Steinel Sensor Outdoor lamp L 20 S stainless steel

Modern design for your exterior facade. With a timeless perfection. The L 20 outdoor sensor light burns beautifully and regularly. The simple design and inviting mood lighting are especially suitable for driveways, facades and side entrances. Thanks to its modern appearance and the large, adjustable detection area, it is a real highlight on any wall and also saves a lot of energy. Moreover, the lamp can be mounted so quickly and easily that your neighbor will not even notice.

Special characteristics

• Ideal for house fronts and entrances
• Range up to 10 m
• Time and start level adjustable

Specifications:
Article number: 566814
Barcode: 4007841566814
Brand: STEINEL
Net weight (kg): 1.05
Beam angle: Extremely wide beam> 80 &: 176;
Housing color: Stainless steel
Light color: White
Conductor diameter: 2.5 mm &: 178;
Connection method: Other
Cover luminaire with thermal insulation material possible: No.
Degree of protection (IP): IP44
Dimmable: No.
Dimmable 0-10 V: No.
Dimmable 1-10 V: No.
Dimmable DALI: No.
Dimming depending on ballast: No.
Dimmable DMX: No.
Dimmable DSI: No.
Dimmable GPRS: No.
Dimmable LineSwitch: No.
Dimmable mains voltage modulation: No.
Manufacturer specific dimming: No.
Dimmable trailing edge: No.
Dimmable leading edge: No.
Dimmable with potentiometer (integrated): No.
Programmable dimming: No.
Dimmable RF: No.
Dimmable Sine Wave Reduction: No.
Dimmable Touch and Dim: No.
Dimmable with push-button: No.
Dimmable Zigbee: No.
Energy efficiency: 235; nce class of the built-in lamp: A ++, A +, A (LED)
Energy efficiency: 235; nce class of the included exchangeable bulb: A ++
Glow wire test according to IEC 60695-2-11: 650 &: 176; C - 30 s
Height / depth: 250 mm
Highest energy efficiency class of the exchangeable lamp: A ++
Impact resistance: IK07
Lamp holder: E27
Lamp type: Other
Length: 85 mm
Light diffuser: None
Light emission: Direct / indirect
Light distribution: Symmetrical
Lowest energy efficiency class of the exchangeable lamp: A.
Lighting fixture with limited surface temperature "D-mark": No.
Cover material: Plastic opal
Housing material: Stainless steel (SS)
Max. follow-up time: 35 min
Max. mounting height: 3 m
Max. system power: 60 W.
Max. range frontal: 2.52 m
Max. range sideways: 2.52 m
Min. follow-up time: 8 s
Execution: Outdoor fixture
Not dimmable: Yes
Nom. voltage: 230 - 240 V.
Number of poles: 2
Protection class: II
Nom. ambient temperature according to IEC62722-2-1: -20 - 40 &: 176; C
Response brightness: 2 - 2000 lx
Sensor type: Passive infrared
Suitable for flush mounting: No.
Suitable for ceiling mounting: No.
Suitable for emergency lighting: No.
Suitable for lamp power: 60 - 60 W.
Suitable for light line configuration: No.
Suitable for number of lamps: 1
Suitable for surface mounting: Yes
Suitable for pendant suspension: No.
Suitable for wall mounting: Yes
Suitable for VDU workshop according to EN 12464-1: No.
Housing surface protection: Other
Ballast: Not necessary
Grid version: None
Wiring type: Suitable for through wiring
Voltage type: AC
Width: 230 mm
With air slots: No.
Ballast included: Yes
With light sensor: Yes
With light source: No.
With motion sensor: Yes
Instruction manual:
Energy label:
Other document:
Presentation document / presentation file:
Certificate:
Logo 2:

Article number: 8807-E