Pully tractors and Pullytrekker sets Products
-
HBM 14 Piece Professional 3 Arm Puller Puller Set 105, 210, 265 mm
Technical data of the HBM 14 Piece Professional 3 Arm Puller Puller Set 105, 210, 265 mm. Length of arms 105 - 210 - 265 mm. Maximum reach Up to 135 mm. Dimensions of the legs Width x Depth 25 x 4 mm. Length of the spindles 165 - 280 mm. Thread of the spindles M14x1.5. Other specifications. Supplied in a handy sturdy storage case. Professional quality.
€ 102,95List price€ 133,84In stockDelivery time 1 - 3 business days -
HBM 14-piece bearing puller set
Range Van 10 tot 100 mm lagerdiameter, maximale ashoogte 30 cm. |
€ 51,95List price€ 72,73In stockDelivery time 1 - 3 business days -
HBM 17-piece inner bearing puller set 8 - 58 mm.
Intended for disassembling bearings installed in a blind hole. Used when repairing car transmissions. 2-claw trigger with spindle. Spreader sleeves for bearings with an inner diameter of 8-58 mm. Technical data of the HBM 17-piece inner bearing puller set 8 - 58 mm. Length of the hammer 290 mm.
€ 59,95List price€ 77,94In stockDelivery time 1 - 3 business days -
HBM 2 arm crv pulley puller
Range Van 15 tot 80 mm. |Range Van 20 tot 110 mm. |Range Van 25 tot 160 mm. |
€ 8,95In stockDelivery time 1 - 3 business days -
HBM 2 arm professional pulley tractor
Top quality forged steel pulley pullers. Very nice jaws for perfect grip. Reversible jaws.
€ 22,95In stockDelivery time 1 - 3 business days -
HBM 23 Piece Alternator Pully Removal Kit and Assembly Kit, Repair Kit
The HBM 23 Piece Alternator Pully Removal Set and Assembly Set, Repair Set consists of. 1 x T50 T-profile Bit socket with 1/2 "connection, 33T x 110 mm. Suitable for the Mercedes, A-Class. 1 x M10 Spline Bit sockets with 1/2" connection, of 33T x 110mm. Suitable for BMW, Ford, Mercedes, VAG); 1 x M10 Spine Bit Socket with 1/2" connection 31T x 98 mm. Suitable for Fiat. 1 x M10 Spine Bit Socket with 1/2" connection 11. mm. With universal fit. 1 x T50 T-profile bit x 75 mm. With universal fit. 1 x T40 T-profile bit x 75 mm. With universal fit. 1 x M8 internal teeth XZN Bit x 75 mm. With universal fit. 1 x M10 internal teeth XZN Bit x 75mm. Suitable for Renault. 1 x 10mm internal teeth XZN Bit x 75mm. With universal fit. 1 x 8mm Internal Teeth XZN Bit x 75mm. With universal fit. 1 x M10 spline bit 14mm HEX x 57mm. Suitable for Renault, BMW, Ford, Mercedes, Porsche, Opel, VAG. 1 x 33T x 22mm. Suitable for Renault, Mercedes. 1 x 33T x 17mm. With universal fit. 1 x 19mm. Bit with universal fit. 1 x 22mm. Bit with universal fit. 1 x 21mm Bit Suitable for Renault, BMW, Ford, Mercedes, Porsche, Opel, VAG. 1 x 4 Pin dynamo bit with universal fit. 1 x 33T x 15mm. Bit suitable for Ford. 1 x 17mm. Bit suitable for Ford. 1 x 38mm Bit with 3-pin connector suitable for Toyota. 1 x H28 x H22mm. Bit suitable for Porche. 1 x Adapter for 10 mm bits to 1/2" connection with universal fit.
€ 32,95List price€ 44,48In stockDelivery time 1 - 3 business days -
HBM 23-piece hydraulic pulley puller set and bearing puller set
Top quality forged CRV steel pulley pullers. Very nice pelvis for perfect grip. Technical data of the HBM 23 Piece Hydraulic Pulley Puller Set and Bearing Puller Set. Capacity: 100 - 150 - 200 mm. Maximum capacity: 10 Ton.
€ 151,95List price€ 182,34Almost sold out!Delivery time 1 - 3 business days -
HBM 3 arm crv pulley pullers
Range Van 15 tot 80 mm. |Range Van 20 tot 110 mm. |Range Van 25 tot 160 mm. |
€ 8,95In stockDelivery time 1 - 3 business days -
HBM 3-piece internal and external pulley puller set
Top quality forged CRV steel pulley pullers. Very nice pelvis for perfect grip. Technical data of the HBM 3-part Internal and External Pulley trigger set. Within reach Pulley puller 1: From 15 to 30 mm. Pulley puller 2: From 30 to 80 mm. Out of range Pulley puller 3: From 15 to 80 mm. Packaging dimensions cm. Weight Kg. The HBM 3-Piece Internal and External Pulley Puller Kit is supplied as standard. 1 Stroke trigger. 3 Interchangeable pulley tractors. Nice steel storage case.
€ 49,95List price€ 64,94In stockDelivery time 1 - 3 business days -
HBM 72 piece 2 and 3 arm pulley puller set 75/100/150/200 mm.
Range Van 75 tot 200 mm. |
€ 100,95List price€ 131,24In stockDelivery time 1 - 3 business days -
HBM Professional 10 Ton Hydraulic Puller Puller
The HBM Professional 10 ton hydraulic pulley puller can be operated with a separate hydraulic hand pump. Can be used as 2 and 3 claws and comes in a handy storage case. Technical data of the HBM Professional 10 ton hydraulic pulley puller Max power 10 T Max stroke 50mm Max diameter 250mm
€ 81,95List price€ 98,34In stockDelivery time 1 - 3 business days -
HBM Professional 5 Ton Hydraulic Puller Puller
The HBM Professional 5 ton hydraulic pulley puller can be operated with a separate hydraulic hand pump. Can be used as 2 and 3 claws and comes in a handy storage case. Technical data of the HBM Professional 5 ton hydraulic pulley puller Max power 5 T Max stroke 50mm Max diameter 200mm
€ 51,95List price€ 62,34In stockDelivery time 1 - 3 business days -
HBM profi 17-piece inner bearing puller set 8 - 58mm.
Intended for disassembling bearings installed in a blind hole. Used when repairing car transmissions. 2-claw trigger with spindle. Spreader sleeves for bearings with an inner diameter of 8-58 mm. Technical data of the HBM Profi 17 Piece Inner Bearing Puller Set 8 - 58mm Length of the hammer 290 mm Other specifications. Delivered in sturdy storage case and Foam inlay.
€ 92,95List price€ 130,13In stockDelivery time 1 - 3 business days -
HBM profi 2 claw external bearing and pulley puller
All our products have a warranty of at least 1 year.
€ 7,95In stockDelivery time 1 - 3 business days -
HBM profi 3 claw internal bearing and pulley puller 15 to 38 mm
Range Van 16 t/m 38 mm. |
€ 16,95List price€ 23,73In stockDelivery time 1 - 3 business days -
HBM sliding hammer
Professional heavy duty pulley puller - impact puller - sliding hammer, for internal and external pulling with 2 or 3 hooks, as a stub axle puller, wheel hub puller, brake drum puller. Professional Heavy quality!
€ 69,95List price€ 94,43In stockDelivery time 1 - 3 business days -
HBM universal timing pulley puller adjustable from 42 to 82 mm
This universal timing pulley puller is ideal for removing pulleys and camshaft teeth without causing damage. Thanks to the adjustable gripping arms, this tool is adjustable for different pulley diameters. The timing pulley puller is made of high-quality carbon steel to guarantee robustness and durability. Gripping arms are connected to each other and can easily be adjusted Technical data of the HBM Universal timing pulley puller adjustable From 42 to 82 mm. Dimensions coil drive (hexagonal) 19 mm. Depth of gripping arm 27 mm. Grab arms are adjustable From 42 to 82 mm. Gripping arms are suitable for a material thickness up to 10 mm. The HBM Universal timing pulley puller adjustable From 42 to 82 mm. consists of: 1 x Pull plate with adjustable disc, 6 grooves. 1 x Rinse with centering ball. (M14 x 1.5 mm) 3 x Grab arm. (M10 x 1.5 mm; 12 mm in diameter)
€ 25,95List price€ 28,55In stockDelivery time 1 - 3 business days -
Mannesmann pulley puller set 3 parts 75 - 150 mm. - 291-3
Technical data of the Mannesmann Pulley Puller Set 3 Piece 75 - 150 mm. - 291-3. The 3-part Mannesmann poetry trigger set is of real German quality. This set is extremely suitable for both the do-it-yourselfer and the professional. With this set you can, for example, expand your bearings or seals, but you will certainly also get your flywheel loose. The pulley pullers are chromed, so that they have a very good quality. Even after frequent use, this 3-part set from Mannesmann is excellent. The set consists of a 2-arm pulley puller with a clamping depth of 75 mm, for the fine job. A 3-armed pulley puller with a clamping depth of 100 mm and a 3-armed pulley puller of 150 mm, for the big job! With this purchase you therefore have the right pulley pullers. In short, this set cannot be missing in your garage or workshop!
€ 19,95List price€ 23,94In stockDelivery time 1 - 3 business days -
neo pulley puller 100mm 4'-100mm
NEO two arm gear puller is made of high quality chromium vanadium steel that guarantees years of use. It is designed for disassembly of parts installed coaxially. It features special profiled gripping ends to protect separated parts against damage. TUV Rheinland certificate guarantees high quality and reliability of the product. NEO brand meets expectations of professionals.
€ 13,95List price€ 15,35In stockDelivery time 1 - 3 business days -
neo pulley puller 125mm 5'-125mm
NEO two arm gear puller is made of high quality chromium vanadium steel that guarantees years of use. It is designed for disassembly of parts installed coaxially. It features special profiled gripping ends to protect separated parts against damage. TUV Rheinland certificate guarantees high quality and reliability of the product. NEO brand meets expectations of professionals.
€ 20,95List price€ 27,24In stockDelivery time 1 - 3 business days -
neo pulley puller 2 arm 0 '25mm
NEO 1" two arm mini gear puller is made of high quality chromium vanadium steel that guarantees years of use. Sized 1". Designed to remove small bearings. It is equipped with arms ended with hooks on one end and a turning pin. NEO brand meets expectations of professionals.
€ 10,95List price€ 15,33In stockDelivery time 1 - 3 business days -
neo pulley puller 2 arm 1 '50mm
NEO 1" two arm mini gear puller is made of high quality chromium vanadium steel that guarantees years of use. Sized 1". Designed to remove small bearings. It is equipped with arms ended with hooks on one end and a turning pin. NEO brand meets expectations of professionals.
€ 12,95List price€ 16,84In stockDelivery time 1 - 3 business days -
neo pulley puller 2 arm 100mm 100mm
NEO two arm gear puller is made of high quality chromium vanadium steel that guarantees years of use. Sized 85 x 100 mm. Designed for disassembly of bearings, fans, brake discs etc. Equipped with arms with adjustable spread thanks to guides. NEO brand meets expectations of professionals.
€ 15,95List price€ 17,55In stockDelivery time 1 - 3 business days -
neo pulley puller 2 arm 110m 110mm
NEO two arm gear puller is made of high quality chromium vanadium steel that guarantees years of use. Sized 85 x 100 mm. Designed for disassembly of bearings, fans, brake discs etc. Equipped with arms with adjustable spread thanks to guides. NEO brand meets expectations of professionals.
€ 17,95List price€ 21,54In stockDelivery time 1 - 3 business days -
neo pulley puller 2 arm 140mm 140mm
NEO two arm gear puller is made of high quality chromium vanadium steel that guarantees years of use. Sized 85 x 100 mm. Designed for disassembly of bearings, fans, brake discs etc. Equipped with arms with adjustable spread thanks to guides. NEO brand meets expectations of professionals.
€ 24,95List price€ 32,44In stockDelivery time 1 - 3 business days -
neo pulley puller 2 arm 2 '75mm
NEO 1" two arm mini gear puller is made of high quality chromium vanadium steel that guarantees years of use. Sized 1". Designed to remove small bearings. It is equipped with arms ended with hooks on one end and a turning pin. NEO brand meets expectations of professionals.
€ 13,95List price€ 15,35In stockDelivery time 1 - 3 business days -
neo pulley puller 3 arm 150mm 6'-150mm
NEO three arm gear puller is made of high quality chromium vanadium steel that guarantees years of use. It is designed for disassembly of parts installed coaxially. It features special profiled gripping ends to protect separated parts against damage. TUV Rheinland certificate guarantees high quality and reliability of the product. NEO brand meets expectations of professionals.
€ 29,95List price€ 40,43In stockDelivery time 1 - 3 business days -
neo pulley puller 3 arm 2 '50mm
NEO 1" three arm gear puller is made of high quality chromium vanadium steel that guarantees years of use. Sized 1". Primarily designed for bearing removal. It is equipped with arms ended with hooks on one end and a turning pin. NEO brand meets expectations of professionals.
€ 16,95List price€ 23,73In stockDelivery time 1 - 3 business days -
neo pulley puller 3 arm 60-200mm 4'-100mm
NEO reinforced three arm gear puller is made of high quality chromium vanadium steel that guarantees years of use. With special reinforced arms design. It is designed for disassembly of coaxial, hard fit parts. It features special profiled gripping ends to protect separated parts against damage. TUV Rheinland certificate guarantees high quality and reliability of the product. NEO brand meets expectations of professionals.
€ 26,95List price€ 37,73In stockDelivery time 1 - 3 business days -
neo pulley puller 3 arm 80-300mm 6'-150mm
NEO reinforced three arm gear puller is made of high quality chromium vanadium steel that guarantees years of use. With special reinforced arms design. It is designed for disassembly of coaxial, hard fit parts. It features special profiled gripping ends to protect separated parts against damage. TUV Rheinland certificate guarantees high quality and reliability of the product. NEO brand meets expectations of professionals.
€ 50,95List price€ 66,24In stockDelivery time 1 - 3 business days