Trimming machines Products
-
HBM metal cut-off saw / drycutter deluxe
(1)
Voltage 230 Volt |Engine power 2300 Watt / 3 Pk. |Flow 16A Traag. |Rpm 1300 O/min. |Saw blade diameter 355 mm. |Axle hole of the saw blade 25.4 mm. |Thickness of the Saw Blade 2.4 mm. |
€ 449,95Regular price€ 539,94In stockDelivery time 1 - 3 working days -
HBM 250 mm T-4 (200 Teeth) Saw Blade Stainless Steel Axle Hole 32mm
The HBM 250 mm T-4 (200 Teeth) Saw Blade Stainless Steel Axle 32mm is a saw blade of TOP quality HSS - M2. This saw blade is suitable for materials with a hardness between 500N/mm2 and 800N/mm2 and is very suitable for cutting materials with a high tensile strength of 500 to 800N/mm2 and stainless steel. The saw blades are suitable for manual, semi-automatic and fully automatic sawing machines, and are provided with a multi-layer PVD coating. Technical data T3 = 250 Teeth. (Suitable for wall thickness from 1 mm and thicker.) T4 = 200 Teeth. (Suitable for wall thickness from 2 mm and thicker.) T5 = 160 Teeth. (Suitable for wall thickness from 3 mm and thicker.) With the HBM 250 mm T-4 (200 Teeth) Saw Blade Stainless Steel Axle Hole 32mm you are assured of a powerful saw blade that is suitable for various materials. The multi-layer PVD coating provides extra protection and durability, so that you can enjoy your saw blade for longer. Order today and make cutting materials a lot easier!
€ 49,95Regular price€ 59,94In stockDelivery time 1 - 3 working days -
HBM 315 mm saw blade stainless steel
These blades are provided with a multi-layer PVD coating. This type of saw blade is very suitable for sawing materials with a high tensile strength of 500 to 800 N / mm2 and stainless steel. The saw blades themselves are of TOP quality HSS - M2 and are suitable for materials with a hardness between 500 N / mm 2 and 800 N / mm 2. The saw blades are suitable for manual, semi automatic and fully automatic sawing machines. Technical data of the 315 mm saw blades. T3 = 300 Teeth. (Suitable for wall thickness from 1 mm. And thicker.) T4 = 250 Teeth. (Suitable for wall thickness from 2 mm. And thicker.) T5 = 200 Teeth. (Suitable for wall thickness from 3 mm and thicker.)
€ 84,95In stockDelivery time 1 - 3 working days -
HBM 250 mm saw blade steel
Diameter 250 mm. |Ash hole 32 mm. |
€ 39,95In stockDelivery time 1 - 3 working days -
HBM 350 mm saw blade steel, hole 40 mm
The blades are provided with a special VAPO oxidation layer. This is a steel oxide layer (Fe3O4) that the tool life and saw blade life considerably promoted. This type of saw blade is very suitable for sawing all types of steel. The saw blades themselves are of TOP quality HSS - M2 and are suitable for materials with a hardness between 500 N / mm 2 and 800 N / mm 2. The saw blades are suitable for manual, semi automatic and fully automatic sawing machines. Technical data of the 350 mm saw blades. T3 = 340 Teeth. (Suitable for wall thickness from 1 mm. And thicker.) Ash hole 40 mm. T4 = 280 Teeth. (Suitable for wall thickness from 2 mm. And thicker.) Ash hole 40 mm. T5 = 220 Teeth. (Suitable for wall thickness from 3 mm. And thicker.) Ash hole 40 mm.
€ 99,95In stockDelivery time 1 - 3 working days -
HBM Metal crosscut saw / Drycutter / Dry saw - 2600W
The HBM Metal Miter Saw / Drycutter / Dry Saw is a perfect machine for cutting through metal plates. With a motor power of 2600 Watt / 3.5 HP, this machine is powerful enough for cutting through metal plates. The technical data of this machine are as follows: Voltage: 230 Volts Current: 16A Slow Engine power: 2600 Watt / 3.5 HP. Speed: 3800 O/min. Saw blade diameter: 355 mm. Saw blade axis hole: 25.4 mm. Saw blade thickness: 4 mm. Cutting capacity at round: 100 mm. Cutting capacity for square: 170 x 90 mm. Packing dimensions: 56 x 33 x 43 cm. Weight: 15 Kg. With the HBM Metal Miter Saw / Drycutter / Dry Saw you can cut through metal plates quickly and precisely. The machine is easy to operate and has a long service life. This machine is perfect for professional use.
€ 164,95Regular price€ 197,94In stockDelivery time 1 - 3 working days -
HBM universal undercarriage for crosscut saw machines
Dimensions folded out 480 x 2000 x 660 mm. |Dimensions Folded 370 x 800 x 220 mm. |Maximum mounting depth 480 mm. |Carrying capacity 225 Kg. |
€ 69,95Regular price€ 97,93Almost sold out!Delivery time 1 - 3 working days -
HBM 315 mm saw blade steel
The blades are provided with a special VAPO oxidation layer. This is a steel oxide layer (Fe3O4) that the tool life and saw blade life considerably promoted. This type of saw blade is very suitable for sawing all types of steel. The saw blades themselves are of TOP quality HSS - M2 and are suitable for materials with a hardness between 500 N / mm 2 and 800 N / mm 2. The saw blades are suitable for manual, semi automatic and fully automatic sawing machines. Technical data of the 315 mm saw blades. T3 = 320 Teeth. (Suitable for wall thickness from 1 mm. And thicker.) T4 = 250 Teeth. (Suitable for wall thickness from 2 mm. And thicker.) T5 = 200 Teeth. (Suitable for wall thickness from 3 mm and thicker.)
€ 84,95In stockDelivery time 1 - 3 working days -
saw blades for drycutters and hand-held circular saws for metal
Dimensions 355 x 25.4 x 2,4 x 72T |Ash hole 25,4 mm. |Rpm 1700 Toeren / Min |
€ 79,95In stockDelivery time 1 - 3 working days -
HBM 350 mm saw blades stainless steel hole 40 mm
These blades are provided with a multi-layer PVD coating. This type of saw blade is very suitable for sawing materials with a high tensile strength of 500 to 800 N / mm2 and stainless steel. The saw blades themselves are of TOP quality HSS - M2 and are suitable for materials with a hardness between 500 N / mm 2 and 800 N / mm 2. The saw blades are suitable for manual, semi automatic and fully automatic sawing machines. Technical data of the 350 mm saw blades. T3 = 340 Teeth. (Suitable for wall thickness from 1 mm. And thicker.) Ash hole 40 mm. T4 = 280 Teeth. (Suitable for wall thickness from 2 mm. And thicker.) Ash hole 40 mm. T5 = 220 Teeth. (Suitable for wall thickness from 3 mm. And thicker.) Ash hole 40 mm.
€ 92,95In stockDelivery time 1 - 3 working days -
HBM 315 profi metal cut-off saw
Saw blade diameter 315 mm. |Voltage 400V |Engine power 750 / 1500 Watt - 1.8 / 2.6 Pk. ( 2 Toeren motor. ) |Saw blade speed 19 / 38 O/min. |Axle hole of the saw blade 40 mm. |Maximum opening of the material clamp 145 mm. |round 90 mm. |Square 70 x 70 mm. |Rectangle 90 x 80 mm. |round 70 mm. |Rectangle 80 x 70 mm. |
€ 2290,97Regular price€ 3092,81In stockDelivery time 1 - 4 working days -
HBM 275 mm saw blade stainless steel hole 40 mm
These blades are provided with a multi-layer PVD coating. This type of saw blade is very suitable for sawing materials with a high tensile strength of 500 to 800 N / mm2 and stainless steel. The saw blades themselves are of TOP quality HSS - M2 and are suitable for materials with a hardness between 500 N / mm 2 and 800 N / mm 2. The saw blades are suitable for manual, semi automatic and fully automatic sawing machines. Technical data of the HBM 275 mm saw blades. T3 = 280 Teeth. (Suitable for wall thickness from 1 mm. And thicker.) T4 = 220 Teeth. (Suitable for wall thickness from 2 mm. And thicker.) T5 = 180 Teeth. (Suitable for wall thickness from 3 mm and thicker.)
€ 54,95In stockDelivery time 1 - 3 working days -
HBM cutting disc for the drycutter
Saw blade diameter 350 mm. |Axle hole of the saw blade 25,4 mm. |Thickness of the Saw Blade 3,0mm. |
€ 5,95Regular price€ 8,03In stockDelivery time 1 - 3 working days -
HBM 275 mm saw blade steel bore hole 40 mm
The blades are provided with a special VAPO oxidation layer. This is a steel oxide layer (Fe3O4) that the tool life and saw blade life considerably promoted. This type of saw blade is very suitable for sawing all types of steel. The saw blades themselves are of TOP quality HSS - M2 and are suitable for materials with a hardness between 500 N / mm 2 and 800 N / mm 2. The saw blades are suitable for manual, semi automatic and fully automatic sawing machines. Technical data of the HBM 275 mm saw blades. T3 = 280 Teeth. (Suitable for wall thickness from 1 mm. And thicker.) T4 = 220 Teeth. (Suitable for wall thickness from 2 mm. And thicker.) T5 = 180 Teeth. (Suitable for wall thickness from 3 mm and thicker.)
€ 54,95In stockDelivery time 1 - 3 working days -
HBM 350 profi metal cut-off saw
Saw blade diameter 350 mm. |Voltage 400V |Engine power 1400 / 2000 Watt - 1.8 / 2.6 Pk. ( 2 Toeren motor. ) |Saw blade speed 19 / 38 O/min. |Axle hole of the saw blade 40 mm. |Maximum opening of the material clamp 145 mm. |round 110 mm. |Square 95 x 95 mm. |Rectangle 110 x 100 mm. |round 90 mm. |Square 80 x 80 mm. |Rectangle 85 x 80 mm. |
€ 2316,97Regular price€ 3012,06Almost sold out!Delivery time 1 - 4 working days -
HBM 275 profi metal cut-off saw
Saw blade diameter 275 mm. |Voltage 400 Volt |Engine power 1400 / 2000 Watt - 1.8 / 2.6 Pk. ( 2 Toeren motor. ) |Saw blade speed 48 / 96 O/min. |Axle hole of the saw blade 40 mm. |Maximum opening of the material clamp 110 mm. |round 70 mm. |Square 60 x 60 mm. |Rectangle 100 x 60 mm. |round 60 mm. |Rectangle 70 x 60 mm. |
€ 1965,37Regular price€ 2358,44Almost sold out!Delivery time 1 - 4 working days -
HBM deluxe universal frame for crosscut and miter saws
Height of the bed 80 cm. |Width of the bed 120 cm. |Maximum width 220 cm. |Maximum mounting depth 500 mm. |Carrying capacity 225 Kg. |
€ 124,95Regular price€ 162,44In stockDelivery time 1 - 3 working days -
Scheppach miter saw MT150 355 mm
(1)
With the Scheppach miter saw MT150 you get a powerful machine with which you can make precise cuts in all metals. Thanks to the 2600 Watt motor and the 355 mm saw blade, this miter saw is suitable for all kinds of jobs. In addition, the closed cutting disc protection ensures that you can work safely without being exposed to flying sparks. The integrated soft start prevents high torques when starting, so that the machine lasts longer. Included accessories: work clamp and soft start The miter saw is mounted on a robust plate with non-slip rubber feet, which keeps it firmly in place Thanks to the weight of 12.9 kg, the machine is stable and easy to transport The Scheppach miter saw MT150 is ideal for clean and precise cuts in metal The powerful 2600W motor with 4200 min-1 ensures an efficient saw cut The saw disc has a diameter of 355 mm, and the maximum cutting height is 115 mm With the angle of inclination of 0-45° you can make miter cuts The closed grinding wheel guard protects against flying sparks, and the spindle lock makes it easy to change the grinding wheel With the Scheppach miter saw MT150 you can carry out various jobs in metal accurately and safely. Thanks to the included accessories, the stable construction and the large cutting capacity, this miter saw is a reliable choice for the demanding handyman.
€ 175,95Regular price€ 193,55In stockDelivery time 1 - 3 working days