Plate rollers Products

HBM 40 mm tube roller, profile roller

The HBM 40 mm Tube roller, Profile roller is a handy tool for light work on a workbench or base. With this tube roller you can bend flat strip, steel, copper and aluminum with the following maximum capacities: Steel: 20 x 20 x 1.2mm / 25 x 25 x 1.2mm / 30 x 30 x 1.5mm / 40 x 40 x 1.5mm Copper: 20 x 20 x 1.5mm / 25 x 25 x 1.5mm / 30 x 30 x 1.75mm / 40 x 40 x 1.5mm Aluminium: 20 x 20 x 1.75mm / 25 x 25 x 1.75mm / 30 x 30 x 2mm / 40 x 40 x 1.75mm The minimum radius is 180 / 170 / 200 / 220mm, and the minimum diameter is 450 / 500 / 550 / 600mm.

HBM 2.5 x 300 mm. plate roller for the vice

(1)

Maximum working width 300 mm. |Maximum rolling capacity over the entire working width 2,5 mm. |Diameter of the rollers 32 mm. |

HBM 1015 mm. roller, set and cut combination with 2 arms model 2

Maximum cutting capacity in steel 1 mm. |Width of the fingers 25 - 50 - 75 - 150 - 200 - 250 - 300 mm. |Maximum working width 1015 mm. |Diameter of the rollers 42 mm. |Maximum seating angle 90 graden. |

HBM 1 x 610 mm. plate mill

Maximum working width 610 mm. |Maximum rolling capacity over the entire working width 1 mm. |Diameter of the rollers 38 mm. |

HBM 305 mm. roll, set and cut combination

(1)

Maximum cutting capacity in steel 1 mm. |Width of the fingers 25 - 50 - 75 - 75 - 105 mm. |Maximum working width 305 mm. |Diameter of the rollers 38 mm. |Maximum seating angle 90 graden. |

HBM 760 mm roller, set and cut combination including 2 arms

Maximum cutting capacity in steel 1 mm. |Width of the fingers 25 - 50 - 75 - 150 - 200 - 250 mm. |Maximum working width 760 mm. |Diameter of the rollers 42 mm. |Maximum seating angle 90 graden. |