under rust layers and protects against corrosion.
€ 4,95List price€ 5,45Almost sold out!Delivery time 1 - 3 business days -
HBM 4-piece funnel set
Plastic funnels for fast fluid transfer. The set contains a 50, 75, 100 and 125 mm funnel.
€ 1,95List price€ 2,63In stockDelivery time 1 - 3 business days -
HBM grease gun with 120cc oil can
Do you want to maintain your machines optimally? Then you need the HBM Grease Gun with 120cc Oil Can! This grease gun contains everything you need to keep your machines running smoothly. Technical data of the HBM Grease Gun with 120cc Oil Can: 1 x Rigid lubrication tube 15 cm. 1 x Rigid lubrication tube 12.5 cm. 1 x Flexible lubrication hose 20 cm. 1 x Connection coupler. 1 x Grease cartridge ( 35 x 150 mm. ) 1 x 120cc. Oil can with 14 cm flexible hose. 1 x Grease gun. 1 x 85 Gram Grease cartridge. With this set you have everything you need to keep your machines running smoothly. Whether you're a professional machinist or a do-it-yourselfer, this grease gun is a must have in your toolbox! The HBM brand HBM is a brand that focuses on the professional market and is known for its high-quality tools and machines. The brand was founded in 1979 and has since built a good reputation in the industry. The HBM Grease Gun with 120cc Oil Can is a good example of the quality you can expect from this brand.
€ 11,95List price€ 16,13In stockDelivery time 1 - 3 business days -
HBM professional manual gasoline, diesel, oil and liquid pump
The HBM Professional Manual Petrol, Diesel, Oil and Liquid Pump is a versatile pump that can be used to fill or remove various types of liquids such as petrol, diesel, oil and more. With a capacity of 1.5 liters, this pump can easily handle large tasks. Technical data Content: 1.5 liters Material: Transparent composite/plastic Cap to avoid spillage Not suitable for brake fluid The transparent composite/plastic body allows easy viewing of pump contents and protects the cap from spillage. Keep in mind that the pump is not suitable for working with brake fluid. With the HBM Professional Manual Gasoline, Diesel, Oil and Liquid Pump you are assured of a reliable and versatile solution for working with different types of liquids.
€ 29,95List price€ 35,94In stockDelivery time 1 - 3 business days -
HBM precision oil sprayer
(1)
Total length 143 mm. |
€ 6,95List price€ 9,04In stockDelivery time 1 - 3 business days -
Eurol cold degreaser hf plus 5 liters
Are you looking for a powerful degreaser for fast and effective cleaning of machines, engine parts, filters, lift bridges, tanks, floors and walls? Then Eurol Cold Degreaser HF Plus is the perfect solution. This Eurol product is composed of highly effective emulsifiers and hydrocarbon solvents, which gives it an excellent degreasing effect and is suitable for many applications. Below you will find more information about the technical data and benefits of Eurol Cold Degreaser HF Plus: Technical Data of Eurol Cold Degreaser HF Plus Brand: Eurol Type: Cold Degreaser HF Plus Contents: 5 Liters Composition: Strong emulsifiers and hydrocarbon solvents with a low evaporation loss Applications: For the quick deconservation of new cars, cleaning of engine parts, filters, machines, engine rooms, tanks, lift bridges, floors, etc. Advantages: Suitable for all surfaces, has a pleasant smell, is economical in use, biodegradable and has a relatively low evaporation rate Eurol Cold Degreaser HF Plus is a multifunctional degreaser that is suitable for many applications. The product should be used pure and has a pleasant smell, which makes its use even more pleasant. Moreover, Eurol Cold Degreaser HF Plus is economical in use and the cleaned parts can easily be rinsed with water. Plastics and rubbers are not affected during the short contact time, which makes the product suitable for many surfaces. Eurol Cold Degreaser HF Plus has a pH-neutral formula and is therefore suitable for all surfaces. In addition, the product evaporates relatively slowly and is biodegradable. The flash point is higher than 61 degrees, which means that Eurol Cold Degreaser HF Plus is not ADR-classified. This means that there are no stricter storage requirements for this product with regard to the PGS-15 successor to the CRP 15 guideline for the storage of dangerous goods. In short, with Eurol Cold Degreaser HF Plus 5 Liter you have a powerful degreaser that is suitable for many applications and is safe to use. Order this product today and take advantage of the many benefits that Eurol Cold Degreaser HF Plus has to offer!
€ 39,95List price€ 53,93In stockDelivery time 1 - 3 business days -
Beta 9724 - PTFE grease PFTE grease -30 - 220 Degrees
Lubricating grease mixed with PTFE. Extremely useful for lubricating industrial chain and mechanical moving parts that are subject to friction and low rotational speeds. Also suitable for hinges, locks, drawer slides, access gates and application on plastic and rubber. Completely colorless. Water repellent and resistant to corrosion. Highly resistant to cold and heat (-30 °C to +220 °C). INSTRUCTIONS FOR USE: Shake before use. Only treat clean surfaces. Apply the product at a spray distance of 10 cm.
€ 7,95List price€ 10,34In stockDelivery time 1 - 3 business days -
Kroon Oil ball bearing grease
Ball bearing grease is based on well-refined base oils with a lithium soap as thickener, to which additives have been added to obtain the following properties: • Strong adhesion to metal • Excellent water displacement • Very good stability • Good anti-corrosion and anti-wear effect • Very good pumpability Applications: Ball bearing grease is used for the lubrication of small to medium-sized ball bearings in the most varied machines.
€ 3,95List price€ 5,53Almost sold out!Delivery time 1 - 3 business days -
Eurol molybdenum disulphide 600gr
Eurol Molybdenum Disulphide is a multifunctional lubricating grease for various mechanical applications. The agent is recommended for the lubrication of, among other things: plain bearings Chassis parts Earthmoving machines This lubricating grease from Eurol is not only water resistant, but also offers resistance to corrosion, oxidation and other wear processes. In addition, it has an unprecedented mechanical stability that promotes the life of the treated part. With Eurol Molybdenum Disulphide, machines and parts remain in top condition for longer and you can continue your work without any problems.
€ 12,95List price€ 15,54In stockDelivery time 1 - 3 business days -
WD-40 lock spray 100 ml
The WD-40 locking cylinder spray has a silicone and grease-free formula and a high capillary effect. Together they ensure that the spray can penetrate into the cylinder mechanism and release blockages, without thereby hardening.
€ 6,95List price€ 9,38In stockDelivery time 1 - 3 business days -
Eurol brake fluid dot 4 1l
Eurol® Brake Fluid DOT 4 LV is recommended in ABS, ESP and ASR brake systems. Especially the low viscosity compared to the classic DOT 4 brake fluids comes into their own particularly well in these systems. Eurol® Brake Fluid DOT 4 LV is particularly suitable and also prescribed in new braking systems (such as in Opel Vectra C, VW Passat B6, and also other modern cars after 2004). These new brake systems are characterized by, among other things, thin brake lines (more flexible, less material) and these brake systems require a brake fluid with a lower viscosity at low temperatures in order to ensure a fast and timely operation. Eurol® DOT 4 LV has a high wet boiling point, which considerably reduces the risk of vapor formation in the braking system. This is important for the use of asbestos-free brake linings, as well as for frequent braking (eg in the mountains and / or with a trailer) and the associated greater heat development. Eurol® DOT 4 LV can be mixed with other synthetic brake fluids that meet the standards of FMVSS 116 DOT 3, DOT 4 and DOT 5.1 and can be used in systems where these specifications are prescribed. Eurol® DOT 4 LV is not aggressive with respect to cuffs, brake hoses or sealing rings.
€ 9,95List price€ 13,43In stockDelivery time 1 - 3 business days -
Euroboor cooling lubricant water soluble for all materials 1 liter
The Euroboor Cooling Lubricant is a universal water-soluble drilling oil that is suitable for all materials. This product has been specially designed to be used with automatic dosing systems and is therefore very easy to use. Does not contain chlorine and phosphorus Environmentally friendly Low consumption and no harmful fog Suitable for all materials Thanks to the water-soluble properties of this coolant, it is very easy to use and remove. The average mixing ratio of this product to water is 1:20, which means that only a small amount of this product is needed to provide adequate cooling. The Euroboor Cooling Lubricant is available in a handy 1 liter bottle, so you have enough coolant to use several times. In addition, this product is available in different quantities so that you can choose the right amount to suit your specific need. If you are looking for a reliable, efficient and cost-effective way to cool your drilling processes, the Euro Drill Cooling Lubricant Water Soluble For All Materials 1 Liter is the best choice for you.
€ 17,95List price€ 19,75In stockDelivery time 1 - 3 business days -
HBM grease gun scissors model
The HBM Grease Gun Scissor Model, from the brand HBM, is the ideal grease gun for tough grease or heavy back pressure. This should include resinous lubrication points. Even with a small opening of the hand lever, the grease is reliably sucked in and transferred to the head of the grease gun. This makes it possible to lubricate hard-to-reach places. Characteristics: Suitable for tough grease or heavy back pressure Trustworthy Easy to use For grease cartridges with a capacity of 400 CC Includes flexible grease gun hose The grease gun is supplied with a flexible grease gun hose and is suitable for grease cartridges with a capacity of up to 400 CC. With this grease gun, lubricating even the most difficult to access places is no longer a problem.
€ 8,95List price€ 9,85In stockDelivery time 1 - 3 business days -
Hazet pneumatic oil 100 ml - 9400-100
Hazet Pneumatic Oil 100 ml - 9400-100: Improve the performance of your motor-driven pneumatic tools with Hazet's silicone-free special oil. With a capacity of 100 ml and a handy spout for direct use, this oil is ideal for daily use. In addition, it reduces wear on the air motor, extending the life of your tools. Most important features: - Reduces wear on the air motor - Application for pneumatic tools such as impact wrenches and grinders - Silicone-free special oil - Guarantees top performance in daily use - Content 100 ml - Handy spout for direct use with shut-off valve Get your pneumatic tools ready for peak performance with Hazet Pneumatic Oil. Order today and enjoy the benefits of this special oil from Hazet.
€ 12,95List price€ 18,13In stockDelivery time 1 - 3 business days -
crown white petroleum jelly 60 gr.
White Vaseline is a very pure fat due to refined petrolatum. A specially developed refining process (in accordance with FDA guidelines) creates a snow-white White Vaseline. The following unique properties are thereby obtained: White Vaseline is completely white color. White Vaseline is completely odorless and tasteless. White Vaseline has a nice wire-like structure. White Vaseline is absolutely acid-free, so it is not aggressive towards seals and metals. Application Due to its high refining degree, white Vaseline is extremely suitable for the manufacture of ointments, creams and other medical and cosmetic products. Vaseline can also be used as an insulating agent and as a preservative and lubricant in the food sector.
€ 3,95List price€ 5,14In stockDelivery time 1 - 3 business days -
Eurol orangestar hand cleaner 4 liters
Eurol Hand Cleaner Orangestar is a solvent-free, high-quality hand cleaner that also cares for the hands. Its pH neutral character prevents skin irritation. The hand cleaner is formulated on the basis of natural citrus oil and contains an environmentally friendly abrasive (based on plastics). Eurol Hand Cleaner Orangestar is dermatologically neutral and is also biodegradable. Characteristics Solvent-free pH neutral Natural citrus oil Environmentally friendly abrasive Dermatologically neutral Biodegradable Eurol Hand Cleaner Orangestar is extremely suitable for removing mild to heavy soiling and is applied dry to the hands. The dirt is loosened by rubbing, after which it can be removed by rinsing with water or a dry cloth. STORAGE FREE OF FROST.
€ 30,95List price€ 43,33In stockDelivery time 1 - 3 business days -
Eurol cold degreaser power cleaner bio 2000 - good for 50 liters!
With the Eurol Cold Degreaser Power Cleaner Bio 2000 you have a highly concentrated cleaning agent with a very high cleaning power for a wide range of applications. It is suitable for cleaning hard surfaces such as metal, paint, plastic and more. This product is from the Eurol brand and contains no less than 50 liters of cleaning power. Features and benefits Handy and robust spray bottle with infinitely adjustable spray head Suitable for motorcycles, engines, engine compartments, racing, cross and touring bikes, walls, floors, ship decks, garden furniture and caravans Ideal for cleaning hard to reach parts Contains undiluted product, use only after application on hard surfaces. Avoid eye and skin contact with the pure product! Can be mixed with both cold and warm water, depending on the pollution, a dosage of 1:400 to 1:10 is recommended Meets the highest environmental requirements, is readily biodegradable and non-toxic Phosphate-free, and depending on the contamination can also be used undiluted Water-thin non-flammable liquid Even more applications are possible because Eurol® Power Cleaner Bio 2000 is supplied in bulk packaging. For example, you can clean freight and passenger cars, buses, trams, ships, metros and railway wagons. Warm water is recommended for heavily soiled parts, especially for heavy algae deposits. This powerful cleaning agent is the ultimate tool in your cleaning crate. Order the Eurol Cold Degreaser Power Cleaner Bio 2000 now and make your living environment as new again.
€ 49,95List price€ 59,94In stockDelivery time 1 - 3 business days -
Eurol molybdenum disulphide 400gr
Eurol Molybdenum Disulphide 400G Eurol Molybdenum Disulphide is a multifunctional lubricating grease for various mechanical applications. The agent is recommended for the lubrication of, among other things, plain bearings, chassis parts and earth-moving machines. The agent is water resistant and also offers resistance to corrosion, oxidation and other wear processes. In addition, Eurol Molybdenum Disulphide has unprecedented mechanical stability that promotes the service life of the treated part!
€ 7,95List price€ 8,75In stockDelivery time 1 - 3 business days -
Eurol copper grease 100gr
Eurol Copper Grease 100G Eurol Copper Grease is an advanced type of fat, largely made up of copper particles. The agent is used for the lubrication of, among other things, wheel nuts, battery clamps, threaded ends and brake pads. Eurol Copper Grease is extremely resistant to high temperatures, high loads and corrosion. It also ensures that irregularities of the treated surface are filled.
€ 7,95List price€ 9,54In stockDelivery time 1 - 3 business days -
Eurol copper grease 600gr
Eurol Copper Grease is an advanced lubricant from the Eurol brand that mainly consists of copper particles. The lubricant has been developed for lubricating wheel nuts, battery clamps, threaded ends and brake pads, among other things. In addition, the agent is ideal for use at high temperatures, high loads and corrosion. It also ensures that irregularities of the treated surface are filled. Characteristics Advanced lubricant based on copper particles Ideal for lubricating wheel nuts, battery clamps, threaded ends and brake pads, among other things Resistant to high temperatures, high loads and corrosion Fills irregularities of the treated surface Content: 600 grams Give your vehicle the right protection and maintenance with Eurol Copper Grease!
€ 18,95List price€ 20,85In stockDelivery time 1 - 3 business days -
Euroboor cooling lubricant for stainless steel, chrome, nickel metals 1 liter
Active cutting oil of medium viscosity High cutting speeds and extends tool life at high speeds Recommended cutting oil for high-alloy steels such as stainless steel and chrome/nickel Not suitable for non-ferrous metals Chin. viscosity D 445, 40ËšC, mm2/s 28.2 Available in different quantities The Euroboor Cooling Lubricant is a chlorine-free, active cutting oil with a medium viscosity. This cutting oil is specially designed to allow high cutting speeds and extend tool life at high speeds. This makes it the ideal choice for high-alloy steels such as stainless steel and chrome/nickel. Please note that this cutting oil is not suitable for non-ferrous metals. The kinematic viscosity at 40°C, measured according to D 445, is 28.2 mm2/s. The Euroboor Cooling Lubricant is available in different quantities. Choose the Euroboor Cooling Lubricant if you are looking for a high-quality cutting oil that extends the tool life at high speeds and allows high cutting speeds.
€ 14,95List price€ 17,94In stockDelivery time 1 - 3 business days -
WD-40 Multispray smart 300ml
(1)
This spray stops squeaking and cracking, expels moisture, cleans and protects. The WD-40 multi spray loosens what is stuck, makes stiff parts common again. Special characteristics User friendly Provides lubrication to keep devices running smoothly Multi Use product Applicable: between -50 ° C and 150 ° C Specifications: Item number: WD312586 Barcode: 5032227312586 Brand: WD40 Net weight (kg): 0.36
€ 13,95List price€ 18,83In stockDelivery time 1 - 3 business days