Welding Machines Products

HBM 200ARC Professional Smart Welder Inverter with Digital Display and IGBT Technology

The HBM 200ARC Professional Smart Welder Inverter with Digital Display and IGBT Technology is a fully automatic welding machine for arc welding with covered electrodes. With its IGBT technology and smart current control, this is a perfect welding inverter for both the less experienced and the professional welder. The inverter continuously measures the current flowing through the electrode and therefore senses when the electrode is pulled away from the weld. This automatically controls the run-out voltage curve. The desired welding current can be set with the rotary knob on the control panel. The inverter indicates on the digital display what the suitable diameter of the electrode is at the set current. During welding, an arrow on the display indicates when the start and end current curves are being run through. Thanks to its Smart technology, this very compact welding inverter is very suitable for the less experienced electrode welder who wants to weld with electrodes up to a diameter of 5 mm. Of course, a professional will also enjoy the piece of control technology of this inverter, which makes welding with this HBM 200 ARC very easy. Technical data of the HBM 200ARC Professional Smart Welder Inverter with Digital Display and IGBT Technology: Amperage min-max: 30 - 200. Welding tip diameter: 6MM. Mains voltage: 230 Volt. Open circuit voltage: 70 Volts. Output voltage: 28 Volts. Duty cycle at 200A: 60 %. Duty cycle at 155A: 100 %. Efficiency: 80%. Insulation class: F. Enclosure protection class: IP21. Weight: 4.64 Kg. Dimensions: 305 x 164 x 258mm. The HBM 200ARC Professional Smart Welder Inverter with Digital Display and IGBT Technology comes standard with: Anti-stick. Hot start. Electrode Pliers. Ground clamp. Digital display. Equipped with IGBT Technology. With the HBM 200ARC Professional Smart Welder Inverter with Digital Display and IGBT Technology you have a perfect welding inverter with which you can perform welding easily and smoothly.

AOK professional plastic, plastic welding machine

In many plastic parts such as panels, bumpers and housings you get cracks or holes after long use. Instead of purchasing a new part, you can now also repair your plastic parts yourself. How it works You fill the welding machine with butane, after which the machine melts the plastic electrodes. You weld precisely with the headpiece. The set comes in a luxury case. In addition to the welding machine and electrodes, the case also contains reinforcement mesh, with which you can make extra strong connections. Which plastics It is important that you use the same type of plastic electrode as the type of material. Standard PP (polypropylene) electrodes are supplied. The plastic welding machine is ideal for repairing plastic parts, such as bonnets, plastic furniture and car dashboards. In addition, it can also be used for many other objects. The device saves you a lot of costs! Suitable for Acrylonitrile Butadiene Styrene Polyethylene Polypropylene Polystyrene Contents of the set Plastic welding machine Set PP (polypropylene) electrode Stainless steel reinforcement mesh Various burner heads Order the AOK Professional Plastic, Plastic Welding Machine now and repair your own plastic parts!

HBM 200A Inverter with Digital Display and IGBT Technology Black

The HBM 200A Inverter with Digital Display and IGBT Technology Black is a high-quality inverter with IGBT technology. This machine is suitable for many purposes, such as welding car parts and other tasks in the workplace. The inverter is easy to set up and can be used by both the professional craftsman and the avid home hobbyist. Thanks to the compact size, you can easily place the inverter in the desired location and store the device after use. The MMA inverter has circuit structure according to board design, simple circuit and easy to maintain. The machine has automatic protection function for overcurrent, overheating and undervoltage. This inverter has hot arc function and stable output current, so its performance is reliable. The inverter is compact, lightweight and has easy operation and installation. The technical data of the HBM 200A Inverter with Digital Display and IGBT Technology Black are: Weight: 4.7 kg Frequency: 50/60 Hz Insulation class: F Power supply: 220 V No-load voltage: 56 V Nominal output voltage: 27.2 V Input current: 35.4 A Output voltage min max: 30-180V Dimensions: 305 x 146 x 258mm

HBM collets for HBM 200 tig / mos inverter and HBM tig 200 ac / dc inverter

All our products have a warranty of at least 1 year.

HBM long torch cover for HBM 200 tig / mos inverter and HBM tig 200 ac / dc inverter

All our products have a warranty of at least 1 year.

HBM professional welding manipulator 100 kg.

Voltage 230 Volt. |Frequency 50/60 Hz. |Power 80 Watt. |Rotational speed Van 0,2 tot 2 Rpm. |Diameter of the work table 350 mm. |Diameter of the hole in the work table Doorlopend 50 mm. |Horizontal loading capacity 100 Kg. |Vertical loading capacity 50 Kg. |

HBM professional welding manipulator 300 kg.

Voltage 230 Volt. |Frequency 50/60 Hz. |Power 120 Watt. |Rotational speed Van 0,2 tot 2 Rpm. |Diameter of the work table 450 mm. |Diameter of the hole in the work table Doorlopend 50 mm. |Horizontal loading capacity 300 Kg. |Vertical loading capacity 150 Kg. |

HBM professional welding manipulator 50 kg.

Voltage 230 Volt. |Frequency 50/60 Hz. |Power 60 Watt. |Rotational speed Van 1 tot 12 Rpm. |Diameter of the work table 300 mm. |Diameter of the hole in the work table Doorlopend 40 mm. |Horizontal loading capacity 50 Kg. |Vertical loading capacity 25 Kg. |

GYS Welding inverter GYSMI 160P, Ready-to-weld bundle

(1)

Inverter Technology, microprocessor controlled welding machine. Multifunction, will operate on a 16A-230V power supply. With its revolutionary technology, this compact device has a lot to offer, with the possibility to use many types of electrodes on direct current: stainless steel, rutile, basic and cast iron with a thickness of Ø 1.6 to 4 mm. The device is easy to set up with its rotary knob with a clear graph that shows you which setting you need for each job. The device is equipped with 3 functions that make welding easier: the hot-start function provides a starting current increase when switching on, the anti-sticking function ensures that the electrode does not stick or burn out and supports the arc-force function. for electrodes that are difficult to weld. Thanks to its low weight (4.2 kg), small size and low energy consumption, it is a very handy device.   Special characteristics Microprocessor controlled Suitable for basic, rutile, stainless steel and cast iron electrodes Electrodes from Ø 1.6 to 4 mm HOT-START, ANTI-STICKING and ARC-FORCE Supplied with electrode holder and earth clamp TIG welding possible Specifications: Article number: 5192013360 Barcode: 3154020013360 Brand: GYS Net weight (kg): 7.58 Connection voltage: 230 V. Infinitely adjustable: No. Degree of protection (IP): IP21 Frequency: 50/60 Hz Fuse protection (slow): 16 A. Height: 110 mm Length: 270 mm Max. amperage: 160 A. Max. electrode diameter: 5 mm Max. load capacity at 100% (electrode): 160 A. Execution: Welding machine MMA Number of stages: 1 Open-circuit voltage: 72 V. Operating temperature: -10 - 40 &: 176; C Suitable for tungsten electrode diameter: 1.6 - 5 mm Type: Inverter Weight: 4.2 kg Welding current (TIG): 10 - 160 A. Welding current (electrode): 10 - 160 A. Welding voltage (electrode): 20.4 - 26.4 V. Width: 170 mm Logo 2: Presentation document / presentation file: Instruction manual:

HBM 200MAX TIG Smart Welder Inverter with Digital Display and IGBT Technology

HBM 200MAX TIG Smart Welder Inverter with Digital Display and IGBT Technology. The HBM 200 TIG welding inverter is a fully automatic welding machine for TIG and MMA welding. The IGBT technology controls current and voltage based on measurements taken during the welding process. The current and voltage run through the ideal curves for both welding techniques, during all phases of the welding. TIG and MMA welding inverter with simple operation With the large round rotary knob, everything is set on this welding inverter. By pressing the button you can select which function you want to set the value for. You can set the value by turning the knob. The function is indicated by a small arrow that indicates the current function on the brightly lit display. This welding inverter has many functions! You can weld both TIG and MMA (electrode) with this welding inverter! IGBT technology for smart current regulation The IGBT (Insulated Gate Bipolar Transistor) technology means that the regulation of the current is done with a semiconductor. This semiconductor is able to switch the current on and off very quickly (PWM), so that the current intensity can be "dosed", as it were. This technique also enables rapid adjustments of the current intensity during welding. During the welding process, for example, the current can be adjusted on the basis of measurements in such a way that the welding process continues to run smoothly. Completely different start-up and run-out characteristics can also be followed, making this welding inverter suitable for both TIG and MMA. Adjustable Preflow and Postflow With TIG welding it is important that the welding process takes place under an “inert gas jacket”. The flow of the inert gas (often Argon) must therefore first have started and encapsulated the surface to be welded before the arc is ignited, otherwise the metal would burn immediately instead of melting. With the round knob you can easily set how many seconds (varying from 0 - 10 seconds) gas is supplied before igniting the arc. This is called the pre-flow. The time that the gas will continue to flow after the arc has been extinguished is also adjustable from 0-10 seconds. This time is called the post-flow and is intended to give the molten metal time to solidify while still being protected by the inert gas so that the metal will not burn. TIG spot welding function This 200 TIG smart welder can also be used for spot welding! Set the function to SPOT and keep the tip of the TIG nozzle a few millimeters away from the surface where the weld is to be. You can even buy special nozzles for this purpose, which support the tip on the surface a few millimeters away to make it even easier. Just pulling the trigger is enough to make a beautifully welded spot weld in two thin layers of sheet material pressed together! The TIG and MMA inverter that is suitable for beginners and professionals This very light and compact welding inverter is very suitable for the less experienced TIG welder due to its Smart technology. However, the professional will also enjoy the piece of control technology of this inverter, which makes welding with this HBM 200 TIG Smart Welder very easy. The complete version of this inverter, which includes a ground clamp, a TIG torch and an electrode clamp, ensures that you can get started quickly with this very versatile and entry-friendly welding inverter. Technical data of the HBM 200MAX TIG Smart Welder Inverter with Digital Display and IGBT Technology. Amperage min-max 8 - 200. Welding tip diameter 6MM. Mains voltage 230 Volts. Zero voltage 70 Volts. Input voltage 28. Duty cycle at 200A 60 %. Duty cycle at 155A 100%. Insulation class F. Weight 6.15 Kg. Dimensions 400 x 159 x 300 mm. Housing protection class IP21. The HBM 200MAX TIG Smart Welder Inverter with Digital Display and IGBT Technology is supplied as standard. Adjustable post-flow time. electrode pliers. Earth terminal. Digital display. Tig torch 2 stroke. High-frequency machine (HF) The electrode does not need to be ironed. Equipped with IGBT Technology Other specifications. This machine is not suitable for welding aluminum.

Stanley MMA welding machine 70-100 A - 230V E161

Stanley MMA welding machine 70-100 A - 230V E161 The Stanley MMA welding machine 70-100 A - 230V E161 is a professional welding machine with excellent quality and a long service life. This welding machine features high power and high power and is ideal for welding steel, aluminum, copper and other metals. The welding machine also features a compact, lightweight construction, making it easy to transport and use. The Stanley MMA welding machine is a professional welding machine with excellent performance and a long service life. Specifications: Item number: ST41111 Bar code: 8004386411117 Brand: STANLEY Net weight (kg): 12.74 Colour black Voltage (V): 230V Frequency (Hz): 50/60Hz The Stanley MMA welding machine 70-100 A - 230V E161 is a professional welding machine with excellent quality and a long service life. This welding machine features high power and high power and is ideal for welding steel, aluminum, copper and other metals. The welding machine also features a compact, lightweight construction, making it easy to transport and use. The Stanley MMA welding machine is a professional welding machine with excellent performance and a long service life. It is easy to operate and has high reliability. With this welding machine you can easily weld with high quality and high productivity. The Stanley MMA welding machine 70-100 A - 230V E161 is an excellent choice for professionals looking for a reliable, powerful and versatile welding machine. This welding machine features high power and high power, providing high quality welding. It is a professional welding machine with excellent performance and long service life. The welding machine also features a compact, lightweight construction, making it easy to transport and use. The Stanley MMA welding machine is a professional welding machine with excellent performance and a long service life.

GYS Welding machine PROTIG 200 DC HF, robust

(1)

GYS welding machine PROTIG 200 DC HF, robust: Gys presents the Protig P200 DC HF, a robust welding machine that delivers high-quality welds on mild steel and stainless steel. It is made for pipe fitters, boiler builders and service technicians. Advantages: Intuitive interface that makes it easy to set the parameters. High quality welds on mild steel and stainless steel. Made for pipe fitters, boiler builders and service technicians. Robust construction. The Gys Protig P200 DC HF is the perfect welding machine for professional users looking for a robust and reliable welding solution. The intuitive interface makes it easy to set parameters, making it an ideal welding machine for pipe fitters, boiler builders and service technicians. It produces high quality welds on mild steel and stainless steel. Choose the Gys Protig P200 DC HF for a robust and reliable welding solution, equipped with an intuitive interface for easy parameter setting.

HBM TIG 200 AC / DC Inverter With Digital Display and IGBT Technology

The HBM TIG 200 AC/DC Inverter is a high-frequency inverter, suitable for welding steel, stainless steel, alloy steel, carbon steel, copper and aluminum. Also suitable for welding with ordinary electrodes up to 4 mm thick, and for sheet thicknesses up to 10 mm. With its IGBT technology and digital display, this inverter is an excellent choice for professional use. The technical data of the HBM TIG 200 AC/DC Inverter are: Voltage: 230 Volts Capacity: 5.3 Kw Frequency: 50 - 60 Hertz No-Load voltage: adjustable 10 - 200 Amp Amperage rated duty cycle: 60 % AC duty cycle: 20 - 80% Pulse duty cycle: 10 - 90% Efficiency: 85% Duty cycle at 200A: 60 % Duty cycle at 155A: 100 % Insulation class: High Welding electrodes: 1.6 - 4 mm Fuse: 16 Amps Degree of protection: IP 21 ARC Starting (COS): 0.93 Weight: approx. 20 Kg Dimensions: 498 x 328 x 302mm The HBM TIG 200 AC/DC Inverter comes standard with a Tig torch 2 stroke/4 stroke, an electrode torch, coupling clamps, carbon dioxide hose, electrode holder, gas hose, gas regulator, earth clamp and manual.

HBM 230 CI MIG Inverter with Digital Display and IGBT Technology

The HBM 230 CI MIG Inverter with Digital Display and IGBT Technology is a powerful and reliable machine with an extensive set of technical data. With a power consumption of 21.2 A, a mains voltage of 230 Volt, a duty cycle at 200A of 60%, a duty cycle at 155A of 100%, an efficiency of 80%, a wire speed of 2 - 14 meters per minute, a wire diameter of 0 .8 - 1 mm, a maximum wire coil diameter of 200, 300 mm (5 and 15 KG coils), a welding tip diameter of 6 mm, an insulation class of F, an enclosure protection class of IP21, a weight of 17.3 Kg and dimensions of 50 x 22.5 x 40 cm, the HBM 230 CI MIG Inverter with Digital Display and IGBT Technology is the perfect solution for professional MIG welding. The HBM 230 CI MIG Inverter with Digital Display and IGBT Technology comes standard with: MIG Torch (2.5 Meters) Electrode Pliers (2.5 Meter) Mass cable with earth clamp (2.5 meters) Digital display Equipped with IGBT Technology Safety equipment The HBM 230 CI MIG Inverter with Digital Display and IGBT Technology is the perfect choice for professional MIG welding. With this machine you have a reliable, powerful and flexible machine that will be able to perform your welding tasks effortlessly.

HBM 200 CI Synergic Mig Welding Inverter with Digital Display and IGBT Technology

The HBM 200 CI Synergic is a small yet powerful welding inverter that uses the latest IGBT Inverter technology. It is a multi-process welding inverter with which you can weld three processes. It is a welding machine that the novice welder can use due to the 1-button operation and it will certainly not disappoint the experienced welder. Input voltage changes up to 15% no problem. Compact and easy to transport. Synergistic 1 button operation. Equipped with a clear, clear display. Technical data of the HBM 200 CI Synergic Mig Welding Inverter with Digital Display and IGBT Technology : Power consumption: 21.2(A) Mains voltage: 230 Volt. Duty cycle: 60% at 200 amps and 100% at 155 amps. Capacity Mig Mag welding: Up to 200 Amps. Fluxcore welding capacity: Up to 200 Amps. Capacity Electrode welding: Up to 160 Amps Lift Tig welding capacity: Up to 160 Amps Efficiency: 80%. Wire speed: 2 - 14 Meters per minute. Wire diameter: 0.8 - 1.0mm. Maximum wire spool diameter: 200mm. Only 5 KG rolls. Diameter of the welding tip: 6 mm. Insulation class: F. Enclosure protection class: IP21. Weight: Approx. 9KG Dimensions: 435 x 255 x 315mm. The HBM 200 CI Synergic Mig Welding Inverter with Digital Display and IGBT Technology comes standard with: Heavy Duty MIG Torch. (2.5 Meters) Electrode holder. (2.5 Meters) Earth cable with earth clamp. (2.5 Meters) Digital display. Equipped with IGBT Technology. Synergistic 1 button operation. Input voltage changes up to 15% no problem. Compact and easy to transport.

HBM 230 CI Synergic Mig Welding Inverter with Digital Display and IGBT Technology

The HBM 230 CI Synergic Mig Welding Inverter with Digital Display and IGBT Technology is a small yet powerful welding inverter that uses the latest IGBT Inverter technology. It is a multi-process welding inverter with which you can weld three processes. It is a welding machine that the novice welder can use due to the 1 Button operation and it will certainly not disappoint the experienced welder. Input voltage changes up to 15% no problem. Compact and easy to transport. Synergistic 1 button operation. Equipped with a clear, clear display. Technical data of the HBM 230 CI Synergic Mig Welding Inverter with Digital Display and IGBT Technology. Power consumption 21.2(A) mains voltage 230 Volts. Duty cycle at 200A 60%. Duty Cycle at 155A 100%. efficiency 80%. Wire speed 2 - 14 Meters per minute. Wire diameter 0.8 - 1mm. Maximum Wire Spool Diameter 200, 300mm. ( 5 and 15 KG Rolls ) Welding tip diameter 6mm. Insulation class f. Enclosure protection class IP21. Weight 17.3 kg. Dimensions 50 x 22.5 x 40 cm. Packaging dimensions 57 x 36 x 46 cm. The HBM 230 CI Synergic Mig Welding Inverter with Digital Display and IGBT Technology is supplied as standard. MIG Torch. ( 2.5 Meters ) electrode pliers. ( 2.5 Meters ) Ground cable with Earth clamp. ( 2.5 Meters ) Digital display. gas hose. Equipped with IGBT Technology

HBM MIG250 Professional Welding Machine with Digital Display and IGBT Technology

Technical data of the HBM MIG250 Professional Welding Machine with Digital Display and IGBT Technology. mains voltage 230 Volts. Zero voltage 59 Volts. Amperage min-max 50 - 250. Duty Cycle at 250A 60%. Duty Cycle at 193A 100%. Power consumption 60% / Maximum 10 / 11.5 Kw. Capacity Steel Welding wire 0.8 - 1mm. Stainless steel welding wire capacity 0.8 - 1mm. Capacity Aluminum Welding Wire 0.8 - 1.2mm. Wire speed 3 - 23 Meters per minute. Maximum Wire Spool Diameter 270mm. Only 15 KG Rolls. Welding tip diameter 6mm. Control modes 4. Insulation class f. Security class IP21. mains fuse 20 Ampere. Dimensions with wheels 870 x 450 x 880mm. Dimensions without wheels 870 x 330 x 610mm. Weight 41 kg. The HBM MIG250 Professional Welding Machine with Digital Display and IGBT Technology is supplied as standard. Detachable Torch. Earth terminal. Digital display. Equipped with IGBT Technology Other specifications. Single-phase, fan-cooled welding machine for professional MIG-MAG welding. Thermal protection. Universal use for different types of materials such as steel, stainless steel and aluminum.

HBM 155 MIG Inverter with IGBT Technology

Technical data of the HBM 155 MIG Inverter with IGBT Technology. Amperage MMA min-max 30 - 155. Amperage MIG min-max 30 - 155. mains voltage 230 Volts. Zero voltage 52 Volts. Input voltage MMA 33.2. Input voltage MIG 26.5. Duty Cycle at 155A 60%. Duty cycle at 120A 100%. Wire speed 2 - 15 Meters per minute. Wire diameter 0.6 - 0.8mm. Maximum Wire Spool Diameter 100mm. Welding Tip Diameter 6mm. Insulation class f. Enclosure protection class IP21. Dimensions 36 x 17.5 x 30 cm. Packaging dimensions L x W x H 45 x 33.5 x 26.5 cm. Weight 9.97 kg.

HBM 200 TIG Inverter with Digital Display and IGBT Technology

The HBM 200 TIG Inverter with Digital Display and IGBT Technology is the perfect choice for professionals and experienced do-it-yourselfers. This welding inverter is equipped with IGBT technology so that the current strength is automatically dosed accurately during welding. As a result, the welding process always runs smoothly. The welding inverter is easy to operate with the rotary knob and all settings can be easily set and read on the digital display. The HBM 200Tig inverter is equipped with a high-frequency ignition, so that the electrode does not have to be touched during electrode welding. Thanks to the robust handle, you can easily take this welding inverter with you to a job. View the technical data of the HBM 200 TIG Inverter with Digital Display and IGBT Technology below: Weight: 6.6 kg Frequency: 50/60 Hz Insulation class: F Power supply: 220 V No-load voltage: 56 V Nominal output voltage: 17.2 V Input current: 15.5 A Output current min max: 8 - 180 A Dimensions: 378 x 159 x 298mm With the HBM 200 TIG Inverter with Digital Display and IGBT Technology you can always count on a smooth welding process. Order this professional welding inverter today!

HBM 120A Welding Inverter, Welding Machine with Digital Display

This very compact welding inverter from the HBM brand is the ideal welding machine for more precise welding. With this inverter you can arc welding with a shielded electrode, or “electric welding” with a coated electrode up to a diameter of 3.2 mm. With the rotary knob on the front panel you can easily set the desired current. The set current is then clearly displayed on the LED display. You need about 30 Amps per mm (diameter) of the welding electrode as a rule of thumb. This makes this welding machine very suitable for the easily available electrodes of 1.6 and 3.2 mm. This welder is beautifully light and therefore very portable. It is very suitable for on-site welding of thin materials such as sheet steel and profiles. Product specifications of the HBM 120A Welding Inverter, Welding Machine with Digital Display Minimum welding power: 10A Maximum welding power: 120A Duty cycle 60%: 120A Duty cycle 80%: 104A Duty cycle 100%: 80A Minimum electrode thickness: 1.6 mm Maximum electrode thickness: 3.2 mm

GYS Welding inverter GYSMI E200 FV with case

(1)

Inverter Technology, microprocessor controlled welding machine with digital display. Multifunctional, will run on a 16A-230V power supply, even for heavy duty use. With its revolutionary technology, this compact device has a lot to offer, with the possibility to use many types of electrodes: steel, stainless steel, rutile, basic and cast iron, with a thickness of Ø 1.6 to 5 mm. The device is easy to set up with a clear graph that shows you which setting you need for each job. The device is equipped with 3 functions that make welding easier: the hot-start function increases the starting current when switched on, the anti-stick function prevents the electrode from sticking or annealing and supports the arc-force function for electrodes that are difficult to weld. Special characteristics Microprocessor controlled Suitable for steel, basic, rutile, stainless steel and cast iron electrodes Electrodes from Ø 1.6 to 5 mm HOT-START, ANTI-STICKING and ARC-FORCE Power factor correction Variable voltage possible Supplied with electrode holder and ground terminal TIG welding possible Specifications: Item number: 5192031210 Barcode: 3154020031210 Brand: GYS Net weight (kg): 8.82 Connection voltage: 230 V Infinitely adjustable: No Degree of Protection (IP): Other Frequency: 50/60 Hz Fuse (slow): 20 A Height: 140mm Length: 270mm max. load capacity at 100% (TIG): 200 A max. load capacity at 100% (electrode): 200 A Version: Welding machine MMA Number of phases: 1 Open circuit voltage: 96 V Operating Temperature: -10 - 40 &: 176;C Suitable for tungsten electrode diameter: 1.6 - 5 mm Type: Inverter Weight: 9.3kg Welding Current (TIG): 10 - 130 A Welding current (electrode): 10 - 200 A Welding voltage (TIG): 10.4 - 15.2 V Welding voltage (electrode): 20.4 - 28 V Width: 210mm Logo 2: Presentation document/presentation file: Manual:

GYS Welding inverter Smartmig 142, MIG/MAG

(1)

GYS Welding inverter Smartmig 142, MIG/MAG With the GYS Welding Inverter Smartmig 142, MIG/MAG you can easily and intuitively weld steel and stainless steel. Due to the low weight of 23.3 kg, the device is ideal for home use. With 4 positions and one button for the welding wire feed, the Smartmig is easy and quick to set up. With the graph you can quickly read which setting is required for your work. Special characteristics Single phase 140A welding machine Lightweight and portable Suitable for steel and stainless steel Low energy consumption Suitable for Ø 100 and 200 mm wire bobbins Welding with and without gas Overheating protection by fan Fixed welding torch and earth clamp Specifications Item number: 5192033153 Bar code: 3154020033153 Brand: GYS Net weight (kg): 22.5 Connection voltage: 230 V Infinitely adjustable: No Degree of protection (IP): Other Frequency: 50/60 Hz Fuse (slow): 13 A Height: 380mm Length: 420mm max. load capacity at 100% (electrode): 140 A Design: Welding machine MIG/MAG Number of stages: 1 No-load voltage: 39 V Operating Temperature: -10 - 40 &: 176;C Type: Traditional Voltage type: AC/DC Weight: 21 kg Welding current (electrode): 40 - 140 A Width: 240mm Logo 2: Presentation document/presentation file: Manual:

GYS Welding inverter Smartmig 162, MIG/MAG

The GYS Welding Inverter Smartmig 162 MIG/MAG is a single-phase welding machine with a capacity of 160A. Thanks to the wheels, the device is easy to move. The device is suitable for welding steel, stainless steel and aluminium. With the intuitive "Smart" solution, the device is easy and quick to set up. The device is equipped with a strong 40W wire feeder, which ensures a constant wire feed. The Smartmig has 4 positions and one button for the welding wire feed. The following features make the Smartmig 162 MIG/MAG special: Easy to move Suitable for steel, stainless steel and aluminum Low energy consumption Suitable for Ø 100 and 200 mm wire bobbins Welding with and without gas Overheating protection by fan Supplied with removable welding torch and earth clamp The Smartmig 162 MIG/MAG has an item number of 5192033160 and a barcode of 3154020033160. The net weight is 28.13 kg. The connection voltage is 230 V and the frequency is 50/60 Hz. The fuse is 16 A. The height, length and width are 450 mm, 540 mm and 330 mm respectively. The max. load capacity at 100% is 160 A. The operating temperature is -10 - 40 &: 176;C. The welding current varies between 30 and 160 A. The Smartmig 162 MIG/MAG is supplied with a manual and a presentation document.

GYS Welding inverter GYSMI E163, MMA, with accessories

The GYS welding inverter GYSMI E163, MMA, with accessories is a robust device from the GYS brand, which is equipped with the latest electronic technology and guarantees professional welding results. The device effortlessly welds steel, cast iron and stainless steel up to a thickness of 10 mm. With this device, the welder has 3 welding procedures at his disposal: MMA, MMA Pulse and TIG lift, which, thanks to the soft melt, guarantee an optimal welding result. Special characteristics: Welds most types of coated electrodes with ease: steel (rutile and basic), stainless steel and cast iron (up to Ø 4.0 mm) (MMA) Specifications: Item number: 5192036635 Bar code: 3154020036635 Brand: GYS Net weight (kg): 3.7 Connection voltage: 230 V Infinitely adjustable: No Degree of protection (IP): IP21 Frequency: 50/60 Hz Fuse (slow): 16 A Height: 134mm Length: 250mm max. load capacity at 100% (TIG): 160 A max. load capacity at 100% (electrode): 200 A Design: Welding machine MMA Number of stages: 1 No-load voltage: 72 V Operating Temperature: -10 - 40 &: 176;C Suitable for tungsten electrode diameter: 1.6 - 4 mm Type: Inverter Voltage type: AC/DC Weight: 3.7 kg Welding current (TIG): 10 - 160 A Welding current (electrode): 10 - 160 A Welding voltage (TIG): 10.4 - 16.4 V Welding voltage (electrode): 20.4 - 26.4 V Width: 190mm

STANLEY Welding machine plus 160A +11Din mask

This Stanley MMA invert welder is the perfect choice for any professional welder. It is fast, reliable and equipped with the latest technologies to simplify the welding process. The welding intensity can be adjusted from 0 to 160A, making it suitable for, among other things, welding thicker metal. The diameter of the electrodes can vary from 1.6 to 4 mm. The supply voltage is 230V and the no-load voltage is 90V. The device has a protection class of IP21S and is compatible with a 7.9 KVA generator. Weld intensity: 0 - 160A Diameter of electrodes: 1.6 to 4 mm Supply voltage: 230V No-load voltage: 90V Protection class: IP21S Compatible generator: 7.9Kva Compact and very light (dimensions L 235 x D 105 x H 150 mm - net weight 2.8 kg) Easier welding: anti-stick (no more sticking), arc force (current modulation), hot start (easy ignition). Included accessories: electrode holder clamp, ground clamp, hammer brush, 10 electrodes, carrying case and a DIN11 auto-darkening mask. EAN/GLN code: 8004386614426 Weight: 6.80 kg The Stanley Welder plus 160A +11Din mask is very light and compact, with a net weight of only 2.8 kg. The device is equipped with anti-stick (no more sticking), arc force (current modulation) and hot start (easy ignition) functions, making welding simple and hassle-free. The device comes with accessories such as an electrode holder clamp, grounding clamp, hammer brush, 10 electrodes, carrying case and a DIN11 automatic darkening mask. If you are looking for a welder with excellent value for money, this welder from Stanley is a fantastic choice. Buy it now and experience the benefits of a high-quality welding machine.

STANLEY Mig welding machine 130A

STANLEY Mig welding machine 130A With this Stanley welder made in Italy you enable continuous wire welding without gas (MOG), which guarantees good performance and a pleasant ease of use. The welding machine is ideal for welding body panels and is equipped with a fully insulated direct torch, allowing you to work safely and comfortably. Mains voltage: 230V / 50-60Hz Power consumption: 2.8kVA / 2.6Kw Power consumption: 0.8kVA / 0.8kW Open circuit voltage: 18/25V Welding current: 35 to 95A (130max) Duty cycle: 6 to 95A Supplied with a 0.9mm thread spool Protection: IP21S Length of the ground clamp cable: approx. 150cm Torch cable length: about 2M Product dimensions: 140x328x375mm Net Weight: 12.5kg The Stanley Mig welding machine 130A has an EAN/GLN code of 8004386107409 and weighs 13.50 kg. The welding machine can be used with cored wire from 0.8 to 1 mm.

STANLEY Inverter welding machine 130A

This Stanley inverter welder, made in Italy, is an adjustable welding machine with a power between 35 and 130A. This machine is light and compact and easy to move. Thanks to the inverter technology, clean and continuous welding is possible. Functions: Mains voltage: 230V / 50-60Hz Power consumption: 5.5kVA / 4.2Kw No-load voltage: 20V Welding current: 35 - 130A Duty cycle: 10 - 130A Duty Cycle: 130A @30% Protection: IP21S Electrodes: 1.6 to 3.25 mm Generator Compatibility: 8.5KVA Dimensions: W 235 x D 105 x H 150 mm Net Weight: 2.7kg Easier welding: anti-stick (no more sticking), arc force (current modulation), hot start (easy ignition). This welder comes with an electrode holder clamp, ground clamp, hammer brush and a mask. The product has an EAN/GLN code of 8004386613313 and weighs 5.00 kg. Order this Stanley inverter welding machine 130A now and enjoy clean and continuous welding!

GYS Welding inverter GYSMI 130P, case, MMA

(1)

Inverter Technology, microprocessor controlled welding machine. Multifunctional, will operate on a 16A-230V power supply. With its revolutionary technology, this compact device has a lot to offer, with the possibility to use many types of electrodes on direct current: stainless steel, rutile, basic and cast iron with a thickness of Ø 1.6 to 3.2 mm. With its rotary knob, the device is easy to set up with a clear graph that shows you which setting you need for each job. The device is equipped with 3 functions that make welding easier: the hot-start function increases the starting current when switched on, the anti-stick function prevents the electrode from sticking or annealing and supports the arc-force function for electrodes that are difficult to weld. Thanks to its low weight (2.9 kg), small size and low energy consumption, it is a very handy device. Special characteristics Microprocessor controlled Suitable for basic, rutile, stainless steel and cast iron electrodes Electrodes from Ø 1.6 to 3.2 mm HOT-START, ANTI-STICKING and ARC-FORCE Supplied with electrode holder and ground terminal TIG welding possible In handy case View the datasheet here View the manual here Specifications: Item number: 5192029972 Barcode: 3154020029972 Brand: GYS Net weight (kg): 5.56 Connection voltage: 230 V Infinitely adjustable: No Degree of Protection (IP): IP21 Frequency: 50/60 Hz Fuse (slow): 13 A Height: 100mm Length: 250mm Max. load capacity at 100% (electrode): 130 A Version: Welding machine MMA Number of phases: 1 Open circuit voltage: 80 V Operating Temperature: -10 - 40 &: 176;C Suitable for tungsten electrode diameter: 1.6 - 3.2 mm Type: Inverter Weight: 2.9 kg Welding current (electrode): 10 - 130 A Welding voltage (electrode): 20.4 - 25.2 V Width: 170mm Logo 1: Presentation document/presentation file: Instruction manual:

HBM Professional Digital Socket Welder 20 - 63 mm. 800 watts

If you want to weld thermoplastic tubular elements, sleeves and fittings, you need a sleeve welding machine. This HBM Digital Socket Welder is versatile and has a range of 20 - 63 mm. And comes with various accessories. The socket welding machine is particularly suitable for PE, PB, PE-X and PP-R piping, plastic pipes and plastic pipes. The welding and processing temperature is controlled from 0 to 300 ° C via the freely adjustable thermostat. Product specifications: Power: 800 W Voltage: 230 V Frequency: 50 Hz Suitable for: PE, PB, PE-X, PP-R plastic Range: 20 - 63mm Working temperature: 0 - 300 °C Power Cord: 1.8M Case material: iron Supplied as standard: 1 Allen key 6 screws (8 x 30mm) 12 Plastic attachments 1 pair of gloves 1 measuring tape (3 M) 1 pair of scissors 1 spirit level 1 iron support 1 storage case With this HBM Professional Digital Sleeve Welding Machine you can easily and quickly weld thermoplastic tubular elements, sleeves and fittings. The device is versatile and comes with various accessories, so you can get started right away. The welding and processing temperature is freely adjustable from 0 to 300 ° C, so you can adjust the device precisely to the materials you want to weld.

Hyundai welding machine MMA-161N

With the HYUNDAI welding machine MMA-161N you can efficiently join steel, stainless steel, aluminum and other metals with a beautiful finish. This lightweight single-phase MMA/BMBE welding machine features high efficiency and thermal protection thanks to its single-sided PCB structure and IGBT inverter technology. Features of the HYUNDAI Welding Machine MMA-161N IGBT inverter technology Warm start, non-stick Built-in arc force Crabs TIG Digital image Electrode holder with 2 meter cable Ground clamp with 1.2 m cable Input current: 6.5kVa Output Current: 10-160A Protection class: IP21S With the MMA-161N you have few sparks at the start of arc welding. The hot start function provides a current pulse when the plasma arc is struck, so that the electrode starts easily, even in difficult conditions such as a wet electrode. With arc force, the arc remains stable during welding, so the plasma arc does not fail and the electrode does not stick. Even if the electrode does stick to the workpiece, the anti-stick function helps to easily release the electrode without the electrode fusing with the workpiece. This HYUNDAI inverter welding machine MMA-161N is suitable for durable and professional use. The EAN code is 8718502569070 and the device weighs 6.5 kg.