Tool boxes Products

HBM profi tool box with 3 drawers - black

Overall dimensions 534 x 218 x 287 mm. |Dimensions of the top storage compartment 532 x 215 x 58 mm. |

HBM profi tool box with 3 drawers - red

Overall dimensions 534 x 218 x 287 mm. |Dimensions of the top storage compartment 532 x 215 x 58 mm. |

Tactix IP65 Waterproof, Dustproof and Shockproof Polypropylene Case 34.5 x 29.5 x 15.5 cm

Feeling is knowing with these cases. As soon as you pick up and open one of these series of cases, you already know that they are the "patrons" of your fragile and valuable equipment. You can feel from everything that these cases can take a beating, while the very thick foam content convinces you that the same impact will hardly be felt by what is inside. The foam content is also pre-cut in a vertical direction so that this content actually consists of 1cm x 1cm rods, which you can "pluck" out with your finger to create openings that you can shape yourself and adapt to what this foam inserts. suitcase will be protected and transported. In addition to being impact-resistant and well-damped, the contents of these cases will also be protected against water. All equipment cases from this series are IP65, which means that the cases protect the contents against water jets. Swimming with the suitcase is therefore not recommended, but dust and splash water cannot reach the contents. These Tactix equipment cases / tool cases come in three sizes: Small - Article no. 9940: 23.5 x 19 x 12 cm Medium - Article no. 9941: 34.5 x 29.5 x 15.5 cm Large - Article no. 9942: 41.5 x 32.5 x 18.5 cm Because a well-sealed suitcase (such as this one) that is packed in a cold environment is difficult to open in a warm environment, because the pressure in the suitcase is then low compared to the outside pressure and the suitcase therefore "sucks itself shut", it has been this series of cases equipped with a pressure valve. This pressure valve ensures that the pressure inside the case is equal to the ambient pressure, so that the case can always be opened and you have access to the contents when you want it, and not when the (inside of the) case finally collapses. has warmed up. This situation occurs especially after an intercontinental flight in the hold of an aircraft. These cases are therefore very suitable for taking valuable and / or fragile equipment with you on a long journey. For the security of the contents of these equipment cases, these cases are also provided with holes for two padlocks next to each closure (not included). The hinges are also specially designed so that the st

HBM Professional 238 Piece Tool Case, Tool Trolley with Carbon Inlays

(1)

The HBM Professional 238-piece tool case with Carbon Inlays has a handy extendable handle and is equipped with wheels. This makes it easy to take the tools with you for a job on location and you always have all the tools within reach. The compact case has 4 compartments. This way the tools can be neatly organized, they stay in place when you take the case with you and the right tools can be found at a glance. The tool box contains all the basic tools for a job in and around the house. In short, an all-in-one case for jobs outside the door. Technical data of the HBM Professional 238 Piece Tool Case with Carbon Inlays. Dimensions (LxWxH) 498 x 390 x 222mm Weight 17.9kg Material aluminium The HBM Professional 238 Piece Tool Case with Carbon Inlays consists of: Box 1 13 x 1/4 4, 4.5, 5, 5.5 , 6, 7, 8, 9, 10, 11, 12, 13 and 14mm 8 x 1.4 6, 7, 8, 9, 10, 11, 12 and 13mm 2 x 1/4 bit socket PZ1, PZ2 2 x 1/4 bit socket PH1, PH2 3 x 1/4 bit socket 4.5.5, 7mm 4 x 1/4 bit socket 3,4,5,6 mm 5 x 1/4 bit socket T10, T15, T20, T25, T30 2 x 1/4 extension with hexagonal drive 50 and 100 mm 1 x 1/4 sliding t-bar 1 x 1/4 square screwdriver 150mm 1 x 1/4 universal joint 5 x 1/4 TX e-cap E4,E5,E6,E7,E8 16 x 1/2 10,11,12,13,14,15,17,19,20,21,22,23,24,27,30 and 32mm 6 x 1/2 12,13,14,15,17,99mm 5 x 1/2 E-cap E10,E11,E12,E14 and E16 1 X 1/2 Reversible Ratchet 72 Tooth 1 x 1/4 reversible ratchet 72 teeth 1 x extension 1/2 125 mm 1 x extension 1/2 250 mm 1 x 1/2 connection spark plugs 16 mm 1 x 1/2 socket for spark plugs 21 mm 1 x 1/2 sliding T-bar 1 x 1/2 universal joint Section 2 10 x ratchet wrench 6,8,10,11,12,13,14,15,17 and 19 mm 1 long nose pliers 1 side cutter 1 combination pliers 1 adjustable wrench 1 water pump pliers Box 3 12 x screwdriver SL6x38mm, 3x75mm, 5x100mm, 6x100mm, 6x150mm, 8x150mm, PH2x38mm, PH0x75mm, PH1x80mm, PH2x100mm, PH2x150mm, PH3x150mm 6 x insulated screwdriver SL3x75mm, SL4x100mm, SL5.5x125mm, PH0x75mm, PH1x100mm, PH2x100mm 7 x precision screwdriver SL2, 2.5, 3 mm, PH000, PH00, PHO, T5 Section 4 Level Scissors Tape measure Stanley knife crimping tool insulating tape Hammer claw hammer 9 allen keyssleutel 100 nails

HBM 535mm. Professional Steel Tool Box with 3 Layers and 5 Compartments

Are you looking for a robust and compact storage for your tools? Then this HBM steel tool box is the perfect solution for you. With 3 layers and 5 pockets, there is enough space for all your tools and the classic design offers great convenience and mobility on the go. Below you will find more information about this metal toolbox: Beautiful metal design Foldable design for optimum compactness Three layers high and five compartments wide Suitable for modern and classic tools Safe to use thanks to sturdy steel material and raised lip with padlock Handy extras Foldable handles for optimal mobility Handles can be folded down for ease of use Safe and robust Sturdy steel material offers maximum protection against damage and theft Raised lip with hole for padlock provides extra security when transporting or storing This HBM toolbox is not only safe and stylish, but also offers enough space for all your tools. Choose this professional toolbox and you can get started anytime, anywhere.

Stanley Tool trolley 53 liters

(1)

The Stanley tool trolley is a must-have for every handyman. With its extra large capacity, it is suitable for storing all your power tools and accessories. Special characteristics Extra large capacity for power tools Specifications Item number: 1-97-503 Bar code: 3253561975035 Brand: Stanley Net weight (kg): 5.72 Colour black Depth: 430mm Height: 603mm Material: Plastic Version: Tool box Padlock Shackle: No Removable compartment: Yes Signal red: No Total number of subjects: 3 Foldable: No Width: 375mm With lid: Yes With compartment separator: No With foam: No With handle: Yes With lock: No With closure: Yes With shoulder strap: No With tool board: No With wheels: Yes

tactix professional stainless steel tool case with removable storage trays

Overall dimensions 58,5 x 28,8 x 25,5 cm. |Internal dimensions 57,5 x 24 x 19 cm. |

ERRO Metal Toolbox 43cm, 5-piece

(1)

The Erro Storage 5-piece Tool Box is a classic and timeless tool box of good quality. This makes it a solid and reliable product that will not disappoint you. Tool tools of all shapes and sizes can be stored and organized in this toolbox. The box contains 1 large main compartment and 4 sub-compartments so that you can properly sort your tools. With this toolbox you never have to search for your tools again, which saves both effort and time while working. The advantages of this tool trolley •Made from metal which makes the product very sturdy and therefore durable in use. • Very user-friendly due to the self-evident method of use. • Takes up little space. •The suitcase can never open while carrying because the system closes itself when you lift the suitcase by both handles. • Can be opened very clearly so that you have a good overview of your entire collection of tools at a glance. •You can organize your tools very well through the 5 different bins, of which 1 large main bin and 4 sub-bins. •Very good value for money with this favorable price. What's in the package •Erro Storage 5-piece Toolbox Specifications •Brand: Erro Storage. •Size (cm): 21 x 21 x 43. •Color blue. •Material: metal. •5-piece.

ERRO Tool set 56-piece

(1)

The Erro56 is a high-quality tool set consisting of 56 parts. The tool is made of chrome-vanadium steel and will last for years. Specifications: Article number: ERRO56 Barcode: 8718309813628 Brand: ERRO Net weight (kg): 3.36

Stanley Click & Connect Deep Toolbox & Organizer

(1)

Tool case with organizer Click & Connect from Stanley. Special characteristics Unique design with ideal proportions for storing power tools, hand tools and accessories Specifications: Article number: STST1-71962 Barcode: 3253561719622 Brand: STANLEY Net weight (kg): 2.92

KWB Bitset 92-Piece Alum, Case

(1)

Power-Box, bits drive 1/4 "hexagon according to ISO 1173, C 6.3 and E 6.3, including bits with special head shapes, for use on electronic parts, housings, etc., bit holder with permanent magnet, 1/4" hexagonal shank according to ISO 1173, E 6.3, CV sockets Super Lock, long bit holder, ratchet handle with 1/4 “hexagon holder according to ISO 1173, in sturdy metal case Specifications: Item number: KWB106800 Barcode: 4009311068002 Brand: KWB Net weight (kg): 1,208

HBM 50 cm. tool case

Dimensions 500 x 270 x 240 mm. |Capacity 32 Ltr. |

BETA case with tools - 2120l-e / t91

Ratel 1/2 " 1/2 "kniegewricht Sockets 1/2 ", 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 27 - 30 - 32 mm Verlenging 1/2 ", 125-150 mm. Afbreekmes 18 mm, 1771 Steekringsleutel, 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 19 mm Inbussleutelset, 1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm Sleufkopschroevendraaiers, 4x30 - 2.5x50 - 3x75 - 4x100 - 5.5x125 - 6.5x150 mm. PH-schroevendraaiers, PH0x60 - PH1x80 - PH2x100 mm. Bitset, 860EA / 31 Dophouder 1/4, C900 AD Waterpompsleutel 250 mm, 1048 Zijsnijder 160 mm, 1082 CM Tangen 180 mm, 1150 cm Combinatietang 160 mm, 1166 CM

Crescent Prof 1-4en 1-2 Hand tool set 110 pcs

The Crescent Prof 1-4en 1-2 Hand Tool Set 110 pcs. is a complete set of quality tools for professionals. The set consists of 110 pieces of hand tools, including screwdrivers, pliers, wrenches, cutters, scissors and much more. The set is perfect for doing jobs in and around the house and is made of durable materials for a long service life. The set comes with a 2 year warranty. Specifications: Item number: CTK110NEU2 Bar code: 0037103322418 Brand: CRESCENT Net weight (kg): 0.8 Warranty: 2 years

Metal case U-910 with insert RAL 5010

The metal case U-910 with insert RAL 5010 from the A-brand Bott is an extremely suitable set for storing tools and associated accessories. With article number U-910, this box is supplied with an insert box RAL 500. The combination of box and insert box offers optimal space for all your tools and accessories. Metal case U-910 with insert RAL 5010 from the A-brand Bott Item number U-910 Including insert box RAL 500 Ideal for storing tools and accessories

Kraftwerk B143 Basic Allround-Alu-Tool Case 102 Piece

Kraftwerk B143 Basic Allround aluminum tool case 102-piece Allround aluminum tool case B143, 102 pieces, Kraftwerk 202.143.000 An all-round tool case for household, hobby and work with a well-sorted basic tool set in a compact case. The B143 case offers a selection of the most important tools for all kinds of repairs at home, in the office or even on the road in a motorhome or caravan. Universal tool case 102 pcs. equipped Compact case with a well-stocked basic set For household, hobby, caravan With 2 press studs and edge protection on the corners Modern design in silver / gray The B143 tool case replaces the Kraftwerk Junior Line 10 Basic tools in a compact case The ratchet, screwdriver and pliers are provided of the new, ergonomic 2-component handles in light / dark gray and also have a hanging hole. In addition, the screwdrivers have a marking on the end of the handle with the size and type of screwdriver. In addition to several pliers, screwdrivers, a hammer, a saw and a set of combination wrenches, a 3/8 inch ratchet with sockets, extensions, adapters and a removable bit box are included. A knee mat is also included. With this tool set you are well equipped for a wide variety of DIY jobs. And after use, the case can be stored in a space-saving manner. Order and functionality The tools are embedded in a foam insert in the bottom of the aluminum case. The tools on the shelves (screwdriver, combination wrench, pliers) are stored in pockets instead of loops. This makes it easy to remove and replace the tools. The case is closed with two snap closures. It is additionally protected by an edge protector on the corners. And the sturdy, ergonomically shaped handle ensures ergonomic use. Specifications Case dimensions (LxWxH): 37.5 x 32.5 x 16.0 cm Weight 8.3 kg Content: 1/4 "cap: 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 mm 3/8" socket: 10 - 11 - 12 - 13 - 14 - 15 - 17 - 18 - 19 - 22 - 24 mm 3/8" spark plug socket: 16 - 21 mm 3/8" extension 150 mm 3/8 "T sliding bracket adapter 3/8" universal joint 3/8" adapter for socket wrench 1/4" 3/8" reversible ratchet with 45 teeth 3/8" adapter to 1/4" Ring spanners: 8 - 10 - 11 - 12 - 13 - 14 - 17 - 19 mm 1/4" bit box 33 pieces 1/4" bit holder Slotted screwdriver: 5x100 - 6x100 mm Philips® screwdriver: 1x75 - 2x100 mm Voltage tester 100-250V GS tested Needle pliers 200 mm Combination pliers 180 mm Side cutter pliers 160 mm Water pump pliers 250 mm Adjustable wrench 250 mm / 10 "with graduations Universal saw bracket 150 mm Allen key set: 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 - 8 - 10 mm Snap-off blade 18 mm Replacement blades for snap-off blade 18 mm Tape measure 3 mx 16 mm DIN locksmith hammer 300 grams

ERRO Tool set 78 pieces

(1)

Erro tool case with large storage compartment for all types of tools. In addition, the tool box has an insert tray and an assortment compartment in the lid. Specifications: Article number: ERRO78 Barcode: 8718309812669 Brand: ERRO Net weight (kg): 5.3 E-mechanic kit: No. W + S mechanic kit: No. Number of bit inserts: 4 Number of combination wrenches: 0 Number of Phillips screwdrivers PH: 4 Number of hammers: 1 Number of open-end wrenches: 1 Number of pliers: 3 Number of ratchets: 1 Number of ring spanners: 1 Number of cap inserts: 9 Number of socket wrenches: 0 Packaging: Other Total number of tools: 78

Stanley Toolbox MP 20 inch

(1)

Tool case MP from Stanley: Special characteristics Metal / Plastic tool case for convenient storage and transport of tools with removable tool tray Specifications: Article number: 1-95-612 Barcode: 3253561956126 Brand: STANLEY Net weight (kg): 2.6 Color yellow Depth: 222 mm Height: 497 mm Material: Metal / plastic Version: Suitcase Padlock shackle: Yes Removable compartment: Yes Signal red: No. Total number of subjects: 3 Foldable: No. Width: 293 mm With lid: Yes With compartment separator: No. With foam: No. With handle: Yes With lock: No. With closure: Yes With shoulder strap: No. With tool board: No. With wheels: No.

Stanley Toolbox MP 23 inch

(1)

Tool case MP from Stanley: Special characteristics Metal / Plastic tool case for convenient storage and transport of tools with removable tool tray Specifications: Article number: 1-95-613 Barcode: 3253561956133 Brand: STANLEY Net weight (kg): 2.82 Color yellow Depth: 222 mm Height: 293 mm Material: Metal / plastic Version: Suitcase Padlock shackle: Yes Removable compartment: Yes Signal red: No. Total number of subjects: 3 Foldable: No. Width: 584 mm With lid: Yes With compartment separator: No. With foam: No. With handle: Yes With lock: No. With closure: Yes With shoulder strap: No. With tool board: No. With wheels: No.

ERRO Aluminum Case 457x330x152, black

Black aluminum case including single-sided tool board with tool holders and partitions to divide the case according to your own wishes. The case contains 2 steel closures and a handle. The load capacity of the case is 10 kg. Specifications: Article number: 15301 Barcode: 8420738914073 Brand: ERRO Net weight (kg): 2.32 Colour black Depth: 330 mm Depth range: 30 to 35 cm Height: 152 mm Height range: 0 to 25 cm Material: Aluminum Version: Suitcase Padlock shackle: No. Removable compartment: No. Rollable: No. Total number of subjects: 6 Foldable: No. Width: 455 mm Width range: 25 to 50 cm With lid: Yes With compartment separator: Yes With foam: No. With handle: Yes With lock: No. With closure: Yes With shoulder strap: No. With telescope handle: No. With tool board: Yes With wheels: No.

Stanley Suitcase 24 "with automatic locking

(1)

Stanley auto-locking tool case: Special characteristics Automatic locking when closing Specifications: Article number: 1-79-218 Barcode: 3253561792182 Brand: STANLEY Net weight (kg): 2.86 Colour black Depth: 595 mm Height: 260 mm Material: Plastic Version: Suitcase Padlock shackle: No. Removable compartment: Yes Signal red: No. Total number of subjects: 6 Foldable: No. Width: 281 mm With lid: Yes With compartment separator: No. With foam: No. With handle: Yes With lock: No. With closure: Yes With shoulder strap: No. With tool board: No. With wheels: No.

Stanley Suitcase 16 "with automatic locking

(1)

Stanley auto-locking tool case: Special characteristics Automatic locking when closing Specifications: Article number: 1-79-216 Barcode: 3253561792168 Brand: STANLEY Net weight (kg): 1.16 Colour black Depth: 162 mm Height: 220 mm Material: Plastic Version: Suitcase Padlock shackle: No. Removable compartment: Yes Signal red: No. Total number of subjects: 6 Foldable: No. Width: 394 mm With lid: Yes With compartment separator: No. With foam: No. With handle: Yes With lock: No. With closure: Yes With shoulder strap: No. With tool board: No. With wheels: No.

ERRO Aluminum folding case, 4 trays

(1)

The ERRO Storage EC3001 aluminum case is the ideal solution for various professions such as hairdressers and beauticians. Thanks to the fold-out design, this case offers a lot of storage space, while it is still nice and compact. Most important features: Folding aluminum case Net weight of 2.7 kg Color: silver Depth of 220 mm, with a range of 20 to 25 cm Height of 240 mm, with a range of 0 to 25 cm 5 boxes in total Width of 360 mm, with a range of 25 to 50 cm With lid and closure With handle for easy transport The ERRO Storage EC3001 is a well-known and used folding case for a reasonable price. It offers enough space for your necessary materials and tools, so that you can fully focus on your work. Thanks to the strong aluminum material, this case is also resistant to bumps and scratches, so it lasts a long time. Whether you are a hairdresser, beautician or other profession where you need many tools, the ERRO Storage EC3001 is the ideal solution. Order now and benefit from the excellent quality and functionality of this fold-out suitcase!

ERRO Tool case 28 "incl. Insert with wheels

(1)

This 28'' tool box from Erro is equipped with two large sturdy wheels and a handy pull-out handle. This makes it ideal for easily carrying all the necessary material. To make it even easier for you, a handy insert is included. This insert is perfect for storing small items and easy to place in the tool box. Specifications: Item number: ERRO817404 Bar code: 8718309817404 Brand: ERRO Net weight (kg): 4.36 Color: Silver Depth: 345mm Depth range: 30 to 35 cm Height: 355mm Height range: 25 to 50 cm Material: Plastic Version: Suitcase Padlock Shackle: No Removable compartment: Yes Rollable: Yes Total number of subjects: 3 Foldable: No Width: 595mm Width range: 50 to 75 cm With lid: Yes With compartment separator: No With foam: No With handle: Yes With lock: No With closure: Yes With shoulder strap: No With telescopic handle: No With tool board: No With wheels: Yes With this ERRO tool box you have all your necessities easily at hand. The sturdy wheels and the pull-out handle make transporting your material very easy. The supplied insert offers the possibility to store small material neatly and clearly. Order it today and get started right away!

ERRO 600 Tool case with insert and assortment box

Erro tool case with 2 assortment compartments in the lid. This plastic case contains a handy insert for screws or small tools. Specifications: Article number: ERRO817428 Barcode: 8718309817428 Brand: ERRO Net weight (kg): 1 Colour black Depth: 271 mm Depth range: 25 to 30 cm Height: 278 mm Height range: 25 to 50 cm Material: Plastic Version: Suitcase Padlock shackle: No. Removable compartment: Yes Rollable: No. Total number of subjects: 8 Foldable: No. Width: 547 mm Width range: 50 to 75 cm With lid: Yes With compartment separator: No. With foam: No. With handle: Yes With lock: No. With closure: Yes With shoulder strap: No. With telescope handle: No. With tool board: No. With wheels: No.

ERRO Profibox Tool case 28 "incl. Insert

Erro Profibox Tool case 28 "incl. Insert Specifications: Item number: ERRO817442 Barcode: 8718309817442 Brand: ERRO Net weight (kg): 3.58 Color: Silver Depth: 345 mm Depth range: 30 to 35 cm Height: 355 mm Height range: 25 to 50 cm Material: Plastic Version: Suitcase Padlock shackle: Yes Removable compartment: Yes Rollable: No. Total number of subjects: 3 Foldable: No. Width: 595 mm Width range: 50 to 75 cm With lid: Yes With compartment separator: No. With foam: No. With handle: Yes With lock: No. With closure: Yes With shoulder strap: No. With telescope handle: No. With tool board: No. With wheels: No.

ERRO ABS Case 460x330x150, black

The ERRO ABS case is a durable tool case from the ERRO brand. This case is ideal for storing and transporting your tools and accessories. Thanks to the combination of ABS and aluminum, this case is particularly sturdy and impact-resistant, so that your tools remain well protected. Specifications Item number: EC1601 Bar code: 5411209620121 Brand: ERRO Net weight (kg): 1.88 Colour black Depth: 330mm Depth range: 30 to 35 cm Height: 152mm Height range: 0 to 25 cm Material: Aluminium Version: Suitcase Padlock Shackle: No Removable compartment: No Rollable: No Total number of subjects: 6 Foldable: No Width: 462mm Width range: 25 to 50 cm With lid: Yes With compartment separator: Yes With foam: No With handle: Yes With lock: No With closure: Yes With shoulder strap: No With telescopic handle: No With tool board: Yes With wheels: No In short, the ERRO ABS case is the perfect solution for storing and transporting your valuable tools and accessories. Order it now and keep your tools safe and organized!

ERRO 700 Tool case with insert and assortment box

Erro Storage tool case. The tool case has a robust handle with ergonomic grip, so that it is easy to carry. The handle is made of plastic, just like the case itself. In addition, this tool box has a removable insert and at the top of the lid assortment options for small tools, such as screws, nails and plugs. Specifications: Article number: ERRO490578 Barcode: 8719497490578 Brand: ERRO Net weight (kg): 1 Color: Silver Depth: 289 mm Depth range: 25 to 30 cm Height: 328 mm Height range: 25 to 50 cm Material: Plastic Version: Suitcase Padlock shackle: No. Removable compartment: Yes Rollable: No. Total number of subjects: 8 Foldable: No. Width: 595 mm Width range: 50 to 75 cm With lid: Yes With compartment separator: No. With foam: No. With handle: Yes With lock: No. With closure: Yes With shoulder strap: No. With telescope handle: No. With tool board: No. With wheels: No.

Metal case U-700 with insert RAL 5010

With the metal case U-700 with insert RAL 5010 from the A-brand Bott you have a high-quality toolbox at home. With article number U-700, this set is supplied with an insert box RAL 500. The combination of a box and insert makes this set extremely suitable for large tools and associated accessories. The box is made of sturdy metal and is therefore particularly durable. The box has a sturdy closure, so you can safely store your tools. The advantages of this metal case U-700 with insert RAL 5010 from Bott at a glance: High-quality metal Including insert box RAL 500 Suitable for tools and associated accessories Equipped with a sturdy closure The metal case U-700 with insert RAL 5010 from Bott is an ideal solution for storing and transporting tools and associated accessories. Choose quality and durability and order this set today!

Hepco & Becker Tool case BASIC 470x220x360

(1)

The Hepco&Becker Tool Case BASIC 470x220x360 is a high-quality product from the HepcoBecker brand. This tool case is equipped with an integrated trolley system, making the case mobile. The case has 3 metal hinges and 2 metal closures, making it lockable with a combination lock. The Hepco&Becker Tool Case BASIC 470x220x360 has many advantages: A pocket for documents in the lid A partition wall with compartments for tools on two sides A bottom plate with tool compartments An aluminum frame for extra protection With the Hepco&Becker Tool Case BASIC 470x220x360 you can easily and safely transport all your tools and accessories. The case is made of high-quality materials and is resistant to bumps and scratches. The case is suitable for professional use and is easy to transport. Buy this high-quality Hepco&Becker Tool Case BASIC 470x220x360 now and enjoy the many benefits this case has to offer!