HBM mini polishing drum

With the HBM Mini Polishing Drum you can easily and quickly polish your metal objects. This drum is specially designed for drum polishing of metal objects such as jewellery, coins and watch cases. The drum has a diameter of 11.5 cm and a height of 11.5 cm and has a capacity of 1.44 litres. The motor has a power of 16 Watt and works on 230 Volt. The speed of the motor is 2700 O/min and the speed of the drum is 60 O/min. The HBM Mini Polishing Drum has a safety class of IP40.

Cleaning the balls: For new balls, first degrease them in ammonia and allow to tumble for about 2 hours with the addition of polishing soap, but without articles. Liquid level approx. 1 cm above the filling, also in rotating position. THEN RINSE WELL UNDER RUNNING WATER. Drum Polishing: Fill the drum halfway with polishing balls (or an assortment) and top up to three quarters of its capacity with items. Add water up to 1 cm above the filling, also in rotating position. Add polishing soap. Average drum time, depending on the desired result, is approximately 5 hours. After use, rinse the balls well and store them under water with the addition of polishing soap. If you do not use the polishing drum for a longer period of time, it is advisable to rinse the balls well and dry them well.

• Suitable for drum polishing metal objects such as jewellery, coins and watch cases
• Drum diameter: 11.5 cm
• Drum height: 11.5 cm
• Content: 1.44 litres
• Motor power: 16 Watt
• Voltage: 230 Volts
• Engine speed: 2700 O/min
• Drum speed: 60 O/min
• Protection class: IP40

Technical data

• Drum diameter: 11.5 cm
• Drum height: 11.5 cm
• Content: 1.44 litres
• Motor power: 16 Watt
• Voltage: 230 Volts
• Engine speed: 2700 O/min
• Drum speed: 60 O/min
• Protection class: IP40

NB:

The HBM Mini Polishing Drum is supplied without the polishing balls shown. These are for illustrative purposes only and optionally available in various variants.

Article number: 992-E