Other - Sets Products

HBM 9-piece inner bearing puller set with impact puller

(1)

Size range 8 mm. ( 8-10 mm. )10 mm. ( 10-12 mm. )12 mm. ( 12-14 mm. )15 mm. ( 15-17 mm. )17 mm. ( 17-20 mm. )20 mm. ( 20-24 mm. )25 mm. ( 25-29mm. )30 mm. (30-32 mm. ) |

HBM Digital Brake Fluid Tester Boiling Point Tester For DOT3, DOT4, DOT5, DOT5, DOT5.1, Super DOT4

With the HBM Digital Brake Fluid Tester Boiling Point Tester you can easily measure the quality of your brake fluid. The tester is suitable for DOT3, DOT4, DOT5, DOT5, DOT5.1 and Super DOT4 brake fluids and measures the boiling point of the fluid with an accuracy of +/- 3% to +/- 5%, depending on the temperature. The tester is equipped with a digital display and is easy to use. Connect the tester to your vehicle's battery and dip the test probe into the brake fluid. After 60-90 seconds, the tester shows the boiling point of the brake fluid on the display. This way you can quickly and easily determine whether the brake fluid is still in good condition. Technical data Suitable for: DOT3, DOT4, DOT5, DOT5, DOT5.1, Super DOT4 Boiling point: 100 - 180 degrees Celsius (accuracy +/- 3%) / 180 - 320 degrees Celsius (accuracy +/- 5%) Voltage: 12 Volts Test time: 60 - 90 seconds

HBM 12-piece chain tool and latch set

The HBM 12 Piece Chain Tool and Latch Set is a professional tool specially designed to save you time when removing and installing camshaft and drive chains. Suitable for light and medium chains of motorcycles, passenger cars and light vans with a chain diameter of #35 to #630. Specifications Suitable for camshaft and drive chains For light and medium heavy chains Chain diameter from #35 to #630 With 3 drift pins (drifts) in 2.2 | 2.9| 3.8 diameter Packed in plastic case With this set you can assemble and disassemble chains quickly and easily. The different pins allow you to easily adjust the chain to the correct size and ensure trouble-free operation of the chain. HBM is proud to introduce this Chain Tool and Latch Set that meets the requirements of professionals while remaining affordable. This makes it easier to work quickly, efficiently and safely without incurring high costs for hiring professionals. Save time and money with HBM 12 Piece Chain Tool and Latch Set. Order now!

HBM 57-piece tire repair set

(1)

Car tire repair set 57 piece in sturdy metal version, with this set you can repair smaller holes caused by nails, screws or other small sharp objects. The HBM 57 Piece Tire Repair Kit consists of. 50 x Tire seal 6 X 100 mm. 1 x drill. 1 x pull needle. 1 x Tire fat. 1 x Glue. 1 x Blade.

HBM professional ball joint disassembly set

Technical data of the HBM Professional Ball Joint Disassembly Set This set can be used for ao Mercedes sprinter and Renault master This ball joint disassembly set consists of. C-bracket with pressure spindle and connection for compression parts Pressure piece ˜ 45mm Pressure piece ˜ 55mm Pressure piece ˜ 70mm Plunger Trap 55 - 70 - 75 (Central hole 14 mm.) Plunger Trap 55 - 70 - 75 (Central hole 24 mm.) Compression cap ˜ 45 mm Compression cap ˜ 50 mm

HBM headlight polishing set complete

(1)

The HBM Headlight Repair Kit is designed to eliminate the worst cases of headlight breakdown, yellowing, oxidation and scratches from your headlights. It includes everything needed to repair the most cloudy or sun-damaged lenses. Get good results on most plastic lenses, such as headlights, rear lights, trailers, boat windows, helmet visors, motorcycle windows and more. Professional results can be produced with this easy-to-use kit at a fraction of the cost. Technical data of the HBM Headlight Polishing Set Complete. HBM Headlight Repair kit for the removal of scratches, dust spots and discoloration from headlights. The TM Headlight Repair Set makes the car's headlights look like new again, so you can benefit from an optimum light output for better visibility on the road! This repair kit for car headlights can be applied to plastic surfaces. Repair weathered and dull headlights. This repair kit contains all products to fully repair weathered, dull and yellowed headlights and to bring them in new condition. After the treatment with the TM Headlight Repair Kit, the headlights look like new again. The headlight does not have to be dismantled from the car for treatment. Because of this you are able to do it easily yourself! Also for other plastic surfaces. This recovery set for headlights can also be used on other plastic surfaces. Think of boat windows, helmet visors, windshields, rear lighting and trailer lighting. How do I use this Headlight Repair Kit. To properly repair the car's headlights with the TM Headlight Preparation Set, we recommend performing the following steps. Step 1: Clean the surface. Clean the plastic of the headlight with water. Tape the area around the lens to avoid scratching sprayed surfaces. Step 2: Sanding the headlight. Wet the sanding disc and attach it to the supplied holder. Sand with three different grain sizes to completely remove severe yellowing, dullness and rust. Use the sanding discs from coarse to fine: P800, P1200, P2000. Step 3: Polish the headlight. Attach the orange polishing disc to the holder and apply the polishing paste. Polish the lens of the headlight until the shine is restored to new condition. For the best result, use an electric polishing or drilling machine. If you polish by hand, polish with clockwise at least 200 circular movements. Step 4: Protect the headlight. Clean the lens of the headlight and make sure it is dry before applying the protective layer. Use the white polishing disc from the kit. Apply the protective fluid evenly on the surface of the headlight. Make sure that you do not apply this directly to the sunlight. The protective fluid will, completely cured, form a layer on the headlight. Allow the liquid to dry for at least 2 hours in direct sunlight. After step 3, the lens of the headlight should remain dry for 24 hours. Advantages of this DIY Headlight Repair Set. This do-it-yourself repair kit for headlights allows you to easily and quickly repair the car's headlights. This makes the car headlights function bright and clear again, which contributes to road safety. This set is intended to repair 2 headlights.

HBM carburettor synchronization set 4-clock

With the HBM Carburetor Synchronization Set 4 clocks you can quickly and accurately synchronize 2 or more carburetors. This set is equipped with 4 pressure gauges and hoses, with which you can immediately view the reading of the gauges. The fuel-air mixture and rpm are not affected during testing, making for very easy operation. The set is suitable for high, low and alternating speed. Specifications: 4 pressure gauges 4 hoses 8 x 5 x 750 mm 4 replacement seal (gasket) 4 connectors 53mm (M6x0.75) 4 connectors 60mm (M6x1.00) 4 extension 3.9 x 52mm 4 extension 3.9 x 122mm With the HBM Carburetor Synchronization Set 4 clocks you keep your carburetors perfectly balanced. Order now and experience the convenience of accurately synchronizing your carburettors.

HBM compression tester for diesel engines

Pressure gauge 0-70 Bar / 0-1000 Psi |Hose length 36 cm. |

HBM 14-part vacuum pump for brake fluid - brake bleeder

Changing brake fluid and bleeding the brakes is not an easy job on your own. Fortunately, nice tools have been invented for this, such as this brake bleeder set. You can therefore simply change and bleed your brake system yourself from now on. You connect this set to the bleed nipple of the caliper or brake drum. By first creating a vacuum with the hand pump, you can be sure that no air will be added when the nipple is opened. By maintaining the vacuum level with a pump, you pull the brake fluid out of the brake system, as it were. The liquid then ends up in the supplied reservoir. Brake bleeder for multiple purposes. The set contains various adapter nipples for connection to brake calipers, but also to other parts. The vacuum pump can also be very useful in other situations. When venting is necessary, this pump offers a solution. Consider, for example, the venting of fuel systems. Especially when replacing the fuel filters of modern diesels, air quickly enters the system. You can easily remove this air by connecting this pump. The nipple for this is often found on top of the filter housing. Technical data of the HBM 15 Piece Vacuum Pump for Brake Fluid - Brake Bleeder With this handy vacuum pump you can vacuum brake systems of cars and motorcycles, but also test solenoid valves and under or overpressure valves, for example. With 7 universal adapters With 3 brake nipple adapters 1 collection reservoirs 2 long and 2 short hoses Nice quality switchable hand pump with pressure gauge, also ideal for motorcycle brakes and hydro clutches This pump has 2 functions. By clicking the knurled ring in/out, the pump can be switched between blowing and suction. With this complete and high-quality HBM 14-piece vacuum pump for brake fluid - brake bleeder set, maintaining your brake system is easy. Order today and save a lot of money and time!

HBM professional spring tensioner set 80 - 265 mm

(1)

Technical data of the HBM Spring tensioner set 80 - 265 mm. Car tools Steering wheel, hub and hanging tools. Maximum pressure 1050 kg. Number of terminal sets 3. Ash M 15 x 300 mm. Dimensions clamp set 1 65 mm. up to 125 mm. (Application range 80 mm to 115 mm.) Dimensions clamp set 2 2 x 88 mm. up to 160 mm. (Range of application 110 mm to 150 mm.) Dimensions clamp set 3 2 x 125 mm. up to 215 mm. (Application range 140 mm. To 195 mm.) Suitable for BMW, Toyota, Ford, Opel, VW, Audi, Saab, Nissan, Honda, Subaru, Volvo, Mitsubishi, etc. Other information. When mounting or dismantling the wheel suspension system, the spring on which there is a large amount of tension must be tensioned with this McPherson spring tensioner. The Macpherson spring tensioner is supplied with 3 sets of interchangeable clamps, so that almost all types of suspension can be mounted or dismantled both front and rear. The pressure on the spring increases as soon as the nuts of the spring tensioner are tightened, this can be done either manually or with an air ratchet. Delivered in a plastic storage case.

HBM 12 Piece Universal Accessory Set for Grease Gun

HBM 12 Piece Universal Accessory Set for Grease Gun This accessory set is intended to be connected to a grease pump or grease gun. The set contains various nozzles for different types and sizes of grease nipples and grease nipples. The set also contains the various adapters to apply lubrication and to pump grease into grease nipples in hard-to-reach places. The set consists of (among others): press-on 90° grease nozzles 4 mm + 6 mm 2 x 45° coupling piece rotatable needle nozzles (4 sizes) nozzle with rubber nose 250mm hose extension 90° coupling piece straight extension Everything comes in a handy case for storage and transport.

HBM universal diesel injector stroke extractor including adapters

(1)

The HBM Universal Diesel injector hammer puller including adapters is the solution for stuck or difficult to remove injectors. The ball-joint adapter allows for central work and prevents damage to the injectors and cylinder head. The special pull adapter prevents damage to the atomizer when removing. There are also 2 thread adapters included for stubbornly stuck atomizers, these adapters unfortunately damage the atomizer and must then be replaced. Contents: 3x hose puller: 1.6kg/160mm, 2.7kg/460mm, 5.1/600mm Drawbar forks with holes: 13.7x18mm, 105mm long, 12.7x19mm, 130mm long Slotted 1/2" Drive sockets, 6 pt, 100mm long. 25/27/28/29/30mm Sleeve design injector extractor with supporting shells, outer diameter 35mm, internal diameter 29mm, M17x1.0 spindle Pulling adapter with external thread M27x1.0(3pcs) and M25x1.0 Pulling adapter with internal thread M27x1.0(3pcs) Sliding hammer adapter for inner, outer and claw extractor With the HBM Universal Diesel injector hammer puller including adapters you can easily remove stuck or difficult to remove injectors without causing damage to the injectors and cylinder head. The different adapters make it possible to remove different types of atomizers. This product is universally applicable for diesel injectors and is suitable for professional use. The HBM Universal Diesel injector hammer puller including adapters is an indispensable tool for every mechanic. This product is of high quality and has a long service life. It comes with a 1-year warranty.

HBM brake line flaring set with pipe cutter, pipe cutter

Sizes 5, 6, 8, 10, 12, 14, 16 mm. |

HBM fuel pressure gauge set deluxe

The HBM Fuel Pressure Gauge Set Deluxe is the perfect solution for both direct and indirect fuel injection systems of almost all car brands. With a measuring range of 0-10 bar (140 PSI), this set is suitable for various models including AMC, Acure, Alfa-Romea, Audi, BMW, Chrysler, Daihatsu, Eagle, Fiat, Ford, GM, Geo, Honda, Hyundai, Jeep, Jaguar, Mazda, Mercedes Benz, Mitsubishi, Nissan, Datsun and Peugeot. Measuring range: 0-10 bar (140 PSI) Suitable for almost all car brands Suitable for direct and indirect fuel injection systems Including various adapters and couplings Supplied in a handy case With the HBM Fuel Pressure Meter Set Deluxe you have everything you need to measure and check the fuel pressure of your car. Order today and take advantage of the handy case in which the set comes.

HBM common rail diesel tester set with adapters

The HBM Common Rail Diesel Tester Set is an essential tool for any workshop dealing with diesel engines. With the help of this return flow meter you can measure the return flow of the fuel and you can test the injectors of your diesel engine, up to 6 injectors at the same time. Specifications 38 pcs 6 x Adapter: for Bosch injectors 6 x Adapter: for Siemens injectors 6 x Adapter: for Delphi injectors 6 x Adapter: for Denso injectors 6 x Measuring Tubes: 95ml 6 x Measuring cup: 105 ml with connecting hoses (65 cm) and connecting piece 1 x Aluminum strip: with hook for hanging on the hood Includes plastic case The HBM Common Rail Diesel tester set with adapters comes with 24 adapters and is suitable for Bosch, Denso, Siemens and Delphi systems. This test system is indispensable for any workshop dealing with diesel engines and is suitable for both professional use and hobbyists. The set is easy to use and comes in a handy plastic case, so you can easily store the set and take it with you to any job. The aluminum strip with hook allows you to hang the set from the bonnet, leaving your hands free to work. In short, the HBM Common Rail Diesel tester set with adapters is an indispensable tool for every workshop that deals with diesel engines. Order the kit today and ensure that you can always diagnose problems with your diesel injectors correctly.

HBM 28-part cooling system diagnosis / extortion and filling set

Control of pressure loss using hand pump with pressure gauge and test adapters. The measured pressure can be compared with standard values. Including vacuum filling device for cleaning the radiator and topping up coolant. This set is supplied inclusive. Thermometer up to 200 ° C Hand pump with pressure gauge with measuring range from 0 to 2.5 bar Vacuum filling device for trouble-free and air-free filling of the cooling system Connection piece R 123 / R 124 Connection piece R 123 / R 125 Adapter for Mercedes-Benz (W123, W124, W126 and W201), GM, Buick and Jeep Adapter for Peugeot, Subaru, Chrysler, Acura, GM, Mitsubishi, Nissan, Mazda, Toyota, Infinity, Geo, Suzuki, Isuzu and Mercedes-Benz Adapter for Mercedes-Benz (ML-Class, W163 and W164) and GM (Archiva, Skylarc and Grand Am 1992-2002) Adapter for Volvo, Saab, Sterling, Citroën, Renault, Fiat, Alfa Romeo, Jeep and Mini Adapter for VW Vento, T4, Passat (1996), Golf, Beetle and Sharan Adapter for Audi A4, A5 and A6, BMW 345, VW Passat (1997-2002) and Porsche Cayenne Adapter for BMW E32, E34, E36, E38, E39, E46 and E90 Adapter for VAG (Audi, Seat, Skoda and VW) Adapter for Ford Mondeo, International Land Rover, Opel and Ssangyong Adapter for Mercedes-Benz (C, E and S-Class) W140, W124, W210, W211, W215, W216, W22 and R230 Adapter for Ford Mondeo, Focus and C-Max Adapter for Mazda (M3) Adapter for Mercedes-Benz A-Class Adapter for BMW E60, E63, E64, E65 Adapter for VW Sharan 1.8T and 2.8 Adapter for Toyota RAV4, Previa Universal Cone Adapter

HBM 10-piece valve spring disassembly set, valve spring tensioner tool set

This professional, high-quality valve spring tensioner tool set is ideal for use on cars, vans, small water engines and most motorcycle engines. The adapters with different dimensions make this set one of the most versatile on the market, since they can remove and tension the springs on most cylinder heads. With this set you can mount the valve springs in the right way, because it makes it easier to tension the springs. Technical data of the HBM 10-piece Valve spring Disassembly set, Valve spring tensioner tool set. 5 x open adapters: 16 mm, 19 mm, 23 mm, 25 mm, 30 mm. 1 x Spring clamp "C" clamp. 3 x extension screws. 1 x tension rod. 1 x 10-piece valve spring tensioner set.

technical data of the HBM 19-piece door trim, trim strip dismantling set, trim clip pliers and radio navigation disassembly

With the HBM 19-piece Door Trim, Decorative Molding Disassembly Set, Upholstery Clip Pliers and Radio Navigation Disassembly Set, disassembling various parts is effortless. The set contains 11 plastic spoons for dismantling trims, door panels, decorative strips and other parts. The carbon steel pliers are heat treated and blackened, with a plastic coated grip and spring pressure for extra lifting power and easy access to hard to reach areas. 11 x Plastic spoons for removing moldings, door panels, trim strips, rubber joints, instrument panels, switches, rear-view mirror glasses (mirror glasses) 1 x Heat treated and blackened carbon steel spring loaded pliers for increased lifting force Grip with plastic coating Easy access to hard to reach places 2 x Upholstery clip pliers for damage-free removal of trims and upholstery (220 and 300 mm) 5 x Radio Removal Keys Made of high quality plastic Fiberglass reinforced Also very useful for hard to reach places Packed in a plastic storage case With the upholstery clip pliers, decorative moldings and upholstery can be dismantled without leaving any damage. Also included are 5 radio removal keys. Reinforced with the high-quality fiberglass plastic, this set comes in a plastic storage case. In short, a very handy set that is also suitable for hard-to-reach places. Order now and make the disassembly of parts a lot easier from now on with the HBM 19-piece Door Trim, Decorative Molding Disassembly Set, Upholstery Clip Pliers and Radio Navigation Disassembly Set from HBM.

HBM ball joint disassembly set

The HBM Ball Joint Disassembly Set is the ideal dismantling set for lower ball joints at Mercedes Benz without removing the wishbone. This set is suitable for the following models: Mercedes 220 S class (1998 - 2005) Mercedes 211 E-class (2002 - 2009) Mercedes 230 SL class (2001 - present) This ball joint disassembly set consists of: C-bracket with pressure spindle and connection for compression pieces Thrust piece Á˜ 22mm Thrust piece Á˜ 33mm Thrust piece Á˜ 57mm Compression cap Á˜ 40mm Compression cap Á˜ 54mm With this HBM Ball Joint Disassembly Set you can easily assemble and disassemble lower ball joints without removing the suspension arm. Order now and take advantage of our competitive prices!

HBM air conditioning diagnostic set

Pressure gauge 1 Tot 8 Bar |Pressure Van 0 Tot 34 Bar |Suitable for R407C, R404A en R134A. |

HBM 21-piece professional ball joint disassembly set

Suitable for mounting and dismantling lower ball joints on SUVs and commercial vehicles without removing the support arm. Technical data of the HBM 21-Piece Professional Ball Joint Disassembly Set C-bracket with pressure spindle and connection for compression fittings 230 mm Pressure bolt 1/4 "- 3/4" Pressure Buses 1-3 / 4 "x 2" - 2-1 / 4 "x 2-1 / 2" - 2-3 / 4 "x 3" Pressure Buses 2-1 / 4 "- 1-3 / 4" - 1-7 / 16 "- 2-3 / 4" - 2-1 / 4 " Adapter for Buses 2 " Pressure Flanges 2 "- 2-5 / 8" - 2 "- 1-1 / 4" - 1-3 / 4 " Mounting Flange 1-3 / 4 "

HBM professional chain tool and rivet set

Dimensions case 21,5 x 11,5 x 5 cm (L x B x H) |

HBM Diesel Injector Injector Puller for Mercedes CDI Engines

Injectors puller set for Mercedes CDI engines 4 Piece. suitable for assembly and disassembly of well-fitting common rail injectors. suitable for eg Mercedes CDI engines 611, 612 and 613. suitable for working in tight spaces due to the low support cylinder diameter. special tool construction makes it possible to pull the injector with high force. 1 atomizer connection, 12.5mm (1/2") drive, 10mm hexagon socket. 1 protective ring for mounting under the extractor sleeve. 1 foot 29mm, slot opening: 50mm, drive: 22mm. 1 pull spindle / pull-out sleeve, external hexagon drive: 21, 22 mm, slot opening: 85 mm. Gross weight 1080 Grams.

HBM 12-piece bearing puller set

Range Van 10 tot 100 mm lagerdiameter, maximale ashoogte 40 cm. |Capacity 2 Ton. |

HBM 6-part cooling system, extortion and filling set

Are you looking for a high-quality and versatile pressure and filling set for your cooling system? Then look no further than the HBM 6-piece cooling system pressure and filling set! This set is suitable for almost all common brands thanks to the supplied adapters that can expand approximately 4mm. A vacuum pump is used during pressure testing and filling, so that no air bubbles can form in the system. Perfect for pressurizing and filling any cooling system This kit comes with everything you need to get your cooling system working properly again. The kit includes a vacuum pump to remove all air and adapters to fit most popular car brands including Honda, BMW, Audi and Toyota. Whether you're a professional or a do-it-yourselfer, this pressure and fill kit is the perfect choice for anyone looking for an efficient way to repair their cooling system. Durable design for long-term use The HBM 6 Piece Cooling System Pressure and Fill Set is designed for long-term use. The set is made of high-quality metal and rubber, making it resistant to damage, wear and tear. The included adapters are made of durable plastic so you don't have to worry about them breaking or damaging easily. Moreover, the whole is delivered in a handy transport case, so that you can easily take the set with you to the place where you work on your car. Specifications Suitable for almost all common brands Material: metal and rubber Supplied in a handy transport case Including 4 adapters: 35 – 39 – 44 – 48 mm With the HBM 6-piece cooling system pressure and filling set, you have everything you need to maintain your cooling system quickly and efficiently. Order now and make sure your cooling system is like new again!

HBM piston ring compressor set

With this piston ring compressor set you can install piston rings ranging from 73 mm to 111 mm. The easy-to-use ratchet mechanism allows the user to compress the piston rings in small steps. The set contains 1 rattling piston ring pliers (self-adjusting) and 6 ring compressors, they are all supplied in a handy case. The 6 compressor sizes are: 73-79, 79-86, 86-92, 92-98, 98-105 and 105-111 mm. The set is made of durable material, which is ideal for daily use by both do-it-yourselfers and professional workshops.

HBM 8-part professional compression tester for gasoline engines

(1)

HBM 8 Piece Professional Compression Tester for Gasoline Engines The HBM 8 Piece Professional Compression Tester is the solution for measuring compression loss in car and petrol engines. With a pressure gauge designed to range from 0 - 20bar (0 - 300psi), this kit provides accurate readings of your engine's compression. The set comes with two fixed rods, a flexible hose and threaded connections for M10, M12, M14 and M18. This means that you can use the kit for multiple petrol engine types, giving you exceptional versatility in every measurement. This compression tester set is designed to last and is produced using only high quality materials. This means that you are assured of quality and durability with every measurement. Most important features: - Range of 0 - 20bar (0 - 300psi) pressure gauge - Includes two fixed rods - Flexible hose - Threaded connections for M10, M12, M14 and M18 With the HBM 8 Piece Professional Compression Tester for Gasoline Engines you are assured of accurate and reliable compression measurements, every time. Order the set now and take advantage of our fast delivery!

HBM 23 Piece Alternator Pully Removal Kit and Assembly Kit, Repair Kit

The HBM 23 Piece Alternator Pully Removal Set and Assembly Set, Repair Set consists of. 1 x T50 T-profile Bit socket with 1/2 "connection, 33T x 110 mm. Suitable for the Mercedes, A-Class. 1 x M10 Spline Bit sockets with 1/2" connection, of 33T x 110mm. Suitable for BMW, Ford, Mercedes, VAG); 1 x M10 Spine Bit Socket with 1/2" connection 31T x 98 mm. Suitable for Fiat. 1 x M10 Spine Bit Socket with 1/2" connection 11. mm. With universal fit. 1 x T50 T-profile bit x 75 mm. With universal fit. 1 x T40 T-profile bit x 75 mm. With universal fit. 1 x M8 internal teeth XZN Bit x 75 mm. With universal fit. 1 x M10 internal teeth XZN Bit x 75mm. Suitable for Renault. 1 x 10mm internal teeth XZN Bit x 75mm. With universal fit. 1 x 8mm Internal Teeth XZN Bit x 75mm. With universal fit. 1 x M10 spline bit 14mm HEX x 57mm. Suitable for Renault, BMW, Ford, Mercedes, Porsche, Opel, VAG. 1 x 33T x 22mm. Suitable for Renault, Mercedes. 1 x 33T x 17mm. With universal fit. 1 x 19mm. Bit with universal fit. 1 x 22mm. Bit with universal fit. 1 x 21mm Bit Suitable for Renault, BMW, Ford, Mercedes, Porsche, Opel, VAG. 1 x 4 Pin dynamo bit with universal fit. 1 x 33T x 15mm. Bit suitable for Ford. 1 x 17mm. Bit suitable for Ford. 1 x 38mm Bit with 3-pin connector suitable for Toyota. 1 x H28 x H22mm. Bit suitable for Porche. 1 x Adapter for 10 mm bits to 1/2" connection with universal fit.

HBM cooling system test and filling device

For trouble-free, air-free filling of the cooling system and simultaneous leakage testing. Universal design with quick release suitable for almost all vehicles. Including flexible hose with connections for working in limited space. Equipped with a special valve so that the accumulated underpressure is kept within the cooling system. Pressure gauge with rubber housing for protection.

HBM universal compression test set

If you are looking for a handy tool to test the condition of your petrol engine, the HBM Universal Compression Test Set is for you. This set comes with several spark plug adapters and a pressure gauge with a range of 0-20 Bar / 0-300 Psi, so you can measure quickly and easily. Technical data Compression gauge for: petrol engines Pressure gauge: 0-20 Bar / 0-300 Psi Hose length: 45 cm Spark Plug Adapters: 1 x M10 x1.0 1 x M12 x 1.25 1 x M14 x 1.25 1 x M18 x 1.5 Fixed connection with rubber: 2x for quick measurement The HBM Universal Compression Test Set comes with four different spark plug adapters, so you can test different engine types. In addition, there are two fixed connections with rubber for quick measurements. The pressure gauge has a range of 0-20 Bar / 0-300 Psi and the hose is 45 cm long, so you can easily reach everything. This compression gauge is an indispensable piece of car tool for anyone who tinkers with cars. Whether you are a professional or just want to maintain your own car, with the HBM Universal Compression Test Set you are ready for any challenge.