Bench Screws and Anvils Products

HBM professional long glue clamp / t-clamp

(2)

Long Glue clamp - T - clamp with painted finish. Cast iron heads and feet. For applying high pressure. Technical data of the HBM Professional Long Glue Clamp / T-Clamp These clamps are available in 3 different lengths Maximum clamping capacity 410/770/1070/1370/1670 mm.

HBM folding jaws for in the vice

Technical data of the HBM Zetbek for the vice. Magnetic jaws for the vice. For setting sheet steel up to 3 mm. fat.

HBM professional mini anvil

Dimensions 112,5 x 30 x 42,5 mm. |

HBM 3 kilogram anvil on foot

Total weight 3 Kg. |Total height 130 mm. |Base diameter 125 mm. |

HBM 75 mm. steel and nylon anvil in rubber holder

Technical data of the HBM 75 mm. Steel and Nylon Anvil in Rubber Holder. Size Steel anvil 75 x 16 mm. Size Nylon anvil 75 x 16 mm. Size Rubber foot 100 x 30 mm.

HBM hand vise model 4

Jaw width 8 mm. |Maximum opening of the pelvis 2,5 mm. |Total length 130 mm. |

HBM aluminum top jaws for the vice

Magnetic jaws.

HBM aluminum top jaws with rubber

Magnetic jaws covered with rubber.

HBM aluminum top jaws with double f

Magnetic jaws with a horizontal and vertical V in the jaws.

HBM Aluminum Top Jaws with Rubber for Extra Grip For in the bench vice

HBM Aluminum magnetic top jaws with Rubber clamping surface for in the vice. These aluminum magnetic top jaws are provided with rubber clamping surfaces in which grooves have been made. These grooves not only provide more grip, but also the possibility to clamp round or polygonal objects. The magnets are milled into the rear of these jaws and consist of iron oxide magnetic strips (iron oxide powder mixed with rubber). . These magnetic strips have the advantage that they are not brittle or fragile (unlike rare-earth or neodymium magnets). As a result, these magnets can never lose small splinters, which can then end up between your machine clamp (or vice) and the top jaw, causing them to no longer connect properly. The magnetic force of these iron oxide rubber strip magnets , is also such that the top jaws are properly pulled towards the clamp (or vice) without magnetizing your workpiece. These magnetic top jaws are available in the following widths: 100 mm - Item no. 9890. 125 mm - Item no. 9891. 150 mm - Item no. 9892.

HBM 2.5 x 300 mm. plate roller for the vice

(1)

Maximum working width 300 mm. |Maximum rolling capacity over the entire working width 2,5 mm. |Diameter of the rollers 32 mm. |

HBM 60 mm vice with table clamp

Jaw width 50 mm. |Maximum opening of the pelvis 60 mm. |Maximum opening of the table clamp 50 mm. |

HBM superjaws portable clamping system - vice

The HBM Superjaws Portable Clamping System - Vise offers powerful clamping force of 1000 kg for a controlled clamping pressure. The reversible sliding jaw provides an extra wide 956mm clamping capacity. The foot-operated clamping system leaves both hands free for full control over the workpiece. The extra-wide tripod provides maximum stability and the strong, powder-coated steel construction ensures a long service life. Technical data: Stable but compact folding chassis Clamps materials up to 956 mm wide Clamp is operated by foot pedal Clamping force up to 1000 kg Folded dimensions: 275 x 775 x 295 mm Unfolded dimensions: 980 x 1000 x 860 mm Weight: 16 kg The HBM Superjaws Portable Clamping System - Vise is perfect for those looking for a portable and powerful clamping system. It offers the possibility to clamp materials with a width of up to 956 mm with a clamping force of up to 1000 kg. This clamping system is easy to operate with the foot pedal and the extra-wide tripod provides maximum stability, while the strong powder-coated steel construction ensures a long service life. Invest in the HBM Superjaws Portable Clamping System - Vise and experience a higher degree of efficiency and accuracy while working with your workpieces.

black steel professional steel vises with pipe clamp

Base diameter 165 mm. |Jaw width 100 mm. |HOH mounting size 140 mm. |Maximum opening 140 mm. |Dimensions 420 x 155 x 180 mm. |Unloading 65 mm. |Jaw width 200 mm. |Dimensions of the anvil section 55 x 30 mm. |Maximum opening 205 mm. |Base diameter 125 mm. |HOH mounting size 125 mm. |Unloading 80 mm. |Dimensions 320 x 105 x 155 mm. |Dimensions of the anvil section 85 x 45 mm. |Jaw width 125 mm. |Base diameter 178 mm. |Maximum opening 145 mm. |HOH mounting size 150 mm. |Unloading 75 mm. |Dimensions 430 x 200 x 195 mm. |Dimensions of the anvil section 70 x 35 mm. |Base diameter 150 mm. |Dimensions 380 x 130 x 175 mm. |Jaw width 150 mm. |Maximum opening 190 mm. |Dimensions of the anvil section 75 x 40 mm. |

HBM 2 x 300 mm. finger clamp for in the vice

Maximum brewing capacity across the entire working width 2 mm. |Maximum working width 300 mm. |Width of the fingers 25 - 50 - 75 - 150 mm. |Maximum seating angle 90 graden. |

Heuer - Brockhaus vises

Jaw width 100 mm. |Maximum opening 125 mm. |Clamping depth 50 mm. |Jaw width 120 mm. |Maximum opening 150 mm. |Clamping depth 65 mm. |Jaw width 140 mm. |Maximum opening 200 mm. |Clamping depth 80 mm. |Jaw width 160 mm. |Maximum opening 225 mm. |Clamping depth 100 mm. |Jaw width 180 mm. |

HBM aluminum top jaws with felt

Magnetic pelvis covered with felt.

Heuer - Brockhaus turntables

Technical data of the Heuer - Brockhaus Turntables HEUER turntable are made of forged steel, 360 gr. rotatable and lockable in any position The closed receiving plate prevents the ingress of chips and dirt and the slewing ring and receiving plate are finished for good guidance.

Gutster Baby Bar 762mm with nail puller

(1)

Perfectly angled for overhead and floor use, the Gutster Baby Bar is particularly effective for tearing down old ceilings and demolishing floorboards. The nail puller on the back of the head makes it possible to remove nails from floors and ceilings with ease. The new extra strong oval shaped handle is designed to be stronger and lighter and is ideal for working in tight spaces. The new extra strong, lightweight welded head has spear-shaped tips to get under the floor and behind the ceiling. It is also very suitable for drilling drywall. Specifications: Item number: GB04 Bar code: 0860004266525 Brand: GUTTER Net weight (kg): 2.75 Length: 762mm Material: Steel Two-component version: 2 The Gutster Baby Bar is the ideal tool for demolishing floors and ceilings. Thanks to the nail puller on the back of the head, nails can be removed with ease. The new extra strong oval shaped handle is designed to be stronger and lighter and is ideal for working in tight spaces. The new extra strong, lightweight welded head has spear-shaped tips to get under the floor and behind the ceiling and is also great for drilling through plasterboard. Order the Gutster Baby Bar 762mm with nail puller now and make your demolition work a lot easier!

Heuer - Brockhaus table clamps

Technical data of the Heuer - Brockhaus table clamps Simply attach your vice to the table with this handy clamp.

Heuer - Brockhaus 120 mm. compact vise

Jaw width 120 mm. |Maximum opening 130 mm. |Clamping depth 65 mm. |

Heuer - Brockhaus vises with replaceable jaws

Jaw width 120 mm. |Maximum opening 150 mm. |Clamping depth 65 mm. |Jaw width 140 mm. |Maximum opening 200 mm. |Clamping depth 80 mm. |Jaw width 160 mm. |Maximum opening 225 mm. |Clamping depth 100 mm. |

Skandia bench vice 100mm

This Skandia vise 100 mm, also called parallel vise, is a tool in which a workpiece can be fixed, making it easier to work because these workpieces do not have to be held. In this way, operations such as sawing, drilling, filing, sanding, welding, grinding, etc. can be performed more freely. This vise is made of high-quality cast iron, painted black and has exchangeable hardened steel jaws and a small anvil. The vice can handle workpieces with a maximum thickness of 135 mm. Specifications: Article number: SKA1044375 Barcode: 8711562062178 Brand: SKANDIA Net weight (kg): 0

Irwin Quick-Adjusting Vice 5 "/ 125mm

(1)

Specifications: Article number: IR1978272 Barcode: 5706919782727 Brand: IRWIN Net weight (kg): 9.86

black steel pipe clamp / vises

Unloading mm. |Jaw width 100 mm. |Dimensions of the anvil section mm. |Maximum opening 110 mm. |Base diameter mm. |Unloading 60 mm. |HOH mounting size mm. |Dimensions of the anvil section 55 x 70 mm. |Dimensions mm. |Base diameter 190 mm. |HOH mounting size 163 mm. |Dimensions 380 x 110 x 230 mm. |Jaw width 125 mm. |Maximum opening 125 mm. |Unloading 65 mm. |Dimensions of the anvil section 65 x 80 mm. |Base diameter 200 mm. |HOH mounting size 172 mm. |Dimensions 430 x 140 x 245 mm. |Jaw width 150 mm. |Maximum opening 150 mm. |

Irwin Table vise / 75mm

(1)

The Irwin Bench Vise/75mm is perfect for clamping workpieces during machining. This solid vise comes with a practical swivel base for added versatility. The jaw width of 75 mm ensures that you can easily clamp different sizes of workpieces. With the Irwin Table Vise/75mm you get a high-quality product. This vise is equipped with robust materials and has a warranty period of no less than 5 years. So you don't have to worry about the reliability of this vice! Specifications: - Item number: IRTV75B - Bar code: 0734442001690 - Brand: IRWIN - Net weight (kg): 1.88 Most important features: - Jaw width of 75 mm - Equipped with a rotatable base - Made of high quality materials - Warranty period of 5 years Advantages: - Easy to clamp workpieces - Extra versatility thanks to the rotatable base - Solid vise for long-term use - High quality from the well-known IRWIN brand - 5 year warranty gives extra security Order the Irwin Table Vise/75mm today and enrich your workshop with this indispensable vice.

Irwin Cabinetmaker's vice / 175mm

(1)

Irwin Furniture maker's vice/175mm: The perfect addition to your workshop! Are you looking for a reliable furniture maker's vice? Then the Irwin Furniture Makers Vice/175mm is the perfect addition to your workshop! This Irwin brand vise is specially designed to meet the needs of the cabinet makers and woodworkers. With a part number of IRTV175B and barcode of 0734442029885, this joiner's vice guarantees that the quality and reliability are both top notch. The Irwin brand is known for its high-quality products and with a net weight of 5.62 kg, this vice is one of the best of its kind. If you are looking for a reliable cabinetmaker's vice to perfect your workshop, this Irwin Cabinetmaker's vice/175mm is the best choice. Below you will find a short summary of the specifications: Specifications: - Item number: IRTV175B - Bar code: 0734442029885 - Brand: IRWIN - Net weight (kg): 5.62 With this special vice from Irwin you are assured of a sturdy and reliable vice for working wood. Below we have listed the advantages of this furniture maker's vice in a handy HTML bulleted list: Advantages: - High Quality - Trustworthy - Specially designed for furniture makers and woodworkers - Perfect for woodworking - Sturdy and durable - Easy to use Don't hesitate any longer and add this Irwin Furniture maker's vice/175mm to your collection today for an optimal workshop experience!

HBM 10 KG Deluxe Anvil

This anvil of HBM has a total weight of ten kilograms. With a height of 155 millimeters, it is not too high. A handy tool during various, diverse activities. Characteristics 10kg cast iron powder coated anvil. Large polished upper surface. Dimensions (LxWxH) 270 x 120 x 140 mm Track width: 65 mm Track length: 130 mm