HBM column drilling machines Products

HBM 13 mm Professional Variable Precision Pillar Drilling Machine with Laser and Digital Readout

This is the ideal drill string for the modeller, the mobile handyman and the young apprentice! This drill press is not only beautiful to look at, but has a well-considered design in all respects. This drill press has the following very favorable properties: The machine is light and therefore easy to move on any table. A digital readout of the drilling depth and spindle speed The drilling depth has a zero setting on the control panel Very ergonomic handles are pleasant to work with The height adjustment of the motor housing is smooth and easy to adjust with a crank. The powerled workpiece lighting can be switched on and off via the front panel. A cross laser (2 line lasers) indicates where to drill. The spindle is equipped with a quick-release chuck with 1.5 - 13 mm mounting. The spindle is equipped with an adjustable mechanical drilling depth stop. A machine clamp for mounting on the aluminum base is included. The machine is equipped with a two-stage reduction gear. The speed can be varied electronically from the front. The machine always starts at the lowest speed and must then be brought to the desired speed from the control panel. This is a safety consideration, which also makes the machine suitable for the less experienced user (schools). Depending on the gear reduction position, the speed that can be achieved is adjustable from 100 to 870 rpm or from 220 to 2500 rpm. These features make this machine a tool well suited to the precision work of the modeller, safe enough for the young apprentice (schools), and powerful enough for the professional looking for a light drill string to take to the job. , with which you can look good. Technical data of the HBM 13 mm Professional Variable Precision Pillar Drilling Machine with Laser and Digital Readout Voltage 230V/50Hz Wattage 720 Watt Max recording 13mm Motor Speed 22,700 min drilling depth 80mm spindle 80mm foot size 340 x 300mm Column diameter 46mm Machine height 650mm Weight 8.7 kg The HBM 13 mm Professional Variable Precision Column Drilling Machine with Laser and Digital Readout is supplied incl. drill clamp Drill chuck up to 13 mm (quick clamping) Manual

Scheppach Bench drill DP55

For all precision DIYers with a small workshop, the Scheppach DP55 drill is the right choice, with a digital display for precise speed setting. The drill is quickly clamped in a few simple steps and the workpiece can also be secured in a few seconds with the quick-release clamp. An integrated laser ensures precise drilling in steel and wood. Precise speed setting from 500 - 2600 rpm via digital display Fast clamping of the drill in the precision chuck Integrated laser for precise drilling Quick-release clamp for fixing the workpieces Powerful 710 W motor 260 mm distance between the clamp and the table Clamping range from 1.5 to 13 mm for maximum drill holes of 13 mm in steel and 40 mm in wood. Stable mounting plate 320 x 305 mm Specifications: Item number: 5906822901 Barcode: 4046664094913 Brand: SCHEPPACH Net weight (kg): 0 Cooling integrated: Yes Digital Pinole Stroke Display: Yes Digital speed readout: Yes Height: 675mm Length: 380mm Max. drill diameter: 13 mm Max. load speed 1st position: 2600 1/min Max. load speed 2nd position: 2600 1/min Max. load speed 3rd position: 2600 1/min Max. load speed 4th position: 2600 1/min nom. power consumption: 710 W Speed: 500 - 2600 rpm Infinitely adjustable: No Stroke: 70mm Suitable for metal: Yes Suitable for wood: Yes Total height: 675 mm Type: Table System Type: Quick Clamp Voltage: 240 V Width: 250mm Frame included: No With digital readout: Yes Presentation document/presentation file: Instruction manual:

HBM 25 mm. professional column drill floor model - 230 volts

Maximum drilling capacity in steel 25 mm. |Engine power 750 Watt / 1 Pk. |Speed ??range Van 220 tot 2380 O/min. |Spindle stroke 82 mm. |Recording MC3 |Dimensions of the work table 290 x 290 mm. |Diameter of the T-Slots 16 mm. |Dimensions of the work table of the foot 200 x 200 mm. |Dimensions of the entire foot 265 x 450 mm. |Diameter of the column 80 mm. |Maximum distance spindle / Table 575 mm. |Maximum distance spindle / foot 1065 mm. |Total height 1560 mm. |Unloading 180 mm. |Voltage 230 Volt. |

HBM 25 mm. professional drill press with digital depth readout

Maximum drilling capacity in steel 25 mm. |Engine power 750 Watt / 1 Pk. |Speed ??range Van 220 tot 2840 O/min. |Spindle stroke 82 mm. |Recording MC2 |Dimensions of the work table 305 x 305 mm. |Diameter of the T-Slots 16 mm. |Dimensions of the work table of the foot 185 x 200 mm. |Dimensions of the entire foot 270 x 465 mm. |Diameter of the column 72 mm. |Maximum distance spindle / Table 305 mm. |Maximum distance spindle / foot 490 mm. |Total height 980 mm. |Unloading 180 mm. |Voltage 230 Volt. |

HBM 16 mm. professional drill press

Maximum drilling capacity in steel 16 mm. |Engine power 550 Watt / 0.75 Pk. |Speed ??range Van 300 tot 2550 O/min. |Spindle stroke 65 mm. |Recording MC2 |Dimensions of the work table 250 x 250 mm. |Diameter of the T-Slots 16 mm. |Dimensions of the work table of the foot 180 x 200 mm. |Dimensions of the entire foot 240 x 415 mm. |Diameter of the column 58 mm. |Maximum distance spindle / Table 335 mm. |Maximum distance spindle / foot 495 mm. |Total height 920 mm. |Unloading 155 mm. |Voltage 230 Volt. |

HBM 32 mm. professional floor-standing drill press with digital depth reading

Maximum drilling capacity in steel 32 mm. |Engine power 1100 Watt / 1.5 Pk. |Speed ??range Van 150 tot 2450 O/min. |Spindle stroke 120 mm. |Recording MC4 |Dimensions of the work table 405 x 450 mm. |Diameter of the T-Slots 16 mm. |Dimensions of the work table of the foot 335 x 380 mm. |Dimensions of the entire foot 430 x 570 mm. |Diameter of the column 92 mm. |Maximum distance spindle / Table 620 mm. |Maximum distance spindle / foot 1100 mm. |Total height 1700 mm. |Unloading 250 mm. |

HBM 32 mm. professional column drill floor model

Maximum drilling capacity in steel 32 mm. |Engine power 1100 Watt / 1.5 Pk. |Speed ??range Van 150 tot 2450 O/min. |Spindle stroke 120 mm. |Recording MC4 |Dimensions of the work table 350 x 350 mm. |Diameter of the T-Slots 14 mm. |Dimensions of the work table of the foot 270 x 290 mm. |Dimensions of the entire foot 350 x 460 mm. |Diameter of the column 92 mm. |Maximum distance spindle / Table 650 mm. |Maximum distance spindle / foot 1100 mm. |Total height 1700 mm. |Unloading 220 mm. |

HBM 20 mm. professional drill press

Maximum drilling capacity in steel 20 mm. |Engine power 550 Watt / 0.75 Pk. |Speed ??range Van 220 tot 2840 O/min. |Spindle stroke 82 mm. |Recording MC2 |Dimensions of the work table 290 x 290 mm. |Diameter of the T-Slots 16 mm. |Dimensions of the work table of the foot 205 x 205 mm. |Dimensions of the entire foot 270 x 460 mm. |Diameter of the column 72 mm. |Maximum distance spindle / Table 305 mm. |Maximum distance spindle / foot 495 mm. |Total height 985 mm. |Unloading 180 mm. |Voltage 230 Volt. |

HBM 20 mm. professional drill press with digital depth readout

Maximum drilling capacity in steel 20 mm. |Engine power 550 Watt / 0.75 Pk. |Speed ??range Van 220 tot 2840 O/min. |Spindle stroke 82 mm. |Recording MC2 |Dimensions of the work table 305 x 305 mm. |Diameter of the T-Slots 16 mm. |Dimensions of the work table of the foot 185 x 200 mm. |Dimensions of the entire foot 245 x 415 mm. |Diameter of the column 72 mm. |Maximum distance spindle / Table 330 mm. |Maximum distance spindle / foot 520 mm. |Total height 975 mm. |Unloading 160 mm. |Voltage 230 Volt. |

HBM 40 mm. gear driven drill press deluxe 400v

Maximum drilling capacity in steel 40 mm. |Spindle intake MC 4. |Dimensions of the work table 500 x 460 mm. |Dimensions of the entire foot 650 x 450 mm. |Spindle stroke 120 mm. |Column diameter 115 mm. |Maximum distance from spindle to table 715 mm. |Speed ??range 75 - 150 - 180 - 280 - 360 - 560 - 600 - 1000 - 1200 - 1600 - 2000 - 3200 O/min. |Engine power 1500 Watt. |

HBM 40 mm. professional gear driven drill press

Maximum drilling capacity in steel 40 mm. |Maximum milling capacity in steel 32 mm. |Maximum casing milling capacity 80 mm. |Engine power 1100 / 1500 Watt - 1.5 / 2 Pk. ( 2 toeren motor, 400 Volt ) |Speed ??range 75 - 150 - 180 - 280 - 360 - 560 - 600 - 1000 - 1200 - 1500 - 2000 - 3200 O/min. |Spindle stroke 120 mm. |Recording MC 4. |Dimensions of the foot 650 x 450 mm. |Placement dimensions 82 x 72 x 193 cm. |

Euroboor cooling lubricant for mild steel 500 ml

Lubricates and cools effectively. Extends the life of drills and chucks, even at high speeds. Excellent as a drilling and tapping lubricant for medium to heavy duty operations. Increases efficiency and ideal for general metalworking. Extends the life of drills and chucks Excellent as a drilling and tapping lubricant for medium to heavy duty operations Increases efficiency and ideal for general metalworking Content: 500ML Brand: Euro drill This cooling lubricant from Euroboor is ideal for processing mild steel. It effectively lubricates and cools, extending the life of drills and chucks, even at high speeds. This agent is excellent as a drilling and tapping lubricant for medium to heavy operations. It increases efficiency and is ideal for general metalworking. In short, Euroboor Cooling Lubricant for Mild Steel 500 ML is a powerful lubricant that contributes to achieving better results when working with mild steel. This package contains 500ML. Most important features: Extends the life of drills and chucks Excellent as a drilling and tapping lubricant for medium to heavy duty operations Increases efficiency Ideal for general metalworking Content: 500ML Order Euro Drill Cooling Lubricant for Mild Steel 500 ML today and make your operations run smoother!

HBM Profi 6 / 8 /10 / 12 mm Square Hole Drill Attachment for Column Drilling Machines

Drill square holes in wood with the HBM Profi 6 / 8 /10 / 12 mm Square Hole Drill Attachment for Pillar Drilling Machines. The set contains the various sizes of collars with which you can attach a bracket by means of a clamp attachment to the spindle shaft of almost any column drilling machine. If this bracket is attached to the shaft of the column drilling machine, the desired “square drill bit†can be clamped in this bracket. The “drilling of square holes†works as follows: The “square drill†consists of a normal wood drill bit that is clamped in the drill head of the drilling machine and a square “chisel†(broach) that fits closely around this wood drill bit. fits through and which is pushed down (through the wood) by moving the shaft of the drill press down. The rotating wood drill and the stationary square chisel are thus pressed through the wood at the same time as the shank. This creates a round hole (through a normal drilling operation) with (immediately afterwards) a square contour (due to the broaching operation with the square chisel). The HBM Profi 6 / 8 /10 / 12 mm Square Hole Drill Attachment for Column Drilling Machines also has a spacer / longitudinal guide / stop and a number of attachments to clamp / press the workpiece on the table of the column drilling machine against the stop. The set comes with: Drill 6mm Drill 8mm Drill 10mm Drill 12mm Spacer Longitudinal guide Scale Fittings With the HBM Profi 6 / 8 /10 / 12 mm Square Hole Drill Attachment for Column Drilling Machines, drilling square holes in wood is easy and quick. Order this set now and complete your job.

Bernardo Bench drill TB 14 T - 230V

(1)

Description of Bernardo TB 14 T Column Drilling Machine Bernardo Column drilling machine TB 14 T Special characteristics Quality ball bearings ensure a high concentricity of the vernier Quiet working due to solid drive pulleys and quality belts Swivel drilling table (+45 degrees), height adjustable by rack Standard with T-slots in the ground base plate Powerful and highly ventilated aluminum motor according to IP 54 Precision keyless chuck included in delivery Machined base plate for clamping larger workpieces Ergonomic handles for comfortable working Technical data of Bernardo TB 14 T Column drilling machine Specifications Capacity : 14 mm Drill chuck : 1 - 13 mm Spindle mount : B16 fixed Speed : 620 - 2620 rpm (5) Discharge : 130 mm Pinole stroke: 65 mm Table: can be swiveled 45 degrees Dimensions (WxDxH) : 300x510x690 mm Weight : 24 Kg Standard Included Keyless chuck Spindle mount MK 2 / B 16 Height-adjustable protective cover Separate emergency stop Operating tool Specifications Order number 15264 Brand Bernardo Reference 01-1026 Fashion model TB 14 T Column drilling machine EAN code 9009468044022

Bernardo Bench drill TB 16 T - 230V

(1)

Supplied as standard 1x Keyless chuck 1x Spindle mount MK 2 / B 16 1x Height-adjustable protective cover 1x Separate emergency stop 1x Set of T-slots 1x Operating Tool Special characteristics Bernardo table drill. The affordable drill TB 16 T is available with a drilling capacity of 16 mm. The height-adjustable guard protects both the drill and the drill head completely. This makes the TB 16 an extremely safe drill and very suitable for craftsmen and professional training. Quality ball bearings ensure a high concentricity of the vernier Large drilling table with diagonal T-grooves Quiet working due to solid drive pulleys and quality belts Swivel drilling table (+45°), height-adjustable by rack Standard with T-slots in the ground base plate Powerful and highly ventilated aluminum motor according to IP 54 Precision keyless chuck included in delivery Machined base plate for clamping larger workpieces Ergonomic handles for comfortable working Specifications Range: 155mm Spindle mount: MK2 Table: can be swiveled 45° Drilling capacity: 16 mm Drill chuck: 1-16 / B16 quick clamp mm Diameter: 58mm Motor power: 0.55 kW Pinole stroke: 65 mm T-slots: 16 mm Speed: 300 - 2550 rpm Dimensions width: 400 mm Dimensions depth: 570 mm Dimensions height: 920 mm Distance spindle - bottom plate: 600 mm Distance spindle - table max: 445 mm Base plate size: 185 x 200 mm Table size width: 245 mm Table size length: 245 mm Net weight (kg): 36

Scheppach Bench drill DP16VLS

(1)

Whether it concerns metal, plastics, hard or soft wood: the Scheppach drill press DP16VLS offers numerous application options, allowing you to work on various materials effortlessly. The position laser makes it very easy to achieve accurate drilling results. Characteristics • 5 speeds for wood, metal and all common plastics • Max 16 mm drill chuck • Robust steel construction • Powerful 500W motor • Laser for accurate drilling results Specifications • Dimensions (LxWxH): 460x255x630mm • Distance to frame foot: max 300mm • Distance to table: max 220mm • Drill chuck: clamping range 3-16mm • Weight: 17 kg • Motor: 230V - 500W • Table dimensions: 160x168 mm • Table adjustment: 45° - 0 - 45° Specifications: Item number: 5906810901 Barcode: 4046664068808 Brand: SCHEPPACH Net weight (kg): 14 Cooling Integrated: No Chuck span: 3 - 16 mm Height: 620mm Distance spindle - bottom plate: 250 mm Distance spindle - table: 170 mm Length: 400mm Contact surface length: 160 mm Cable length: 1.83 m max. drill diameter: 16 mm nom. power consumption: 500 W Rotatable: -45 - 45 &: 176; Speed: 600 - 2600 rpm Infinitely adjustable: No Suitable for metal: Yes Suitable for wood: Yes Total height: 620 mm Type: Table Drill chuck version: B16 System Type: Quick Clamp Voltage: 230 V Width: 140mm Contact surface width: 160 mm Frame included: No With digital readout: No Manual: Parts list/exploded drawing: Logo 1: Logo 2:

Bernardo Column drilling machine SB 32 S - 400V, RL

Bernardo column drilling machine. The SB 32 S is a solid, refined drill press with a drilling capacity of 32 mm. This model is equipped with a right-left switch. Due to the optimal price-quality ratio, this model is very suitable for modellers and hobbyists, but the drill is also perfect for agricultural and repair companies. Special characteristics Quality ball bearings ensure a high concentricity of the vernier Surface-finished work table, height-adjustable by rack and crank Swivel drilling table (+45°), height-adjustable by rack Rotational direction switch for right and left rotation Powerful and highly ventilated aluminum motor according to IP 54 Precision keyless chuck included in delivery Machined base plate for clamping larger workpieces Large drill table with T-slots and circumferential coolant channels Supplied as standard with: Keyless chuck 1 – 16 mm / W 18 Drill chuck MK 4 / B 18 Height-adjustable protective cover Cam switch for right and left rotation T-slots Operating tool Brand BERNARDO Net weight (kg) 36 Dimension width 400mm Dimension depth 720mm Dimension height 1700mm Distance spindle – Base plate (mm) 1125mm Distance spindle – table max (mm) 760mm drill chuck 1-16 / B18 QUICK TENSION mm Dimensions bottom plate 295 x 270mm drilling capacity 32mm Diameter 92mm Engine power 1.1 kW Pinole stroke 120mm spindle mount MK4 Table 45° swiveling Table size width 300mm Table size length 290mm T-slots 14mm Rpm 150 – 2450 rpm Unloading 175mm

HBM 13mm. Column drilling machine

The HBM 13mm. Column drilling machine from HBM is a powerful drilling machine that does an excellent job when a lot is asked of it. The machine is equipped with a protective cover for extra safety. The drilling table is tiltable, so you can easily adjust the drilling angle. The drilling machine is operated by means of a double lever with a thickened end, which gives you more grip. In addition, the recesses in the bottom of the machine ensure that the drill can be used flexibly. The movements of the drilling machine take place around a sturdy, thick central tube, which ensures a stable design and a sustainable investment. Below you will find the product specifications of the HBM 13 mm column drilling machine: Maximum drilling capacity in steel: 13 mm. Voltage: 230 Volts. Motor power: 250 watts. Speed Range: 500-890-1400-1900-2500 O/Min. Spindle stroke: 50 mm. Recording: B16. Work table dimensions: 164 x 162 mm. Slot width: 12mm. T-nut: M10. Base plate dimensions: 190 x 298 mm. Column diameter: 46mm. Maximum distance spindle/table: 160 mm. Maximum distance spindle/foot: 240 mm. Total height: 580mm. Dropout: 104mm. Packing dimensions: 47 x 24 x 35 cm. Weight (net): 15.5 Kg. Buy the HBM 13mm now. Column drilling machine from HBM and enjoy a powerful drilling machine that does an excellent job, even with a large workload. The machine is safe to use and has a stable design. Invest in quality and buy this drill press today!

Bernardo Column drilling machine SB 25 S, 400V, RL

Column drilling machine SB 25 S from Bernardo. The solid and technically developed SB 25 S column drilling machine is available with a drilling capacity of 25. Larger drilling diameters can be achieved without any problem when core hole drills are used. This model is equipped with a right- and left-hand rotation switch as standard. Due to the optimal price/quality ratio, this model is mainly used for model building and hobby work, but also in agriculture or in repair shops. Special characteristics Quality ball bearings ensure a high concentricity of the vernier. Specifications: Item number: 01-1046 Barcode: 9009468038588 Brand: BERNARDO Net weight (kg): 36.1 Floor length (lying length): 205 mm Floor width (laying width): 205 mm Column foot diameter: 80 mm Cooling Integrated: No Digital Pinole Stroke Display: No Digital speed readout: No Drill chuck span: 1 - 16 mm Height: 1560mm Distance spindle - bottom plate: 1175 mm Distance spindle - table: 685 mm discharge: 175 mm Length: 660mm Length of the contact surface: 290 mm Cable length: 5 m Max. drill diameter: 25 mm nom. power consumption: 1100 W Rotatable: -45 - 45 &: 176; Speed: 280 - 2380 rpm Infinitely adjustable: No Stroke: 85mm Suitable for metal: Yes Suitable for wood: Yes Toolholder: MK3 Total height: 1560 mm T-slot size: 16 mm Type: Column Drill chuck version: B18 System Type: Quick Clamp Voltage: 400 V Width: 380mm Contact surface width: 290 mm Frame included: No Logo 2:

CONSTRUCTOR Constructor drill press 350W with vice and laser - 13mm - 5 speeds

This CONSTRUCTOR column drilling machine is perfect for drilling in wood, metal and plastic. The included vice makes work easier. The machine has 5 speeds and can adapt to different materials. In addition, the table can be tilted from -45 to 45°, ideal for oblique drilling. With the height adjustment you can easily adjust the drilling height. This product has a 5-year warranty. Product Features: Power: 350W Key holder: 13mm Speeds: 650 - 900 - 1300 - 1800 - 2650 rpm Table tilt: -45 to 45° Table dimensions: 160x160mm Drill height: 59cm Vise: included Laser: equipped for precise drilling Weight: 14.5 kg Warranty: 5 years

Scheppach Bench Drilling Machine DP16SL

(1)

The Scheppach Bench Drilling Machine DP16SL is a professional drilling machine with a laser for extra precision. The drill is equipped with a chuck and offers optimum performance for professional results. The DP16SL is an excellent choice for drilling in metal and wood. Special features of the Scheppach Bench Drilling Machine DP16SL: Standard with chuck Laser for extra precision Suitable for metal and wood Equipped with a chuck Optimal performance Professional results Specifications: Item number: 4906807901 Bar code: 4046664036432 Brand: SCHEPPACH Net weight (kg): 25 Cooling integrated: No Drill chuck span: 3 - 16 mm Height: 732mm Distance spindle - bottom plate: 405 mm Distance spindle - table: 305 mm Length: 235mm Length of the contact surface: 194 mm Cable length: 1.83 m max. drill diameter: 16 mm Nom. power consumption: 550 W Rotatable: -45 - 45° Speed: 510 - 2430 rpm Infinitely adjustable: No Suitable for metal: Yes Suitable for wood: Yes Total height: 732mm Type: Table Drill chuck design: B16 System Type: Quick Release Voltage: 230 V Width: 482mm Width of the contact surface: 165 mm Undercarriage included: No With digital reading: No Manual: Logo 1: Parts list/exploded drawing: Guarantee: